WorksheetsOnshape Test Prep
Total questions: 30
Worksheet time: 16mins
In using Onshape to make a PART, first, you Create -> Document, then choose Sketch, then what do you have to do?
Choose which plane (front, top or right) to draw
Extrude the 2d sketch to make a 3d part
Choose the size of your drawing
Set the Workspace units
Which individual sketch tool was used in the sketch below?
Arc
Offset
Fillet
Trim
Complete circles shall always be dimensioned using...
meters
diameter
lines
degrees
Which icons is the Line Tool, used to draw straight lines?
[Multi-select] Select ALL answers that are correct.
Which of the following can be used to draw rectangular shapes?
Which icon is the Sketch Fillet Tool, used to add fillets (rounded corners) on a sketch corner.
Extrude features can only be created in a linear direction.
True
False
Which of the following is NOT true of creating a Revolve feature?
Revolved features can be used to remove material
A Revolve feature must merge with an existing part
An axis of revolution must be specified in order to create a Revolve feature
A Revolve feature can be created in two independent directions
Existing models edges and faces can be used to create sweep features.
True
False
The term Extrude is used when...
a line is drawn between two defined points,
a 2d profile is pulled into a 3d shape.
a copy of a sketch needs to be created.
a workplane is created.
CAD stands for...
Creative Actual Designs
Computer Aided Design
Common Assisted Drawing
Computer Assisted Drawing.
Sketch: Activates the line command
K
S
L
O
Sketch: Corner rectangle
R
S
G
O
The first step in creating a new part is deciding which feature to create first. Once that decision is made, the next step is to decide which plane to sketch on.
True
False
Which of the following tools can be used to add new views to a drawing?
Datum
Dimension
Note
Insert View
A Sketch in CAD is like...
a sheet of paper used to start a drawing.
a straight edge applied to a corner.
an arc applied to a specific radius.
the rounded edge of a desk.
A Workplane in CAD is like a...
sheet of paper.
window in a house.
part of an automobile.
surface or table that a sketch can be drawn on.
A Profile in CAD is...
a open shape used to create a 3d model.
a closed shape used to create a 3d model.
a four sided object used to create a 3d model.
a straight edge used to create a 3d model.
Assembly refers to...
multiple parts combined to create a model.
one part used to create a model.
taking a part of a 3d model to create a 2d model.
removing material form a 3d model.
A profile that is rotated around an axis to create a 3D shape...
Extrude
Revolve
Assembly
CAD
Complete circles shall always be dimensioned using...
meters
diameter
lines
degrees
Which of the following signify that a sketch is fully defined?
All lines are blue.
All lines are black.
None of the above.
What type of view is this drawing
Graphic
Orthographic Projection
Section View
Isometric
What is the diameter of the hole?
20
15
22
30
What is the height of this object?
3.2
4.4
7.6
12
What is the diameter of the smaller circle
2.0
2.1
3.6
8.4
What is the width of the Batlogo
100.9
137.2
219
185.5
A measurable extent, such as the three principal dimensions of an object: width, height, and depth.
Dimension
Two-Dimensional
Hidden Line
Extension Line
