WorksheetsBricklaying and Concreting Class test
Total questions: 25
Worksheet time: 49mins
Why requires measure a mortar mix?
Consistency in the mix
Reduce debris
Save money
Increase producitivity
There are different types of tiling tools. Which one of the following figures is a tiling tool?
The following below describe the reason why we apply tiling. Which of the following below is NOT the reason to do tiling?
Easy to maintain
Easy to clean
Water resistant
Give weight to the ground
Spacer is use to prevent the tiles from expansion. Which of the following is spacer?
There are different types of aggregates. Which of the following below categories of sand?
Coarse aggregates
Fine aggregates
Hard aggregates
Small sand aggregates
Which of the following tools below can assist you are the fastest way to mark straight guidelines on flat surfaces?
Steel tape
Chalk line
Chain tape
Ranging tape
Which of the following is NOT an example of an aggregate?
Sand
Pebbles
Rocks
Cement
What is the name of the brick bonding shown in figure 9.0 below?
Flemish bond
Stretcher bond
English bond
Header bond
Below are the properties of a Stretcher bond, which one is NOT?
Cavity walls
Single brick wall
Half brick wide
Also known as a Dutch bond
Garden wall bond consists of two types of bonds. State the missing bond in figure 11.0
Flemish garden wall bond
Monk wall bond
Stack wall bond
English cross wall bond
What is the name of the brick bonding shown in figure 12.0 below?
Flemish bond
Stretcher bond
English bond
Header bond
To help the “workability” of mortar a bricklayer will add to the mortar mix;
Lime
Retardant
Accelerant
Admixture
Which of the following is NOT the suitable feature of material designed for plaster?
Durable
Smooth
Flat
Hard
What is the tool you use to rub up the render to an even and smooth texture?
A trowel
A jointer
A float
A hammer
________is the finishing off the joints
Jointing
Binding
Plastering
Concreting
When a wall has been built and/or before the mortar hardens the bricklayer needs to ______.
carry out jointing & or pointing.
carry out the housekeeping.
paint the brick wall.
carry out the brick cutting.
Which of the following pointing matches the figures below?
1. Hollow key 2.Flush finish
1. Hollow key 2. Bang finish
1. Circular key 2. Flat finish
1. Circular key 2. Flush finish
Bonding is _______________a definite pattern in the wall.
arrangement of brick
arrangement of tools
the mixing of cement
painting of wall
Fine and coarse aggregates are used in concrete mixtures. What are the other mixtures for concrete?
Paint
Oil
Timber
Water
Fine and coarse aggregates are used in concrete mixtures. What are the other mixtures for concrete?
Straight edge and line
Gauge rod and pin
Line and pin
Measuring tape and line
This tool is used to finish a concrete surface by making it smooth. It is used after the surface has been made . Which of the following tools describe earlier?
Straight edge
Pointing trowel
Wooden float
Hammer
.Figure 16.0 below shows a spirit level is used to level the bricklaying. . Which of the following tools is used to assist the spirit level describe below?
Straight edge
Measuring tape
Corner block
Steel Square
Cement and water are the materials for concrete. What are the other materials for concrete?
Fine aggregates and coarse aggregates
Sand and oil
Cement and paint
Water, admixture and oil.
Which of the following below describe tiling?
Applying paint to the floor, roofs and walls.
Removing concrete on the floor, roofs and walls
Covering the floor, roofs and walls with tiling
Removing tile from the floor, roofs and walls.
Which of the following is NOT part of plastering materials?
Cement
Sand
Water
Oil
