NEW
Font size
WorksheetsAUT108 Week 3 Quiz Gasoline Fuel Systems
Total questions: 25
Worksheet time: 13mins
Atmospheric pressure is _____ psi at sea level.
Select one:
14.5
14.6
14.7
14.8
Tech A says that high octane fuel is harder to ignite than lower octane. Tech B says that using high octane fuel in an engine designed for lower octane will produce better fuel economy and power. Who is correct?
Select one:
Tech A
Tech B
Both A and B
Neither A nor B
The most important job of the fuel system is to optimize engine performance while:
Select one:
keeping fuel consumption and emissions to a minimum.
keeping car owners happy with acceptable vehicle performance.
making sure all DMV rules are adhered to.
making sure the highest miles-per-gallon are achieved.
Which of these fuel characteristics helps to prevent the air fuel mixture from spontaneously igniting in the combustion chamber?
Select one:
The ignition temperature
The cetane rating
The octane rating
The antiknock rating
The sock typically consists of a ______, which prevents most small particles from being drawn into the fuel pump and sent through the rest of the fuel system.
Select one:
Paper filter
Fine mesh
Plastic screen
Aluminum alloy screen
The ______ is a pipe that extends above the fuel tank.
Select one:
Fuel injector
Fuel rail
Fuel line
Fuel filler neck
A return line is always provided to allow excess fuel to return to the tank.
Select one:
True
False
The ________ design uses a one-way valve to hold pressure in the system while the pressure tester is connected and disconnected to the fuel rail.
Select one:
O-ring valve
Quick-connect valve
Schrader valve
Fuel pressure tester valve
The vacuum created in a mechanically sound gasoline engine at sea level is between _______ of mercury.
Select one:
15" and 18"
16" and 18"
18" and 21"
19" and 23"
A throttle ______ controls air flow through the venturi and is linked to the throttle ______.
Select one:
Valve; pedal
Pedal; valve
Piston; pedal
Valve; piston
What is the purpose of the venturi?
Select one:
To make the air speed up as it passes through
To ensure the proper air fuel mixture is available
To provide extra fuel for accelerating
To make sure an adequate supply of fuel is available
The carburetor does all of the following EXCEPT:
Select one:
control the delivery of the mixture to the intake system.
atomize the fuel.
mix the fuel with air.
compress the fuel for delivery.
A fuel pump can be tested using a lab scope and a low-amp clamp to:
Select one:
graph the current flow.
measure the fuel pressure.
measure the volume.
test for pressure loss due to leaks.
Tech A says that most electric fuel pumps are now mounted inside of the fuel tank. Tech B says that fuel flows through the center of the electric pump and is used to cool the pump. Who is correct?
Select one:
Tech A
Tech B
Both A and B
Neither A nor B
Tech A says that fuel can be tested for alcohol content by adding water to the fuel in a test tube. Tech B says that fuel can be tested for water content by adding alcohol to the fuel in a test tube. Who is correct?
Select one:
Tech A
Tech B
Both Techs A and B
Neither Tech A nor B
After replacing an external fuel filter, check it for leaks by:
Select one:
cranking the engine for 5 seconds.
cycling the ignition key on and off several times.
starting the vehicle and watching for drops of fuel.
wiggling the connections and watching for moisture.
The purpose of a(n) ______ is to provide the ideal air/fuel mixture for the operating conditions of the engine.
Select one:
Air intake system
Fuel system
Exhaust system
Cooling system
Tech A says that the more oxygen the engine uses means the engine is running a rich mixture. Tech B says that the less oxygen the engine uses means the engine is running a lean mixture. Who is correct?
Select one:
Tech A
Tech B
Both Techs A and B
Neither Tech A nor B
Which of these terms is used to describe when fuel vaporizes in the fuel pump and the flow of fuel to the engine is blocked?
Select one:
Fuel lock
Pump block
Vapor block
Vapor lock
Types of fuel line connections include all of these EXCEPT:
Select one:
banjo bolt fittings.
quick couplings.
flare fittings.
compression fittings.
Because fuel _______ as temperature _______, fuel tanks are vented to let them breathe.
Select one:
Expands; rises
Contracts; falls
Expands; falls
Both A and B
________ employ electronically controlled injectors to spray the fuel into either the intake manifold or the directly into the cylinder.
Select one:
Carbureted systems
EFI systems
Fuel rails
Metering jets
What is this part?
Electronic Fuel Pump
Mechanical Fuel Pump
Fuel Injector
Carburetor
Fuel Injector
Ignition Coil
Fuel Pressure Regulator
Electric Fuel Pump
This parts has a specific air gap?
True
False
