NEW
Font size
WorksheetsTLE - Masonry
Total questions: 50
Worksheet time: 8mins
Which is the art of building with stone, bricks, concrete blocks of other similar materials?
Carpentry
Concrete
Mortar
Masonry
A mason wants to create a smooth finish of concrete after floating. Which tool is appropriate?
Brick hammer
Concrete trowel
Plane
Float
A mason wants to set or cut brick, block, or stone. Which tool is appropriate?
Claw hammer
Crandall
Mason's hammer
Star drill
A mason wants to repair mortar joints. Which tool is appropriate?
Pointing trowel
Crandall
Cold chisel
Brick trowel
A mason wants to mix and move mortar in brick laying. Which tool is appropriate?
Pointing trowel
Crandall
Cold chisel
Brick trowel
A mason wants to mix concrete. Which tool is appropriate?
Shovel
Buttering
Trowe
Float
A mason lays bricks. Which tool is appropriate?
Shove
Hawk
Trowe
Float
Which is flat with handle at the back usually made of wood?
Shovel
Buttering
Trowel
Float
Which tool is used in shaping and forming concrete edges?
Shove
Buttering
Edger
Float
A mason wants to mix concrete for column and slab. Which mixture is appropriate?
1 : 2 : 4
1 : 1 1/2 : 3
1 : 2 1/2 : 5
1 : 3 : 6
A mason wants to mix class B mixture. Which mixture is correct?
1 : 2 : 4
1 : 1 1/2 : 3
1 : 2 1/2 : 5
1 : 3 : 6
A mason wants to mix concrete for a slab in the ground. Which mixture is appropriate?
1 : 2 : 4
1 : 1 1/2 : 3
1 : 2 1/2 : 5
1 : 3 : 6
A mason wants to mix concrete for hollow block filler. Which mixture is appropriate?
1 : 2 : 4
1 : 1 1/2 : 3
1 : 2 1/2 : 5
1 : 3 : 6
Which refers to the ease with which the fresh concrete can be molded without segregation?
Plasticity
Consistency
Mobility
Grout
Which refers to the degree of wetness or slump of the concrete mixture?
Plasticity
Consistency
Mobility
Grout
Which is an artificial stone that results from mixing cement, sand, gravel, and water?
Concrete
Grout
Mortar
Bricks
Which is an artificial stone that results from mixing cement, sand, and water?
Concrete
Grout
Mortar
Bricks
Which is an artificial stone that results from mixing cement and water?
Concrete
Grout
Mortar
Bricks
Which term refers to the process of finishing using mortar?
Finishing
Fine finishing
Concreting
Plastering
A mason wants to lay ceramic tiles. Where does he start?
Front
Left
Right
Center
A mason wants to lay concrete hollow blocks. Where does he start?
Front
Left
Right
Center
A mason wants to mix mortar for plastering. What does he mix?
cement and water
cement and sand
sand and water
water and cement
A mason wants to lay concrete hollow blocks into a 10 sq.m. wall. How many CHB are needed?
100 pcs.
120 pcs.
122.5 pcs.
125 pcs.
A mason wants to lay 16" by 16" ceramic tiles in a 10 sq.m. room. How many tiles are needed?
60 pcs.
61.5 pcs.
60.5 pcs.
63 pcs.
How many CHBs are installed for a wall having a dimension of 2.5 m width and 4.0 m height?
125 pcs.
122.5 pcs.
300 pcs.
400 pcs.
Which of the following classes of mixture produces a hard or tough concrete?
class AA
class A
class B
class C
Which term refers to inert materials when bound together into a conglomerated mass from concrete?
Aggregates
Grave
Cement
Water
These are compress baked clay that are processed into workable materials?
Stone
Sand
Bricks
CHB
Which tile is appropriate in the toilet and bathroom flooring?
Glaze tiles
Ceramic tiles
Non-skid granite tiles
Clay tiles
Bricks are laid where its longer side is exposed to view. This arrangement is called ________.
Header
Stretcher
Bond
Mortar
The most widely used masonry materials for construction works are?
Ashlar
Bricks
Rubble stones
Concrete hollow blocks
It is a masonry material manufactured from clay and other materials?
Stones
Stucco
Bricks
Concrete pavers
What is the tool used to guide the vertical position in laying bricks?
Plumb bob
Water hose level
Spirit level
String or chord
Which among the following is a surface finishing tool for concrete?
Crandal
Bolster
Float
Spade
Which of the following is NOT a requirement to consider in proportioning concrete mixture?
Economy
Workability
Strength
Flexibility
Concrete is said to be workable if it can be molded or deformed without segregation. This characteristic is known as ________.
Consistency
Plasticity
Mobility
Workability
The following are factors that regulate the strength of concrete, EXCEPT:
Correct proportion of ingredients.
Proper method of mixing
Adequate protection of concrete during curing.
Dropping concrete mixture from high elevation.
What class of concrete mixture is consisting of 1 bag cement, 2 cu. ft. of sand, and 4 cu. ft. of gravel or 1:2:4?
Class AA
Class A
Class B
Class C
How many cubic yard of concrete do you need to cover a space with an area of 25 square foot and a slab thickness of four (4) inches?
0.31 cu. yd.
0.32 cu. yd.
0.25 cu. yd.
0.51 cu. yd.
What tool or instrument is used to set-up the lateral level of a concrete fence?
Water hose leve
Spirit level
Plumb bob
Straight edge
According to the building code of the Philippines, for how many days shall concrete be maintained above 10 °C temperature and in a moist condition?
3 days
5 days
7 days
10 days
Which of the following are known as coarse aggregates in a concrete mixture?
Sand
Soil
Gravel
Stones
What do you call the process of hardening of concrete?
Curing
Setting
Hardening
Molding
What is the type of hydraulic cement is widely used in small and large construction including roads and highways?
Hydraulic cement
Portland cement
Pozzolan cement
Lime
Which of the following should be avoided in placing concrete to its final form?
segregation of particles
displacement of form and displacement of reinforcement in the form
poor bond between successive layers of concrete
all of the above should be avoided
What ingredient in concrete is added to the batch immediately before or during its mixing to improve its durability and accelerate strength development?
Fine aggregates
Coarse aggregates
Admixture
Water
Which of the following refers to the structural reinforcing member that holds or binds together the main reinforcement of a column?
. Lateral tie
Stirrups
Spiral tie
Rebars
The structure that holds the poured concrete until it hardens to form the concrete beam or post.
Scaffolding
Batter board
Forms
Stake
To convert from feet to get number of meters, multiply feet by?
0.3048
25.4
30.48
2.54
Which is a binding agent that reacts with water to form a hard stone-like substance?
Glue
Cement
Mortar
Grout
