WorksheetsEC8553-DTSP-MODEL I-PART A
Total questions: 30
Worksheet time: 30mins
In the frequency sampling method for FIR filter design, we specify the desired frequency response Hd(ω) at a set of equally spaced frequencies.
True
False
What is the frequency response of a system with input h(n) and window length of M?
n=0∑M−1h(n)ejωn
n=0∑Mh(n)ejωn
n=0∑Mh(n)e−jωn
n=0∑M−1h(n)e−jωn
The major advantage of designing linear phase FIR filter using frequency sampling method lies in the efficient frequency sampling structure.
True
False
Which of the following is introduced in the frequency sampling realization of the FIR filter?
Poles are more in number on unit circle
Zeros are more in number on the unit circle
Poles and zeros at equally spaced points on the unit circle
None of the mentioned
The frequency sampling design method is attractive when the FIR filter is realized in the frequency domain by means of the DFT.
True
False
The effects caused due to finite word lengths are
1) Coefficient quantization error
2) Adder overflow limit cycle
3) Round off noise
4) Limit cycles
1, 2 and 3 are correct
1 and 3 are correct
1 and 4 are correct
All the four are correct
The quantization inherent in the finite precision arithmetic operations render the system linear.
True
False
In recursive systems, which of the following is caused because of the nonlinearities due to the finite-precision arithmetic operations?
Periodic oscillations in the input
Non-Periodic oscillations in the input
Non-Periodic oscillations in the output
Periodic oscillations in the output
The oscillations in the output of the recursive system are called as ‘limit cycles’.
True
False
Limit cycles in the recursive are directly attributable to which of the following?
Round-off errors in multiplication
Overflow errors in addition
Both of the mentioned
None of the mentioned
What is the range of values called as to which the amplitudes of the output during a limit cycle are confined to?
Stop band
Pass band
Live band
Dead band
Zero input limit cycles occur from non-zero initial conditions with the input x(n)=0.
True
False
Which of the following is true when the response of the single pole filter is in the limit cycle?
Actual non-linear system acts as an equivalent non-linear system
Actual non-linear system acts as an equivalent linear system
Actual linear system acts as an equivalent non-linear system
Actual linear system acts as an equivalent linear system
Which of the following expressions define the dead band for a single-pole filter?
|v(n-1)| ≥ 1+∣a∣(1/2).2−b
|v(n-1)| ≥ 1−∣a∣(1/2).2−b
|v(n-1)| ≤ 1−∣a∣(1/2).2−b
None of the mentioned
What is the necessary and sufficient condition for a second order filter that no zero-input overflow limit cycles occur?
|a1|+|a2|=1
|a1|+|a2|>1
|a1|+|a2|<1
None of the mentioned
An effective remedy for curing the problem of overflow oscillations is to modify the adder characteristic.
True
False
The limit cycle mode with zero input, which occurs as a result of rounding the multiplications, corresponds to an equivalent second order system with poles at z=±1.
True
False
Which of the following should be done in order to convert a continuous-time signal to a discrete-time signal?
Sampling
Differentiating
Integrating
None of the mentioned
The process of converting discrete-time continuous valued signal into discrete-time discrete valued (digital) signal is known as ____________
Sampling
Quantization
Coding
None of the mentioned
Which of the following is a digital-to-analog conversion process?
Staircase approximation
Linear interpolation
Quadratic interpolation
All of the mentioned
If ‘F’ is the frequency of the analog signal, then what is the minimum sampling rate required to avoid aliasing?
F
2F
3F
4F
The quality of output signal from A/D converter is measured in terms of ___________
Quantization error
Quantization to signal noise ratio
Signal to quantization noise ratio
Conversion constant
Which bit coder is required to code a signal with 16 levels?
8 bit
4 bit
2 bit
1 bit
The interface between an analog signal and a digital processor is
D/A converter
A/D converter
Modulator
Demodulator
The speech signal is obtained after
Analog to digital conversion
Digital to analog conversion
Modulation
Quantization
As compared to the analog systems, the digital processing of signals allow
1) Programmable operations
2) Flexibility in the system design
3) Cheaper systems
4) More reliability
1, 2 and 3 are correct
1 and 2 are correct
1, 2 and 4 are correct
All the four are correct
Which units are generally involved in Multiply and Accumulate (MAC)?
Adder
Multiplier
Accumulator
All of the above
In DSP processors, which among the following maintains the track of addresses of input data as well as the coefficients stored in data and program memories?
Data Address Generators (DAGs)
Program sequences
Barrel Shifter
MAC
In DSP Processor, what kind of queuing is undertaken/executed through instruction register and instruction cache?
Implicate
Explicate
Both a and b
None of the above
