NEW
Font size
WorksheetsAR 143 - FINAL TERM EXAMS
Total questions: 25
Worksheet time: 19mins
A type of rock that is formed by the deposition of sediment. Limestone is an example of this rock.
Igneous rock
Sedimentary rock
Metamorphic rock
Slate is a dense and fine-grained rock, typically black in color, formed by compression of various sediments. What classification of rock is slate?
Metamorphic rock
Igneous rock
Sedimentary rock
Piece of rocks used in construction that is roughly cut to sizes from 3/8 to 6 inches.
Rubble
Dimension stone
Crushed stone
Cut stone
Otherwise known as flat slabs, this type of stone consists of thin pieces used in pavers or roof shingles.
Flag stone
Crazy-cut stone
Marble
Dimension stone
Type of sedimentary rock consisted of quartz and is used for it's workability and low water absorption.
Sandstone
Limestone
Shale
Marble
These are the advantage of Stone as a building material, except for:
Strength and durability
Weather resistance
Versatility
Construction cost
These are the disadvantages of Stone as building material, except for"
Weight
Requires skilled workers
Handling and transportation
Water absorption
In stone construction, this type of Ashlar stonework is the most systematic and has a pattern based arrangement.
Regular course
Irregular course
Broken
Unbroken
Ivatan house's wall construction is a prime example of:
Rubblework
Paneling
Ashlar
Lintel
This type of stone is used in construction due to its versatility, fire and moisture resistance. It can be formed into tiles, wall panels and plastering.
Gypsum
Clay
Lime
Gravel
This church in Manila is famously known for being the only Steel Catholic church in the country.
San Agustin Church
San Sebastian Church
San Guillermo Church
Santa Ana Church
A metal in which iron is the principal element
Feral
Ironic
Ferrous
Alloy
Which is not an advantage in using Stainless Steel in construction?
Lightweight
Doesn't rust
Malleability
Low cost
This steel products has various sizes and shapes such as Flat bar, Angle bar, Wide Flange Beam and I beams.
Rolled steel sections
Steel pipes
Sheet piles
Steel joists
This material is used in excavating basement floors as it serves as a retaining wall to stabilize the soil from eroding.
Sheet piling
Metal studs
Ground fencing
Soil mesh
Steel pipe section is measured in dimensions refering to:
It's inside diameter (ID)
It's outside diameter (OD)
It's nominal pipe size (NPS)
All of the above
Steel is often combined with concrete to counteract concrete's weak _____ strength.
tensile
compressive
torsion
absorptive
A non-ferrous metal used for electrical wires and cables due to its high conductivity.
Aluminum
Copper
Lead
Tin
A flat glass that is extremely smooth and nearly distortion-free. It is manufactured by pouring molten glass onto a surface of molten tin and allowing it to cool slowly.
Float glass
Plate glass
Sheet glass
Crown glass
Installation of two parallel panes of glass with sealed air gap to reduce the transmission of heat and sound.
Double glazing
Wet glazing
Face glazing
Air glazing
A small finishing nail.
Brad
Staple
Stirrup
Warren
Identify this type of nailing:
Toe nail
Blind nail
Face nail
End nail
Part of the concrete mixture that sets and hardens components when mixed with water. Often mistakenly referred as concrete.
Cement
Ash
Lime
Admixture
Type of paint finish that can fix the imperfections of the surface it is painted on. It is not advised on kitchen walls because it is hard to maintain and clean.
Matte
Semi-gloss
High-gloss
Eggshell
Finely ground, insoluble substance in a liquid vehicle to impart color and opacity to a paint.
Binder
Pigment
Solvent
Oil
