Which method of steel processing helps to release internal stresses by heating the steel slowly and allowing it to air cool?

These typically support ceilings and floors.

What is the term for a mixture of metals or a mixture of a metal and nonmetal?

Which choice most is most appropriate for a structural horizontal block, found commonly in masonry construction, that spans between openings?

Materials account for approximately _____% of the construction cost.

Consists of reconstituted lumber in the form of rectangular sections.

Primary reference for wood. This is the basic authority for structural wood and wood construction.

If made of wood, arches and domes are typically made from glulams, because they can easily be bent during manufacturing.

A series thin, laminations of wood that are glued together. Can be bent or arched and span over 200 ft.

Standard concrete test for workability.

Type of portland cement that is used for standard, typical construction.

Probable loads on a building due to occupancy and use.

United Hospital Center would be classified as what Risk Category per the IBC?

All of the following affect the ultimate strength of concrete, except:

Type of portland cement used in precast plants where forms need stripped quickly for reuse.

Increases a concrete mix's resistance to freeze thaw.

Live load reductions are not permitted in parking garages.

Examples include wind, snow, and rain.

When a load is applied for a long period of time and eventually the deflection becomes too great and the member fails.

Generally account for the weight of the occupants, furniture, some moveable equipment, etc.

What is the ground snow load for most of Georgia?

This is also known as mill construction or slow-burning construction.

Provides accurate strength of the concrete and takes the field curing techniques in to account.

A typical water to cement (w/c) ratio for concrete is 0.3.

Example of a lateral load.

Wall studs are typically 2x4 or 2x6 wooden members spaced at 24 inches on center.