It is a drawing instrument used when transferring measurements, dividing lines and arcs into the desired number of equal parts and it can easily transfer accurate measurements by adjusting the divider points. 

It is the most common tool used and it is made of steel approximately 1/8 thick and with 3/4 inch width and 6 to 12 inches long.

It is a measuring instrument which is a combination of 45°, 90° and a protractor

A tool usually used to reproduce the drawing with enlarge or reduce its original size

A drawing material wherein it is used for general purpose when making drawing

It is a flexible measuring tool that can be extended and can also be used to measure curves.

A measuring tool/instrument use as a guide when making corner joints such as 90 and 45 degrees in wood or metal works and it is also use to test the squareness of an object.

A tool made of high grade steel which are hardened and tempered which has rows of teeth that form, shape and finish metal by removing small chips and smoothing rough edges of the metal surface.

It is a sturdy vise with movable jaws that easily goes back or forth by raising the handle.

It is a hand tool that use to grip the stock tightly and enough to hold object.

It is a tool made up of metal with irregular holes and it is useful tool to protect the rest of the drawing lines when clearing up unnecessary lines.

It is a drawing instrument use when drawing circles and arcs.

A tool made of different sizes and appearance that are fitted to its purpose and designed to hold work pieces securely while performing the following operations like grinding, bending, fitting and cutting of metals.

It is a hand tool with an adjustable or movable jaw to fit various sizes of nuts and bolts. 

It is a hand tool use to drive screws with a positive like tip.

It is a drawing material used where extreme accuracy is required especially working on graphs, diagrams and charts.

It is a system of linear measurement which it is based on the standard                              meter

It is the process wherein geometric problems are solved accurately in mechanical drawings 

It is a a quickly executed freehand drawing that is not intended as a finished work  

It is file intended for filling square of rectangular holes

It is used for chipping flat surfaces, cutting off rivets or metal fasteners, thinsheets, and small bars.

It is used in removing points, burrs and sharp edges from metal surfaces and similar parts. This tool is made of hardened steel of various shapes that fit according to each purpose.

A striking tool is used for straightening bending and deforming metals which has two faces.

A drafting tool used for drawing horizontal lines

A tooth cutting tool usually with the solid and adjustable frame.

Tool used to tighten and loosen screws by pushing or pulling screws in a  rotating manner.

This drafting tool is used to protect the rest of the drawing when removing unnecessary lines.

In safety implementation, maintain the space around the fire extinguisher and evacuation passages free

Cleaning is a simple process that can be applied to hand tools.

The proper procedures in  loosening /tightening bolts and nuts and other fittings should be followed in order to maintain its thread.

Maintenance, usually focuses on the program of works done in the operation of power plants in machines that are in trouble of stopping its function.

The term “repair” means a scheduled or a planned visit of tools or equipment for inspection and from there, reports and recommendations are developed and the next tasks to be decided such as cleaning, application of lubricants, dismantling and others