Worksheets1A - TLE 111
Total questions: 21
Worksheet time: 27mins
Which of the following is the hardest grade of drawing pencil?
9H
7H
HB
5B
When a designer or an ordinary person translates his or her design idea with the use only of paper and pencil, what is the name of the activity?
Geometric construction
Freehand sketching
Drafting
Architectural delineation
Which of these are positioned to limit letter g aside from the waist line?
base line
waist line
drop line
cape line
Which of the following should be done in planning a carpentry project?
Lay out the project. Using 2” masking tape on the floor to indicate the boundaries of the project. An actual-size layout will help you visualize the end result and can often draw your attention to issue that aren’t obvious from a scale drawing
Examine the areas before cutting into a wall to determine the location of water lines, ductwork, and gas pipes. In most cases, pipes, utility lines, and ductwork run through the wall vertically between floors.
Draw cutting diagrams to help you make efficient use of materials. Make scale drawings of sheet goods on graph paper, and sketch
Make a list material, using your plan drawings and cutting diagrams as a guide. Photocopy the materials list, and use it to organize your work and estimate costs
The term Level refers to the _______.
none of the following
horizontal plane
both vertical and horizontal
vertical plane
Which of the following formulas is used to calculate board feet?
T ´ W ÷ L
aa + bb + cc
(T ´ W ´ L) ÷ 12
L ´ W
Which of the following is the greatest commercial importance of woods?
engineered wood production.
furniture, cabinetmaking, and building construction.
production of synthetics and plastics
making paperboard and cardboard.
Architectural drawings are not drawn full size. What is used to allow the building views to be drawn on smaller paper?
Smaller paper
Measuring tape
Ruler
Scale
Which of the following measurement should we consider before purchasing wood?
price
Thickness
thickness
width
Which of the following drafting pencil is used when working on extremely accurate especially working on graphs, diagrams, and chart?
Mechanical pencil
Medium pencils
Hard pencils
Soft pencils
Michael, wants to attach paper to the drafting board, What should Michael do?
Place the board first in the stable area to minimize the damage of the paper.
Place the drafting paper on the board starting from the upper side of the board down to bottom of the board. Apply a glue for easy removing.
Place the paper close to the right edge, and use masking tape to tighten the paper.
Place the sheet close to the left edge of the drafting board. Working in this area makes the T square easier to handle and reduces the likelihood of error because of T square “swing.”
Also known as 3-view drawing, which method represents the exact shape and size of an object drawn to scale on ‘set of planes’?
Fourth dimension
Perspective drawing
Isometric drawing
Orthographic drawing
Which of the following should be done in planning a carpentry project?
I. Make a list material, using your plan drawings and cutting diagrams as a guide. Photocopy the materials list, and use it to organize your work and estimate costs.
II. Draw cutting diagrams to help you make efficient use of materials. Make scale drawings of sheet goods on graph paper, and sketch
III. Examine the areas before cutting into a wall to determine the location of water lines, ductwork, and gas pipes. In most cases, pipes, utility lines, and ductwork run through the wall vertically between floors.
IV. Lay out the project. Using 2” masking tape on the floor to indicate the boundaries of the project. An actual-size layout will help you visualize the end result and can often draw your attention to issue that aren’t obvious from a scale drawing
II and IV
I and III
III and IV
I and II
How will you categorize the lumber’s moist, when its moist content is less than 19 percent?
S-SOFT
S-HARD
S-DRY
AS-GRN
How will you categorize the lumber’s moist, when its moist content is 19 percent or more?
S-SOFT
S-HARD
S-DRY
S-GRN
TRUE OR FALSE: Analyze each statement and click the option of your choice.
In the Principles of measurement, the “Half” of something is the exact middle between two points. So, anytime a measurement was divided into two equal parts, the term half was used for each of them.
False
TRUE
TRUE OR FALSE: Analyze each statement and click the option of your choice.
In drafting, erase carefully so you don’t tear the drawing. A light back-and-forth motion works best, and use the hard abrasive to make your project neat and clean.
FALSE
F
TRUE OR FALSE: Analyze each statement and click the option of your choice.
A hacksaw has a flexible, fine-tooth blade designed to cut metal; plumbers pipe or stubborn metal fastener.
FALSE
TRUE
Which of the following is NOT recommended for sanding?
Always sand against the grain
Never use a coarser grit than necessary.
Sand end grain in only one direction.
Take care to prevent round corners
WRITE YOUR NAME, COURSE, YEAR AND SECTION
EX. Juan Pedro, BTLED 1-K
which of the following is the ideal working area of a draftsman?
60 sq. ft
70 sq.ft
80sq.ft
90 sq.ft.
