What is the effect on the victim if he is touches a 100milli-Ampere currents?

The inner resistance of a human body is about:

Which is not a common cause of electrical accidents?

Sample of an effect of electrical hazards.

What instrument will you use to confirm that circuits are “dead”?

An item of electrical test equipment used to determine if an electrical path can be established between two points.

It is a part of a clamp meter that freezes the display reading. Reading is released when button is pushed a second time.

What is this symbols or button (below)?

What would the continuity tester do when a complete electrical path (between two points) is detected?

Clamp meter are primarily used for: (click that applies)

What instrument is this?

What instrument is this?

What instrument is this?

What instrument is this?

It is a part of a clamp meter that removes dc offset from dc current measurements. Also serves as dial’s shift button to select yellow functions scattered around the dial.

Also known as a VOM (volt-ohm-milliammeter) and use a micro-ammeter with a moving pointer to display readings.

Why would you adjust the knob in Analog Multi-meter when the input terminals are shorted (the black probe touches the red probe)?

It is a part of a DMM that show the value of the measure voltage (ac or dc), current or resistance.

What is the reading in the Analog Multi-meter, when the selection switch is at x10, and the pointer is between 30 & 50?

A test tool used to measure two or more electrical values, principally voltage (volts), current (amps) but it has the advantage of having a large internal resistance (ohms).

If the reading in the DMM is larger than the range, the reading (in the display screen) cannot be shown.

Clamp meter are primarily used for: (click that applies)

There is a need to multiply (by the value in selection switch) for digital ohmmeter as it is the range and the conversion factor.

It is a part of analog multi-meter that select to measure voltage (ac or dc), current or resistance.

An electrical test tool that combines a basic digital multi-meter with a current sensor.

Reason why clamp meters is a popular tool (when the jaws of a clamp meter do not need to touch a conductor during a measurement)

Reason why clamp meters is a popular tool (clamp meters are preferred for measuring high levels of current).

It is a part of analog multi-meter that have scale for different measurements.

Express 0.000 000 04s to nanoseconds.

A resistor has a value of 0.1M stamped on its case. How many ohms does it have?

Diagram that shows in simplified form, the main interrelationship of the elements in a system.

What is 0.000 007second in microseconds?

Express 0.0025 kA in milli-Amperes.

A shorthand way to draw an electric circuit, represent the pictorial components in a simplified form.

Shows the component parts of a circuit by means of single lines and appropriate graphical symbols.

Diagram that shows the detailed wiring & connections between the components or items of equipment.

A power plant has a capacity of delivering 500 000 watts. What is the capacity in MW?

Find in milli-seconds the value 0.003 seconds.

A diagram that shows the functioning of a circuit and is essential tool in troubleshooting.

Find in μ-Amperes the value of 0.000 045A.

Diagram that shows the main features of a system and its boundaries without necessarily cause to effect.

A circuit consists of a 6V battery, a switch, and a lamp. When the switch is closed, 2A flows in the circuit. What is the resistance of the lamp?

The hindrance to the flow of charge

Suppose you replace the lamp of 6V across it but drawing only 40mA. What is the resistance of the new lamp?

A voltage of 20V is measured across a 0.2kΩ resistor. What is the current flowing through the resistor?

The current that reverses direction

If the resistance of the air gap in an automotive spark plug is 2500Ω, what voltage is needed to force 200mA through it?

The current flows in one direction.

The filament of a television tube has a resistance of 90Ω. What voltage is required to produce the tube’s rated current of 300mA?

A 110V line is protected with a 25A fuse. Will the fuse “carry” a 6Ω load?

What is the resistance used by a soldering iron taking 2A at 110V?

Find the voltage used by a 10kΩ resistor drawing 0.01A.

Amount of potential energy between two points.

Find the current supplied by the generator if it delivers 20A at 220V.

An electric dryer requires 123.3Ω and draws 1.8A. Find it’s operating voltage?

The rate at which charge is flowing.

Find the operating voltage of a motor that requires 30Ω and draws 8A?

What is the resistance of the compressor if the voltage is 440V across a 2200mA?

What is the current flowing through the 800mΩ resistor with a voltage of 240V?