Font size
WorksheetsWheel Alignment
Total questions: 35
Worksheet time: 19mins
Which angle does the picture represent?
Positive camber
Negative camber
Which angle does the picture represent?
Toe out
Toe in
Which angle does the picture represent?
Negative caster
Positive caster
Which angle does the picture represent?
Positive camber
Negative camber
Which angle does the picture represent?
Negative caster
Positive caster
Which angle does the picture represent?
Toe out
Toe in
Imaginary line drawn perpendicular to the rear axle's centerline is called the?
Doglegged angle
Center-line angle
Thrust Angle
Track angle
What caused this tire wear?
Camber
Caster
SAI
Toe
The outward tilt of the top of the tire is called?
Toe
Negative Camber
Caster
Positive Camber
What caused this tire wear?
Under-inflation
Over-inflation
Excessive Caster
Excessive Camber
Cross Camber will create a pull or drift if it is greater than ______ degrees side to side
.75
2.00
1.00
.50
This tire wear was caused by?
Over-inflation
Camber
Under-inflation
Toe
When performing a pre-alignment inspection you should check what?
Tire Air Pressure
Wheel Bearings
Suspension Components
Vehicle Ride-Height
All of the above
Negative caster helps to fight a pull/drift created by road crown?
False
True
What is causing this tire wear
Over-inflation
Toe In
Toe out
Under-inflation
The Inward tilt of the top of the tire is called?
Negative Caster
Positive Camber
Positive Caster
Negative Camber
The Forward tilt of the strut when viewed from the side is called?
Positive Camber
Negative Caster
Positive Caster
Positive Camber
SAI or steering axis inclination is adjustable?
True
False
If the SAI angle is out of specification what does this indicate (what's wrong) ?
Toe is out of specification
Camber is out of specification
Caster is out of specification
There is a bent component in the suspension/steering system
The rearward tilt of the strut when viewed from the side of the vehicle is called?
Negative Caster
Set Back
SAI
Positive Caster
Which of the following angle is the most critical for tire wear.
Camber
Caster
Toe
Thrust Angle
A Dry Park Test involves shaking the steering wheel back and forth while observing the steering/suspension system for play or movement.
False
True
When another technician is pulling a vehicle onto the alignment rack where should you stand to guide them onto the alignment rack?
In front of the rack
Behind the rack
The technician shouldn't need help if he knows what he's doing
Off to one side of the alignment rack, for safety
How many minutes equals one degree?
100
50
60
1
Excessive positive toe causes excessive
toe out
toe in
Which of these is a direct tire wear angle? (select all that apply)
Toe
Caster
Camber
The four reasons for an alignment are
maintenance, performance, standard, modified
standard, modified, corrective, collision
maintenance, corrective, modified, collision
maintenance, modified, standard, frame pulling
Camber roll is caused by which suspension angle?
Total toe
Front caster angle
Front camber angle
All of the above
Name component ?
Spring
Shock
Strut
Bearing Plate
What part is this???
Inner Tie Rod
Connector Link
Steering End
Outer Tie Rod
What is this parts name??
Suspension Connector
Sway Bar
Inner Tie Rod
Sway Bar End Link
What is it?
Strut Rod
Inner Tie Rod
Steering Connector
Stabilizer Link
What are acceptable names for this component
Sway Bar Connectors
Stabilizer End Links
Strut Rod End Links
Sway Bar End Links
Which statement is true about springs?
Torsion bars are often adjustable to control ride height
Leaf springs use a center bolt
Spring can sag resulting in lower ride height
All of the above
When performing an alignment, a scan tool is likely to be needed to perform which operation?
Measure rear toe (total)
Calibrate steering angle sensor
Center the steering wheel
All of the above
