Font size
WorksheetsSpring Final Quick Review
Total questions: 25
Worksheet time: 13mins
The overall width of a part is dimensioned as 3.00 ± 0.02. What is the upper limit?
3.00
0.02
3.02
0.04
Which type of tolerance is used for the diameter of this part?
Limit dimensions
Bilateral tolerance
Unilateral tolerance
General tolerance
Which type of tolerance is used for the diameter of this hole?
Limit dimensions
Bilateral tolerance
Unilateral tolerance
General tolerance
Which of these choices is NOT a step in reverse engineering?
Visual analysis
Production analysis
Structural analysis
Functional analysis
Which of these is NOT a component in a Black Box Model?
Inputs
Outputs
Materials list
Basic function
Energy transformation
Which statement does NOT apply to economy in visual design?
Inexpensive
Simple
Minimal
Less is more
Which reason for reverse engineering relates to finding out new information due to curiosity, espionage, etc.?
Documentation
Discovery
Investigation
Improvement
What outcome would you NOT expect if you reverse engineered a product to improve it?
It might be less safe for the user
It might cost less
It might be faster to manufacture
It might have improved features for the consumer
What type of section view is this?
Full section
Offset Section
Half Section
Quarter Section
What type of section view is this?
Offset Section
Half section
Zig Zag Section
Full section
Which 3 views are shown on a standard multiview drawing?
Top view
Front view
Rear view
Right side view
Bottom view
What is wrong with these dimensions?
It has dimensions to hidden lines
It is missing necessary dimensions
It is duplicated dimensions
Many dimensions are not between adjacent views
What is wrong with these dimensions?
It has dimensions to hidden lines
It uses chain dimensioning.
It has duplicated dimensions.
Many dimensions are not between adjacent views.
What does this symbol mean in a hole note?
Radius
Diameter
Depth
Through
True or False: These leader lines are properly drawn.
True
False
The following is a hole note or callout for what type of hole?
Blind
Counterbore
Tapped
Countersink
What does this symbol mean in a hole note?
Countersink
Counterbore
Blind or depth
Diameter
In the thread note 3/8-16 UNC -2A, the number 16 represents the
Pitch in threads per inch
Pitch in mm between threads
Diameter in inches
Diameter in mm
In the thread note 1/4-28 UNF -2A, the fraction 1/4 represents the
Diameter in mm
Diameter in inches
Pitch in threads per inch
Pitch in mm
Which fasteners are threaded?
Bolt
Washer
Nut
Nail
Screw
A brick sinks in water while a wooden block of the same volume floats. This is true because the brick has __________.
lower density
lower mass
higher volume
higher density
Ergonomic design takes ____________ data into account.
economic
environmental
human
thermal
Which answer choice best describes product life cycle?
The time it takes to sell a product in the store.
The process of turning raw material into a product.
The steps from material to manufacturing to sale to use to disposal.
The recycling process for a product.
Which type of fit results in a gap between assembled parts?
Interference
Tolerance
Allowance
Clearance
Will answering these questions COMPLETELY prepare you for the final exam?
Probably?
Not necessarily ... I should still study the Test Review and Hub resources.
I'm supposed to study??
