What is the first step in "How to Safely Unload Heavy Equipment"?

What is the last step in "How to Safely Unload Heavy Equipment"?

True or False:

The overall size of the equipment should be considered before unloading the heavy equipment:

True or False

The weight of the equipment is not a factor to be considered before unloading the heavy equipment.

The following points should be considered before unloading the heavy equipment:

__________ of heavy equipment should be done immediately after it is unloaded

A Comprehensive Inspection & Test Plans for Electrical Work might include the EQCP. What does EQCP means?

A Comprehensive Inspection & Test Plans for Electrical Work might include the Electrical ITP. What does ITP means?

The equipment should be stored properly under these condition except for

True or False

Chemical, batteries, gas cylinder, explosives can be kept in the same room where electrical equipment is stored.

Storage-The floor should not be subject to vibrations, however if it can’t be avoided, machine should be placed on __________________.

The foundation plan is usually recommended by the manufacturer. The foundation should be made of?

________ are required for machines, machine tools and heavy equipments which have wide range of speeds, loads and operating conditions. These are designed considering the shocks and vibrations (dynamic forces) resulting from operation of machines.

The following are the different types of foundations generally used for machines and equipment. Check all the possible answers

_________ is a method or procedure by which shafts of machines such as motors and turbines are connected to a generator or pump.

True or False

Aligning your machine does not affect the longevity & product quality.

_______ is a device used for lifting or lowering a load by means of a drum or lift-wheel around which rope or chain wraps. See photo.

______ is a powered industrial truck with hydraulic lift system and forks to pick up and transport materials.

Identify the tool shown.

Identify the screwdriver shown.

Identify the electrical tool shown.

True or False

An electrical transformer should be inspected for damage before installation.

True or False

Safety precautions and safety equipment for the construction worker handling the transformer is optional.

If the electrical transformer is installed at ground level, it is important to evaluate

If the electrical transformer is to be installed over a concrete pad, it must have at least

If your electrical transformer is to be installed_______________, careful provisions and structural analysis of the load must be analyzed and considered for the integrity of the structural design.

The following points should be checked while installing switchgear. Check all applicable choices.

The following points should be included in installation of induction motor. Check all the applicable options.

True or False

Testing and commissioning is done after the installation has been completed.