WorksheetsRobotics WK15 Electric
Total questions: 58
Worksheet time: 48mins
stores electricity and then discharges it back into the circuit when there is a drop in voltage
capacitor
takes an electrical signal and converts in into vibrations to produce audible sounds
speaker
used to measure current in a circuit
ammeter
converts electrical energy into light and heat
lamp or bulb
converts electrical energy into mechanical energy
motor
light bulb
cell
battery
resistor
What is the following symbol represent?
Wire
Resistor
Battery
Switch
This symbol represents a ..........
Bulb
Resistor
Wire
L.E.D.
What symbol is this?
speaker
lamp
antenna
diode
More than one cell connected together, stores energy in a chemical form
bicell
battery
fuse
capacitor
Stores electricity and then discharges it back into the circuit when there is a drop in voltage
bicell
battery
fuse
capacitor
an electrical safety device that prevents too much current from flowing
battery
capacitor
fuse
ground
The reference point in an electrical circuit from which voltages are measured, in a one battery circuit, the negative terminal is also called this
battery
capacitor
fuse
ground
This converts electrical energy into light and heat, commonly used to check visually if a circuit is complete
battery
lamp or bulb
ground
motor
Light-emitting diode, allows electricity to flow in one direction (it has polarity)
Bulb or lamp
motor
LED
ground
What converts electrical energy into mechanical energy?
motor
generator
ground
lamp or bulb
What converts mechanical energy into electrical energy?
motor
generator
ground
lamp or bulb
What is an electromechanical transducer that allows the amount of opposition of the flow to change?
motor
Bulb or lamp
variable resistor
capacitor
What is used to measure voltage in a circuit?
kilometer
ammeter
voltmeter
iamb or dactyl
What opposes the flow of current, color bands are used to label the amount of resistance provided?
motor
reflector
resistor
dissentor
What is used to measure current in a circuit?
voltmeter
ammeter
arthrometer
generator
What is used to either complete or incomplete a circuit?
a generator
a switch
a resistor
a speaker
What takes an electrical signal and converts it into vibrations to produce audible sound?
bulb or lamp
motor
speaker
generator
What component with at least 3 terminals, can be used as an amplifier or switch?
transformer
transistor
transitioner
Togruta
What happens to the current in a series circuit?
The current stays the same
The current is added
The current is reduced
The current is split between the light bulbs
What is resistor?
Electrical component that is specially made to have a specific resistance
The measure of the difference in how much energy the electrons receive to move around at different points in a circuit
The flow of electrical charges
The movement or presence of electrons
Why is voltage is important?
Because it is the pressure that causes the electrons to move around in a circuit and make the current flow and make appliances work
To supply energy to be able to make the current flow in electric circuit and make appliances work
To control the resistance in the circuit
To reduce the current in the circuit
_________________ allow electricity to flow through easily.
conductors
construction
constrictors
______________ do not allow electricity to flow through easily.
insults
inside jokes
insulators
SI unit of current is
ampere
metre
ohm
volt
What is needed for current to flow?
light bulb
multimeter
resistance
voltage
SI unit of resistance is
ampere
metre
ohm
volt
(I X R)
Voltage divided by Resistance
(V / R)
Current
Power
Ohms
Watts
What is the resistance of a lightbulb that experiences 9 Volts and 3 amps of current?
1/3 ohms
3 ohms
27 ohms
9 ohms
39.0 mA is equivalent to
0.00039 A
0.0039 A
0.039 A
0.39 A
When referring to an electrical circuit diagram, what point is considered to be at zero voltage?
the switch
the circuit breaker
the resistor
the ground
A series circuit with 10 5ohm resistors will have a circuit resistance total of
500 ohms
555 ohms
50 ohms
55 ohms
