Font size
S
M
L
XL
WorksheetsRevit Pro Prep Part 3-50
Total questions: 48
Worksheet time: 16mins
Name
Class
Date
1.
Which of the following can NOT be defined prior to placing a wall?
a)
Unconnected Height
b)
Base Constraint
c)
Location Line
d)
Profile
e)
Top Offset
2.
Identify the stacked Wall
a)
A
b)
B
c)
C
d)
D
3.
Select the TWO that are wall type properties
a)
Coarse fill pattern
b)
Location line
c)
Top Constraint
d)
Function
e)
Base Constraint
4.
Select ONE item that is used when defining a compound Wall
a)
Material
b)
Sweeps
c)
Grids
d)
Layer
e)
Fill Patter<br />
5.
Use this key to cycle through selections:
a)
TAB
b)
CTRL
c)
SHIFT
d)
ALT
6.
To change the structure of basic wall you must modify its:
a)
Type Parameter
b)
Instance Parameter
c)
Structural Usage
d)
Function
7.
The construction of a stacked wall is defined by different wall _____.
a)
Types
b)
Layers
c)
Regions
d)
Instance
8.
If a stacked wall is based on Level 1 but one of its sub walls is on Level 7, the base level for the sub wall is Level_____?
a)
7
b)
1
c)
unconnected
d)
variable
9.
The boundary of a floor is defined by:
a)
Model Lines
b)
Reference Line
c)
Slab Edge
d)
Sketch Line
e)
Drafting Line
10.
For the stairs shown, the vertical green lines represent
a)
Risers
b)
Boundary Lines
c)
Stringers
d)
Run
e)
Railings
11.
Stairs can be placed on multiple levels at a time.
a)
true
b)
false
12.
You can change the direction of stairs using the flip arrows.
a)
true
b)
false
13.
Identify the type of roof<br />
a)
Gable
b)
Hip
c)
Tar and Gravel
d)
Flat
e)
Shingled
14.
Name the three methods used to place a roof:
a)
By face
b)
By profile
c)
By footprint
d)
By extrusion
e)
By Sketch<br />
15.
The extrusion of a roof can extend only in a positive direction from the selected work plane.
a)
true
b)
false
16.
When attaching a wall to a roof, the profile of the wall does not change.
a)
true
b)
false
17.
The symbol circled indicates:
a)
Slope
b)
Top Constraint
c)
Roof Boundary
d)
Gutter
18.
To place a railing<br />
a)
Draw a path
b)
Select a host element
c)
Click to place
d)
Work in section view
19.
You can change a Generic 12" Floor to a Wood Joist 10" Floor using the:
a)
Properties filter
b)
Options Bar
c)
Type Selector
d)
Modify Ribbon
20.
You can create a topo surface by placing points OR:<br />
a)
Creating from import
b)
Drawing contour lines
c)
drawing a path
d)
picking points
21.
To identify a family type of an element:
a)
Select the element, look on the Project Browser
b)
Hover over the element and read the description that is displayed
c)
Select the element, use Filter
d)
Use Insert, Load Family
22.
Furniture families are hosted<br />
a)
true
b)
false
23.
Window Families are hosted<br />
a)
true
b)
false
24.
To control the visibility of topo surfaces using the Visibility/Graphics dialog:<br />
a)
Use Annotation Categories
b)
Use Model Categories
c)
Use Site > Topography under Model Categories
d)
Use Topography under Model Categories
25.
To add a loadable family to a project, use the ______ tab.<br />
a)
Create
b)
Insert
c)
Family
d)
Architecture
26.
To create a new system family you:<br />
a)
Use a Revit family template
b)
Modify the instance parameter of an existing similar family
c)
Duplicate a similar system family and modify the type parameter
d)
Modify the type parameters of a similar system family
27.
When a room schedule does not reflect the correct room for an element, the element family should be modified by:
a)
Moving it into the correct room
b)
Modifying the element's base point
c)
Making the element "room aware"
d)
Modifying the room schedule
28.
Room calculation Points are used to:
a)
Calculate the square footage of a room
b)
Make loadable families "room aware"
c)
Calculate the volume of a room
d)
Create room schedules
29.
Before you add a building pad, you need a:
a)
Floor
b)
Topography
c)
Wall
d)
Isolated foundation
30.
To create a new door type of a door family without existing the active project:<br />
a)
Select the door, right-click and select Edit Family
b)
Go to the Properties panel, select Edit Family
c)
Go to the Project Browser, locate the door family, right-click and select New Type
d)
Go to the Insert tab, select load family
31.
The Mass shown was created using:<br />
a)
Sweep
b)
Extrude
c)
Blend
d)
Swept Blend
32.
The Mass shown was created using:<br />
a)
Sweep
b)
Extrude
c)
Blend
d)
Swept Blend
33.
Straight grid lines are visible in the following view type:<br />
a)
ELEVATION
b)
PLAN
c)
3D
d)
SECTION
e)
DETAIL
34.
Which TWO shortcut key launch the Visibility/Graphics<br />
a)
VG
b)
VV
c)
VE
d)
VW
e)
F5
35.
Objects hidden using the temporary Hide/Isolate tool are not visible but they are still printed<br />
a)
true
b)
false
36.
Select the THREE options for Detail Level for a view<br />
a)
COARSE
b)
SHADED
c)
FINE
d)
HIDDEN
e)
MEDIUM
37.
If you delete a view,, the annotations placed in the view ae also deleted<br />
a)
true
b)
false
38.
A camera cannot be placed in an elevation view<br />
a)
true
b)
false
39.
To change the graphic appearance of your model from Hidden line to Realistic you:<br />
a)
Modify the Rendering settings in the view control bar
b)
Edit visibility/graphic display option in View properties
c)
Change graphic display option in the view properties
d)
Click Visual Styles on the view control
40.
A story level is the color:<br />
a)
Yellow
b)
Blue
c)
Black
d)
Green
41.
If you create a level using the COPY or ARRAY tool, what type of level is created?<br />
a)
Story
b)
Non-story or reference
c)
Elevation
d)
Plan
42.
This type of level does not have a PLAN view associated to it:<br />
a)
Story
b)
Non-story or reference
c)
Elevation
d)
Plan
43.
In which view type can you place a level?<br />
a)
PLAN
b)
LEGEND
c)
3D
d)
CONSTRUCTION
e)
ELEVATION
44.
To display or open a view:<br />
a)
Double-click the view name in the project browser
b)
Double-click the elevation arrowhead, the section head or the callout head
c)
Right-click the elevation arrowhead, the section head or the callout head, and select Go to View
d)
Select the surf tool from the ribbon
45.
Select the icon used to lock a 3D view<br />
a)
A
b)
B
c)
C
d)
D
46.
To change the structure of basic wall you must modify its:<br />
a)
Type Parameter
b)
Instance Parameter
c)
Structural Usage
d)
Function
47.
Scope boxes control the visibility of:<br />
a)
Elements
b)
Plumbing Fixtures
c)
Object Styles
d)
Grid Line and Levels
48.
If you rotate a cropped view:<br />
a)
Any tags will automatically rotate with the view
b)
The crop region will automatically resize
c)
The Project North will change
d)
Any hidden elements will become visible
Reset
