Dashed line types shows there are multiple edges stacked in the drawing.

Each drawing sheet represents a new unique part.

A "+" on the drawing is always the center of an arc or circle.

A part dimensioned "0.500" has the same acceptable deviation as a part dimensioned "0.5".

Tolerances in the title block over-ride a dimension's tolerances.

Part numbers and descriptions help identify the part in the drawing.

Individual view scales always match the sheet scale.

Assembly items can be pulled from multiple documents and standard content.

Best practice is to copy documents then merge parts together when multiple users need to work on the same document.

When adding a mate, using rotate ____________.

For parts split into two pieces best practice is to __________.

__________ designate a reference dimension.

The ______ symbol represents a counterbore.

When a 12in long part is scaled 1:4, it appears to be ___in long on the paper.

What symbol represents a diameter?

What balloon symbol is associated with a Bill of Materials Line?

A projected view has an associated ___________ view.

When detailing a symmetric part that is not a revolved piece what line shows the part is symmetric.

What is the most important part of a revision block?

A ______ view type is based on an imaginary cut across the part.

When a small piece of information needs to be shown close up, a ____ view is best.

A bill of material is typically found _________.

Dashed lines on an assembly drawing are called _________ lines.

A drawing view normal to an angled faces is called a(n) _____ view.

Using the ________ feature can shorten long sections in a drawing view.

In order to save a design state, it's best practice to _______.

Which of the following is not a tab type found in Onshape?

When a document is shared, the third party has access to ____________ within the document

What can you NOT view in Follow mode?