Electrical power propagates along transmission lines in the form of TEM waves.

Transmission line analysis is used when?

In general, a line is considered as a transmission line if its length exceeds how many wavelength?

Reflection of signal on the line must be avoided.

Which is not an Application of Transmission Lines?

Exact value of speed of light?

One example of unbalanced line?

Which is not a balanced line?

It is characterized by high radiation losses and is susceptible to noise.

Commonly used insulators are Teflon and Polyethylene.

It is not suitbale for high frequencies because of high loss due to insulation

It provides performance to allow data at 100 Mbps and slightly more

It protects the twisted pairs of wires inside the Ethernet cable, helps prevent crosstalk and noise interference.

It can reach up to 100Gbps at a range of 15 meters making it one of the most capable categories of Ethernet cables.

This standard promises a maximum frequency of 2,000MHz and speeds of up to 40Gbps at 30 meters.

This has a maximum bandwidth of 250MHz.

It consists of parallel conductors separated and surrounded by a solid dielectric.

Rigid air filled coaxial has ability to minimize the radiation losses.

Rigid-air filled is less expensive, easier to construct and install.