wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Autodesk Inventor Certification Review

Total questions: 37

Worksheet time: 26mins

Name
Class
Date
1.
Which of the four Inventor Base environments and file extension names is .idw?
a)
Part
b)
Assembly
c)
Drawing
d)
Presentation
2.
What is the feature of the user interaction does this image portray?
a)
Browser
b)
Graphics Window
c)
Quick Access Tool Bar
d)
Ribbon
3.
What does the label #1 represent
a)
Feature
b)
Sketch
c)
Part
d)
Constraint
4.
What does the label #3 represent
a)
Constraint 
b)
Sketch
c)
Part
d)
Constraint
5.
What does the label #1 represent
a)
Feature
b)
Sketch
c)
Part
d)
Constraint
6.
What does the label #1 represent
a)
Home View
b)
ViewCube
c)
Navigation Bar
7.
What does the label #2 represent
a)
Navigation Bar
b)
Home View
c)
ViewCube
8.
What does the label #3 represent
a)
Navigation Bar
b)
Home View
c)
ViewCube
9.
Which of the four Inventor Base environments and file extension names is .ipt?
a)
Part
b)
Assembly
c)
Doc
d)
Drawing
10.

Which file type is used to create a new part?

a)

Standard.iam

b)

Standard.idw

c)

Standard.ipn

d)

Standard.ipt

11.

Which of the four Inventor Base environments and file extension names is .iam?

a)

Part

b)

Assembly

c)

Drawing

d)

Presentation

12.

What is the definition of a "constraint" in inventor?

a)

Restrictions and associations that are applied to 2D geometry (shapes, points, lines) to make them line up or connect in a certain way

b)

The limits and restrictions a designer must consider at the beginning of a project

c)

Devices that keep a person from moving

d)

Specifications for the size of a design, 2D or 3D

13.
The constraint that forces two selected lines or curves to lie at right angles to one another is ___________.
a)
parallel
b)
vertical
c)
perpendicular
d)
coincident
14.
To create a solid model by giving depth to a 2D profile, use the __________ command.
a)
thicken
b)
offset
c)
extrude
d)
protrude
15.

To switch to the isometric/home view of a model quickly, press the __________ key on the keyboard.

a)

F6

b)

F7

c)

F8

d)

F9

16.
To cancel a command, press the ____________.
a)
ENTER key
b)
F6 key
c)
DEL key
d)
ESC key
17.
Which navigation tool allows for lateral movement (left, right, up, or down) within the graphics window?
a)
zoom
b)
pan
c)
scale
d)
rotate
18.
When the cursor moves over an endpoint or midpoint of an object, Inventor® informs you by displaying a _________.
a)
blue X
b)
green dot
c)
red rectangle
d)
blue square
19.

Which of the following are 2D commands

a)

Line

b)

Extrude

c)

Hole

d)

Circle

e)

Slot

20.

Which constraint symbol matches coincident: occurring together in space or time. For example, the ends of the lines were coincident - they were on top of each other.

a)
b)
c)
d)
e)
21.

Which symbol matches the constraint that will make two lines co-linear (line up with each other)?

a)
b)
c)
d)
e)
22.

Which constraint will force points to line up horizontally (side by side) and/or make lines parallel to the x-axis (horizontal axis)?

a)
b)
c)
d)
e)
23.

Which constraint will make lines parallel? In math terms, it makes them have the same slope.

a)
b)
c)
d)
e)
24.

Which constraint will make lines perpendicular, so they form a right angle with 90 degrees?

a)
b)
c)
d)
e)
25.
Which New File is used to create a new part?
a)
Standard.iam
b)
Standard.idw
c)
Standard.ipn
d)
Standard.ipt
26.
Which New File is used to create a new assembly?
a)
Standard.iam
b)
Standard.idw
c)
Standard.ipn
d)
Standard.ipt
27.
Which New File is used to create a new drawing?
a)
Standard.iam
b)
Standard.idw
c)
Standard.ipn
d)
Standard.ipt
28.
TRUE OR FALSE
The Concentric constraint forces two circles, arcs, or ellipses to share a common center point.
a)
True
b)
False
29.
TRUE OR FALSE
When you sketch, constraints are not applied to the sketch by default.
a)
True
b)
False
30.
TRUE OR FALSE
After a sketch is fully constrained, you cannot change a dimension’s value.
a)
True
b)
False
31.

TRUE OR FALSE

You can draw an arc while the Line command is still active.

a)

True

b)

False

32.
Limits or restrictions that are placed on geometry to define a model’s shape and size are ____________.
a)
geometric entities
b)
constraints
c)
sketch planes
d)
regions
33.
When a command dialog box is open, what does a red arrow indicate?
a)
input needed
b)
error
c)
missing dimension
d)
unconstrained geometry
34.
What must you do first before you can create a 3D object?
a)
create 2D sketch
b)
click extrude
c)
type in measurement
d)
none of the above
35.
The purpose of the middle mouse button or wheel is to ___________.
a)
bring up additional options.
b)
select points, navigation menus, and enter commands.
c)
change the drawing magnification and move around the drawing.
d)
serve as an alternative to the ENTER key.
36.

What type of file lets you create exploded views?

a)

Part

b)

Drawing

c)

Assembly

d)

Presentation

37.

What is the "feature" when creating a pattern?

a)

The axis you want to pattern around

b)

The part of the object to be patterned

c)

The outer edge of the object

d)

A round part of the object

Similar Resources on Wayground

The Rock Cycle Review

35 questions

The Rock Cycle Review

quiz

Worksheet

•

6th Grade - University

Job Interview Quiz

34 questions

Job Interview Quiz

quiz

Worksheet

•

9th - 12th Grade

College & Career Ready

34 questions

College & Career Ready

quiz

Worksheet

•

9th - 12th Grade

Chapter 6 Test

42 questions

Chapter 6 Test

quiz

Worksheet

•

9th - 12th Grade

9th Eng OTR 3

40 questions

9th Eng OTR 3

quiz

Worksheet

•

9th Grade

IONS

42 questions

IONS

quiz

Worksheet

•

9th - 12th Grade

AS2 5.02

39 questions

AS2 5.02

quiz

Worksheet

•

9th - 12th Grade

Economics: Chapters 4 & 5 Review

40 questions

Economics: Chapters 4 & 5 Review

quiz

Worksheet

•

KG - University