NEW
Font size
WorksheetsCAD 2nd Semester - SW
Total questions: 35
Worksheet time: 19mins
Using the design library, you can access _________________, which provides you with a wide variety of standardized parts.
Toolbox
Hole Wizard
ISO
Insert Components
What is the depth of this top bracket for the magnetic block?
75mm
260mm
20mm
25mm
What is the fillet radius of this top bracket for the magnetic block?
75mm
260mm
20mm
25mm
What is the diameter of the hole in this top bracket for the magnetic block?
75mm
260mm
20mm
24mm
The Candlestick CAD Tutorial uses the ______________ feature in the Command Manager to create base flanges, edge flanges, and sketched bends.
Toolbox
Sheet Metal
Weldments
Mold Tools
Centerlines are _____________ lines which can help you with the design of a part.
Construction
Dimension
Object
Solid
What is the diameter of the holes in the picture holder?
10mm
5mm
1.5mm
16mm
The chamfer of the top of the base of the picture holder is set at how many degrees?
90
45
3
150
Chamfering the bottom of the holes makes them ______________ holes.
drilled
counter bored
exfoliated
When assembling your picture holder, in CAD tutorial 2, you used ____________ mates.
Concentric
Coincident
Parallel
Perpendicular
What is the height (depth/thickness) of the of the Tic Tac Toe base?
60mm
46mm
10mm
8mm
What feature in the Command Manager do you select in order to create the hole pattern?
Circular Pattern
Hole Pattern
Hole Wizard
Linear Pattern
To set the diagonal direction of the holes, what must you select?
Set distance to 15mm
Select the diagonal line you created
Circular Pattern
3 Copies
What is the diameter of each of the 9 holes?
30mm
10mm
8mm
46mm
What type of holes do you create in the corners, using Hole Wizard?
Counter Bore
Counter Sink
Tapered Tap
Slot
In order to duplicate Cut-Extrude2/3 on all three legs of the bridge (Bearing Puller, CAD Tutorial 8), what feature must be selected?
Extruded Cut
Circular Pattern
Revolved Cut
Mirror
During the Assembly for CAD Tutorial 8, Bearing Puller, what is the first mate you must select to align the bolt shaft with the center hole of bridge?
Coincident
Parallel
Perpendicular
Concentric
When assembling the Lamp Stand from CAD Tutorial 7, what planes must you mate parts to in order to align them over each other?
Top and Front
Front and Right
Right and Top
A BOSS on a 3D Part is:
The person who pays you
Any feature connected to the main body of the 3D part
A boss must be a rectangular part
A boss must be a circular part
A BASE on a 3D Part is:
A feature extruded off of the main section of a 3D part
Must be square shaped
A hole cut thru an object
The main body of a 3D part or the first thing extruded
To create one or more curves in a sketch by projecting an edge, loop, face, curve, or external sketch contour, set of edges, or set of sketch curves onto the sketch plane.
Convert Entity
Trim Entity
Expand Entity
Mirror Entity
Circles with the same centerpoint are _______________.
Concentric
Tangent
Cotangent
Excentric
Operation features that require a selected edge or face include:
Chamfer, Extruded Boss, Extruded Cut
Fillet, Hole, Shell
Fillet, Chamfer, Shell
Fillet, Extruded Cut, Hole
Three documents that make up a SolidWorks model:
parts, drawings, features
drawings, features, tree
parts, assemblies, drawings
assemblies, drawings, features
A flat 2D surface is called a:
face
base
plane
profile
Relationships that align and fit components together in an assembly.
mates
parts
components
features
These are parts of sub-assemblies contained in an assembly.
features
operations
components
shapes
axis
A straight line that can be used to create model geometry, features, or patterns. Can be made in a number of different ways, including using the intersection of two planes
Repeats selected sketch entities, features, or components in an array, which can be linear, circular, or sketch-driven
When there are not enough dimensions and relations to prevent entities from moving or changing size
chamfer
An internal rounding of a corner or edge in a sketch, or an edge on a surface or solid
The 3D solid geometry in a part or assembly document
Bevels a selected edge or vertex
fillet
An internal rounding of a corner or edge in a sketch, or an edge on a surface or solid
The 3D solid geometry in a part or assembly document
Bevels a selected edge or vertex
mate
A document in which parts, features, and other pieces are mated together
A geometric relationship, such as coincident, perpendicular, tangent, and so on, between parts in an assembly
An individual shape that, combined with other features, makes up a part or assembly
origin
The point of intersection of the three default reference planes.
A singular location in a sketch, or a projection into a sketch at a single location of an external entity
A single 3D object made up of features
plane
Flat construction geometry; can be used for a 2D sketch, section view of a model, and others.
A feature that creates the base of a part, or adds material to a part, by extruding, revolving, sweeping, or lofting a sketch, or by thickening a surface
A feature tool that hollows out a part
In SolidWorks, to select multiple lines use...
Ctrl
Shift
Alt
Tab
