Font size
Worksheets19EE2032 - MCQ
Total questions: 20
Worksheet time: 7mins
The ____ is used in a manual transmission to couple or decouple the gearbox to the power plant in a conventional IC engine vehicle.
clutch
spark plug
gear
wheel
The ratio of fuel consumption per unit time (in kg/hr) to power produced by engine (in kwh) is called ___________.
Specific fuel consumption (SFC)
Specific absortion rate (SAR)
Special electric machine (SEM)
Porsche showed his first hybrid car at the Paris Exposition in the year (a)
Carbon Dioxide (CO2) is a chief greenhouse gas.
True
False
The device preferred for DC Chopper operation due to its high switching frequency and low power is ______________.
Power MOSFET.
Power BJT
IGBT
Thyristor
The power converter is used to supply the electric motor with proper voltage and current.
True
False
The Hall sensor in BLDC motor is placed after every (a) degree.
The synchronous speed of an AC machine, if the no. of poles (P) is 4 and frequency (f) is 50Hz is (a) rpm
In the 180-degree mode operation of a three-phase voltage source inverter (VSI), the time interval between each switch turning on will be _____ degrees.
60
120
180
30
In the ______ hybrid system it involves a complex configuration with the bi-directional power flow of the electric motor.
complex
hybrid
series
parallel
A hybrid vehicle drivetrain usually consists of more than two power trains.
True
False
________ batteries are now considered to be the standard for modern battery electric vehicles.
Li-ion or Lithium ion
Li-Pol or Lithium Polymer
Lead Acid
Flywheel stores _______ and also have high specific power but less specific energy.
kinetic
chemical
electrical
mechanical
Find the total amount of energy stored flywheel, when the moment of inertia is 2 kg/m2 and the rotational speed is 5 r/s.
25
50
200
100
Specific energy is the amount of electrical energy stored per cubic meters of the battery volume.
False
True
Supercapacitors are also known as Electric Double Layer Capacitor (EDLC).
True
False
A fuel cell is an electrochemical cell that converts (a) energy of a fuel and an oxidizing agent through a pair of redox reactions.
In a hybrid drive train, steady (average) power has a ______ value.
zero
unity
high
low
In a battery management system, SOC means _________.
state of charge
state of component
safe operating current
safe operating condition
In the tractive effort analysis, the drag coefficient Cd can be reduced by good vehicle design and its typical value is between _______.
0.3 - 0.7
0.1 - 0.2
6 - 7
1 - 5
