WorksheetsSuspension quiz
Total questions: 15
Worksheet time: 8mins
Which are types of springs?
Coil
Torsion bar
Leaf
ALL of the above
What type of suspension is illustrated in the photo?
Leaf spring
McPherson strut
SLA/double wishbone
ALL of the above
What type of suspension is in the photo?
Double wishbone/SLA
McPherson strut
leaf spring
ALL of the above
Which type of ball joints are shown in this photo?
Load carrying
Guiding
Neither
One of each
What is the purpose of a shock absorber?
To provide support for the additional weight loaded into the car
To dampen oscillations from springs
To reduce noise
To reduce body roll
What is the purpose of a stabilizer bar?
To provide support for the additional weight loaded into the car
To dampen oscillations from springs
To reduce noise
To reduce body roll
What is the purpose of an adaptive/load levelling suspension?
To provide support for additional weight loaded into the car
To dampen oscillations from springs
To reduce noise
To reduce body roll
The device in the photo would adjust which angle?
TOE
CAMBER
CASTER
All of the above
The device in the photo would adjust which angle?
TOE
CAMBER and/or CASTER
All of the above
The photo illustrates and extreme example of:
Typical handling characteristics of French made cars
Nosedive
Oscillation
Body roll
To install this new component, you should use:
A ball joint press
An air chisel
New bolts and proper torque
A jack
The first symptom a driver will notice of a worn out stablizer link is:
extreme body roll
a rattlling/clunking noise
oscillation when driving over bumps
a leak
in the tire size "235 75 15", the wheel's diameter is:
235 inches
75 inches
235 mmm
15 inches
In the tire size "235 75 15", the sidewall height is:
235 mm
15 mm
235mm x 0.75
75 inches
When deciding what tire pressure to fill a tire to, look at:
The information sticker inside the driver door
The maximum pressure on the tire sidewall
All tires should be inflated to 35 psi no matter what
None of the above
