WorksheetsELDT Ch 4 Basic Control
Total questions: 10
Worksheet time: 50mins
What is the very first step you should take when starting a tractor-trailer engine?
Depress the clutch
Apply the parking brake
Turn the ignition switch/key on
Apply the service brakes
What is the appropriate cool down period for a tractor-trailer engine?
A cool down period is not necessary
Between 30-60 minutes
It depends on the weather (temperature and humidity)
It varies based on engine type, nature of the trip, and cargo hauled
When setting your tractor-trailer in motion, how can you tell the friction point of your clutch has been reached?
Your RPMs decrease
Your RPMs increase
Your RPMs remain the same for a full 5 seconds
None of the above
After stopping your tractor-trailer,:
pump the brakes to charge the air tanks.
engage the emergency brake.
maintain enough brake pressure to keep the vehicle stationary.
both B and C.
When testing your tractor-trailer hook-up, pull gently against the locked trailer brakes and stop when:
you reach between 100-300 RPMs.
your tractor does not move for at least 5 seconds.
your trailer brake button pops out.
you feel the engine start to drag down.
What is off-tracking?
The amplification of side-to-side movement through the rear of the trailer
When the rear wheels follow a different path than the front wheels while making a turn
When the rear wheels of a trailer lock up, causing the trailer to swing around
When the wheels of a tractor lose traction and the vehicle veers off the road
What is essential for you to do when you're making a left turn in an intersection with multiple lanes?
Signal no more than 50 feet in advance.
Speed up before you make the turn.
Start in the rightmost lane.
Begin turning as soon as your cab passes the crosswalk.
What factors will determine how much time is needed to get your vehicle up to speed to safely merge with oncoming traffic on an interstate?
The length of the on-ramp
The weight of your load
The on-ramp's degree of turn
All of the above
What should you do if you are unsure what may be behind your vehicle
while backing?
Stop, get out of your vehicle, and check your path.
Check your mirrors and back quickly before anything can enter your path.
Stick your head out the window and look back during the entire maneuver.
All of the above.
What should you do if you cannot easily correct trailer drift (your vehicle is too far out of position) when backing your vehicle?
Find someone to back your vehicle for you.
Get a qualified spotter to help you get back on path.
Pull up, reposition the trailer, and start over.
Turn the tractor around and watch both mirrors.
