Tech A says that dealership technicians generally have access to manufacturers training to help prepare them as technicians. Tech B says that an independent shop works on a wide variety of equipment that requires a broad skill level in technicians. Who is correct?

Tech A says that the purpose of the battery is to charge the vehicle. Tech b says that in-line engines are generally easier to work on than V engines. Who is correct?

Tech A says that the gear ratio in a transmission helps the vehicle gain speed. Tech B says that the gear ratio in the final drive can be selected with a gearshift lever. Who is correct?

Tech A says that both caution and danger indicate a potentially hazardous situation. Tech B says that an exhaust extraction hose is not needed if the vehicle is only going to run for a few minutes. Who is correct?

Tech A says that firefighting equipment includes safety glasses. Tech B says that a class A fire extinguisher can be used to fight an electrical fire only. Who is correct?

Tech A says that material data sheets contain information on procedures to repair a vehicle. Tech B says that you only need an MSDS if your safety may be in danger. Who is correct?

Tech A says that barrier creams are used to make cleaning your hands easier. Tech B says that hearing protection only needs to be worn by people operating loud equipment. Who is correct?

Tech A says that tinted safety glasses can be worn when working outside. Tech B says that welding can cause sunburn. Who is correct?

Tech A says that a repair order is just a piece of paper telling the technician what to do. Tech B says that the repair order is a legal and binding contract between the customer and the repair facility. Who is correct?

Tech A says that the owner"s manual will have the oil pan drain plug torque information. Tech B says that oil pan capacity information for that specific vehicle will be in the owner's manual. Who is correct?

Tech A says that knowing how to use tools correctly creates a safe working environment. Tech B says that a flare nut wrench is used to loosen different types of lines. Who is correct?

Tech A says that a dead blow hammer reduces rebound of the hammer. Tech B says that a dead blow hammer should be used to cut the head of a bolt off with a chisel. Who is correct?

Tech A says that it is good practice to perform a walk around inspection of the vehicle with the customer. Tech B says that fender covers will protect from dents when working on the engine. Who is correct?

Tech A says that when jump-starting a vehicle, a spark typically occurs when making the last jumper cable connection. Tech b says that all four of the jumper cable connections should be made at the battery terminals. Who is correct?

Tech A says that knowing how to use tools correctly creates a safe working environment. Tech B says that a flare nut wrench is used to loosen very tight bolts and nuts. Who is correct?

Tech A says that a vehicle jack can be used to support the vehicle while working under it. Tech B says that a jack stand automatically adjusts to the vehicle hieght. Who is correct?

Tech A says that the 3 c's are the customer, complaint, and concern. Tech B says that the 3 c's are concern,cause and correction. Who is correct?

How many letters and numbers are in a vin number?

How many certifications are available in Automotive?

What agency should be notified of any environmental hazars?

Select the tool that is used to measure clearance.

Grade 8 bolts are used for :

Grade five bolts have ____ identifying lines on the head.

Which of the following is not a type of socket?