NEW
Font size
WorksheetsSafety Test - Planer
Total questions: 10
Worksheet time: 5mins
Before using the Planer, you should:
Ask Instructor's permission
Remove All jewelry, eliminate loose clothing, and confine long hair
Wear approved safety glasses
All of the above
If the machine is not working properly, or sounding proper, you should:
Immediately shut off the power and inform your instructor
Keep using the machine, until it breaks down
Turn off the machine
All of the above
When feeding boards into the planer, you should
go against the grain of wood
go with the grain of wood
go either with the grain or against the grain, it doesn't matter.
All of the above
When feeding boards into the planer you should:
Not force boards
Keep hands off boards
Allow the power feed to operate
All of the above
Do not attempt to plane a piece that is:
Longer than the distance between the rollers
Going with the grain of wood
Shorter than the distance between the rollers
None of the above
When selecting the depth of cut and cut rate, you should:
select the proper depth and rate depending on the stock being planed
Do not exceed 1/16" per pass
Both are correct
To remove a board that is stuck, you should:
A. Pull hard to dislodge the board
B. Shut off the planer
C. Once the planer comes to a complete stop, lower the table
D. Both B & C
It's ok to stand directly behind the board being planed, kickback does not happen with a planer.
True
False
_______________ look into the throat of the planer while it's running or in operation.
Always
Never
Sometimes
Occasionally
When finished using the planer, you should:
A. Turn off the machine
B. Wait for it to come to a complete stop
C. Clean the machine
D. A, B, & C in that order only.
E. A, B & C in any order
