Font size
WorksheetsAuto transmission
Total questions: 40
Worksheet time: 14mins
2 Technicians are discussing Automatic Transmissions. Tech A states that all automatic transmissions use standard Automatic Transmission Fluid (ATF). Tech B states there are different types of ATF. Who is correct?
Tech A only
Tech B only
Both Tech A and Tech B
Neither Tech A nor Tech B
2 Technicians are discussing Automatic Transmissions. Tech A states all transmissions require the engine to be off when checking the ATF level. Tech B states the engine should always be running when checking the ATF level. Who is correct?
Tech A only
Tech B only
Both Tech A and Tech B
Neither Tech A nor Tech B
2 Technicians are discussing Automatic Transmissions. Tech A states the transmission should always be at operating temperature when checking the ATF level. Tech B states you should check the service manual to find out what temperature the transmission should be at before checking the ATF level. Who is correct?
Tech A only
Tech B only
Both Tech A and Tech B
Neither Tech A nor Tech B
What component is pictured?
Torque Convertor
Clutch Pack
Valve Body
Planetary Gear Set
Vehicles with automatic transmissions have:
Flywheels
Flex Plates
Flux Capacitors
Pressure Plates
ATF is generally:
Red
Golden Brown
Black
Clear
A technician is inspecting transmission fluid. What should the tech be looking for:
Color
Smell
Presence of metal flakes
All of the above
Turbines, impellers and valve bodies are part of which type of transmission?
Manual
Automatic
Dual Clutch
Standard
Shift forks, synchronizers and blocker rings are part of which type of transmission?
Manual
Automatic
Dual Clutch
Standard
True or False? Most manual transmissions have a screw on filter.
True
False
Name the component in the picture
automatic trans front pump
rear output shaft
turbine spline
pump housing
A small gear (input) has 5 teeth and the larger (output) gear has 25 teeth. This would be a ratio of:
5:1 gear reduction
1:5 gear reduction
2:4 gear reduction
6:1 gear reduction
Name the component in the picture :
drum
band
clutch locker
one way friction valve
This component sends fluid and hydraulic pressure to the components inside a transmission
front hydraulic pump
servo
fluid coupler
planetary gear set
A planetary gear set consist of a Sun gear, planetary gears and a __________________.
valve body
check valve
clutch disc
planet carrier
The job of the transmission is to (select all correct answers)
Multiply and divide torque by providing different gear ratios
Provide the vehicle with a way of moving in reverse
Multiplying the fuel consumption of the vehicle
All of the above
Input shaft end play is measured with what tool?
Feeler gauge
Micrometer
Ruler
Dial indicator
Thepart(x)showninthefigureisa:
Sun gear
Ring gear
Pinion gear
Carrier
The unit shown in the figure is a :
Catalytic converter
Friction clutch
Torque converter
Final drive and differential
The part (x) shown in the figure is a :
Pinion gear
Ring gear
Sun gear
Carrier
The unit assembly shown in the figure is a/an :
Engine oil pump
Transmission oil pump
Steering oil pump
Engine water pump
Rev matching
Money shifting
Which one of the following should be used to finally tighten flywheel bolts?
An air wrench
An impact wrench
A torque wrench
A rachet wrench
What is the most accurate equipment to check the flywheel face for warping prior to replacing a clutch?
Micrometer
vernier caliper
dial test indicator
feeler gauge and straight edge
What type of final drive crown wheel gear is shown in the image?
Spur
Helical
Hypoid
Planet
What type of transmission will a front wheel drive vehicle use?
Rear axle
Hypoid axle
Dead axle
Transaxle
What could be damaged when a transmission unit is removed on some vehicles ?
Suspension dampers
Cylinder head
Front cross member\
Coolant pipes or connections
Which one of the following is a routine service task carried out on a hydraulically operated clutch mechanism?
Adjusting the slave cylinder position
Replacing the master cylinder seals
Checking the fluid level in the reservoir
Checking the condition of the flywheel face
Under what condition are the planet wheels of a differential unit rotating?
When the vehicle is reversing
When the vehicle is turning a corner
When the vehicle is travelling on the overrun
When the vehicle is travelling straight ahead
What is one purpose of a final frive crown wheel and pinion?
Allow the planet wheels to drive the crown wheel
Allow the road wheels to rotate at different speeds
Turn the drive through 180 degrees
Turn the drive through 90 degrees
helical gear
