WorksheetsD&M 1.2
Total questions: 44
Worksheet time: 24mins
Which of the following is an example of an Isometric Sketch?
None of the Above
A preliminary visual of an idea for a design.
Isometric Sketch
Thumbnail Sketch
Multiview Sketch
Three-dimensional
Which of the following is an example of a Multiview Sketch?
None of the Above
Three-dimensional: _________________
A sketch, typically including the top, front, and right primary views of an object that are drawn using orthographic projections.
Having a flat surface.
A preliminary visual of an idea for a design.
Having the dimensions of height, width, and depth.
A sketch in which an object’s parallel edges are drawn with parallel lines, typically at 30-degree angles to the horizontal baseline.
Isometric Sketch
Thumbnail Sketch:
Multiview Sketch:
Cube
Which of the following is an example of a Thumbnail Sketch?
None of the Above
Multiview Sketch: ________
A sketch in which an object’s parallel edges are drawn with parallel lines, typically at 30-degree angles to the horizontal baseline.
A preliminary visual of an idea for a design.
A sketch, typically including the top, front, and right primary views of an object that are drawn using orthographic projections.
Having the dimensions of height, width, and depth.
Drawings that shows how something works or is made are called ____________.
Artistic Drawing
Animation Drawing
Technical Drawing
Which are the three views most common in orthographic drawing?
Front, top and bottom
Front, top, side
Top, side and bottom
Front, back and top
What type of paper do you draw an isometric sketch on?
Graph paper
Plain paper
Isometric paper
Recognize the view for the given isometric figure.
Top view
Right side view
Left side view
Home view
Which is the top view of the solid?
Which of the figures represents the side view of the solid?
Three different views of a three-dimensional figure constructed by cubes is shown. Which figure could be represented by these views?
Which correctly shows the front view of this 3-dimensional figure?
Which type of line shows a feature that cannot be seen in a particular view?
center
hidden
projection
miter
Engineers, designers, and engineering
technologists need to know _______ and location of all features.
size
definition
orthographic
radius
Overall dimensions should include the three principle dimensions:
Length, height, sides
Height, width, depth
Front, side, top
Top, left, bottom
What is the purpose of sketching?
It can tell how and where the design will be used.
Sketching is appealing to people.
Sketching can provide details of an idea and lots of information all at once.
Color can be added to a sketch to show texture and appearance.
construction line
Lightly drawn line to guide drawing other lines and shapes.
A heavy solid line used on a drawing to represent the outline.
A heavy dashed line that represents an edge that is not directly visible.
A line that defines the center of arcs, circles, or symmetrical parts. A center line is half as thick as an object line.
object line
Lightly drawn line to guide drawing other lines and shapes.
Views that are intersecting or lying at right angles; perpendicular.
A heavy solid line used on a drawing to represent the outline.
A heavy solid line used on a drawing to represent the outline.
hidden line
A heavy solid line used on a drawing to represent the outline.
A heavy dashed line that represents an edge that is not directly visible.
Lightly drawn line to guide drawing other lines and shapes.
A line that defines the center of arcs, circles, or symmetrical parts. A center line is half as thick as an object line.
centerline
A line that defines the center of arcs, circles, or symmetrical parts. Is half as thick as an object line.
shows the location of a hole, cylinder, or other round features on a drawing as a pair of perpendicular lines that cross at the center of a feature.
A heavy dashed line that represents an edge that is not directly visible.
A heavy solid line used on a drawing to represent the outline.
A preliminary visual of an idea for a design. Most thumbnail sketches are not full size and have little detail. Their purpose is to help quickly explore possible alternative designs.
Multiview Sketch
Isometric Sketch
Thumbnail Sketch
Optional Sketch
A sketch in which an object’s parallel edges are drawn with parallel lines, typically at 30-degree angles to the horizontal baseline. There are no vanishing points, and three sides of the object can be seen simultaneously.
Thumbnail Sketch
Isometric Sketch
Multiview Sketch
Optional Sketch
A sketch, typically including the top, front, and right primary views of an object that are drawn using orthographic projections. An isometric sketch of the object is often included.
Isometric Sketch
Optional Sketch
Thumbnail Sketch
Multiview Sketch
___ lines are thick lines used to show visible edges of an object.
construction
hidden
object
center
The type of graph paper we use to draw multiview sketches is called ___
cartesian square
isometric square
mini square
thumbnail square
Look at the image in red. What view is it showing?
Top
Front
Right
Look at the image in red. What view is it showing?
Right
Front
Top
Look at the image in red. What view is it showing?
Top
Front
Right
Look at the image in red. What view is it showing?
Top
Front
Right
Look at the image in red. What view is it showing?
Top
Front
Right
These lines are used to show arcs, circles, or symmetrical parts of an object.
center
construction
hidden
object
These lines are used to show interior (inside) details and arevnot visible from a particular view of an object.
center
construction
hidden
object
These lines are lightly drawn lines that you can use to help you draw other lines properly. You can erase these lines after you sketch an object.
construction
center
hidden
object
The graph paper displayed is known as ___.
cartesian graph
isometric graph
multiview graph
optional graph
At what degree angle is an isometric sketch drawn on the horizontal base line?
90 degree
45 degree
30 degree
35 degree
Three different views of a three-dimensional figure constructed by cubes is shown. Which figure could be represented by these views?
Engineers, designers, and engineering
technologists need to know _______ and location of all features.
size
definition
orthographic
radius
Overall dimensions should include the three principle dimensions:
Length, height, sides
Height, width, depth
Front, side, top
Top, left, bottom
