wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

CH7 Body Shop Materials and Fastener Tech

Total questions: 30

Worksheet time: 15mins

Name
Class
Date
1.

The visible topcoat on a vehicle

a)

Paint

b)

Primer

c)

Sealer

2.

This coat improves adhesion of the topcoat to bare metal or plastic

a)

Primer

b)

Sealer

c)

Clear coat

3.

Lacquer , Enamel (Urethane), and waterbase are all types of _______.

a)

Paint

b)

Primer

c)

Sealers

4.

This type of paint uses water to carry the pigment. It dries through evaporation.

a)

Enamel

b)

Waterbase

c)

Lacquer

5.

This type of paint has the clear coat and the color coat mixed together.

a)

Two Stage

b)

Single Stage

c)

Tri Stage

6.

This type of paint has two distinct layers of paint: base coat and clearcoat.

a)

Single Stage

b)

Two-Stage

c)

Tri-Stage

7.

This type of primer has an acid in it to treat bare metal so the primer will adhere properly.

a)

Self Etching primer

b)

UV primer

c)

Primer surfacer

8.

This type of primer cures fast with the use of UltraViolet light.

a)

Self Etching primer

b)

UV Primer

c)

Epoxy primer

9.

This paint coat is between the primer or old paint, and the top coat. It is designed to prevent the old finishes bleeding through.

a)

Self Etching primer

b)

Sealer

c)

Surfacer

10.

A _________ is used to fill or level a damaged area.

a)

Body-Filler

b)

Primer

c)

Morter

11.

A ______ ________ can be used to remove dust and lint from the surface right before painting.

a)

Sticky tape

b)

Old cloth

c)

Tack Cloth

12.

______ ______ is a special paper designed to be used to cover body parts that are not to be painted. It comes on a roll and is used with tape.

a)

Masking paper

b)

Flash paper

c)

Blank paper

13.

This type of masking paper is nonporous paper designed for masking off paint spray.

a)

Primer masking paper

b)

Paint masking paper

14.

This type of masking paper is less expensive, and more porous. It feels like a brown paper bag.

a)

Paint masking paper

b)

Primer masking paper

c)

Masking plastic

15.

This masking material can be used to cover large body areas or whole cars more easily than paper.

a)

Primer masking paper

b)

Paint masking paper

c)

Masking plastic

16.

This is a THICK tape with a plastic body that is used to protect parts from damage when sanding.

a)

Masking tape

b)

Duct tape

c)

Fine line tape

17.

This tape is used to hold masking paper to the vehicle

a)

Fine line tape

b)

Masking tape

c)

Clear tape

18.

This type of tape is very thin and used to produce a sharper, cleaner tape line

a)

Fine line

b)

Masking

c)

Duct

19.

The ______ numbering system denotes how coarse or fine the abrasive is.

a)

Sand

b)

Grit

c)

Dirt

20.

The higher the grit number the ____________ the sandpaper feels

a)

Rougher

b)

Smoother

21.

_________ _________ are used to make a leakproof joint between body panels.

a)

Seam sealers

b)

Bathtub caulk

c)

Silicone

22.

A _________ is a metal shaft with a head on one end and threads on the other.

a)

Nut

b)

Bolt

c)

Push clip

23.

The bolt-_______ is the top and used to torque or tighten the bolt

a)

Thread

b)

Head

c)

Pitch

24.

The ____ _____ is the measurement of thread coarseness.

a)

Thread pitch

b)

Bolt head

c)

Bolt diameter

25.

A bolt with 3 head hash marks would be a grade____ bolt.

a)

3

b)

4

c)

5

26.

These are used to protect the panel and paint from being scratched by the bolt being tightened.

a)

Nut

b)

Bolt

c)

Washer

27.

A tool with a forked or U shaped end is used to remove ____ ______.

a)

Push clips

b)

Bolts

c)

Screws

28.

These plastic clips can be expensive and are used to hold various parts onto the vehicle

a)

Snap rings

b)

Push clips

c)

Cotter pins

29.

This type of retainer is used to hold radiator hoses, heater hoses, and other hoses onto their fittings.

a)

Zip tie

b)

Hose screw

c)

Hose Clamp

30.

If a push clip, bolt, nut, or other type of fastener is damaged you should_____________

a)

Just put it back in and hope for the best.

b)

Leave it out and hope no one notices.

c)

Replace it with a new undamaged fastener.