Which method of development is employed in case of prisms?

A regular cone is placed such that axis is perpendicular to H.P and the section plane is inclined to axis and parallel to one of the generators then the section will be

1. Consider steady laminar incompressible anti-symmetric fully developed viscous flow through a straight circular pipe of constant cross-sectional area at a Reynolds number of 5. The ratio of inertia force to viscous force on a fluid particle is___________

A ball bearing operating at a load F has 8000 hours of life. The life of the bearing, in hours, when the load is doubled to 2F is ______________

If a particular Fe-C alloy contains less than 0.83% carbon, it is called__________

Which of the following engineering materials is the most suitable candidate for hot chamber die casting ?

Which one of the following is a solid state joining process ?

Which type of motor is NOT used in axis or spindle drives of CNC machine tools ?

A calculator has accuracy up to 8 digits after decimal place. The value of , when evaluated using the calculator by trapezoidal method with 8 equal intervals, to 5 significant digits is

 As per common design practice, the three types of hydraulic turbines, in descending order of flow rate, are

Consider an ideal vapor compression refrigeration cycle. If the throttling process is replaced by an isentropic expansion process, keeping all the other processes unchanged, which one of the following statements is true for the modified cycle?

Water has a critical specific volume of 0.003155m³/kg. A closed and rigid steel tank of volume 0.025m³ contains a mixture of water and steam at 0.1MPa. The mass of the mixture is 10 kg. The tank is now slowly heated. The liquid level inside the tank

Consider an incompressible laminar boundary layer flow over a flat plate of length L, aligned with the direction of an incoming uniform free stream. If F is the ratio of the drag force on the front half of the plate to the drag force on the rear half, then

 Consider steady laminar incompressible anti-symmetric fully developed viscous flow through a straight circular pipe of constant cross-sectional area at a Reynolds number of 5. The ratio of inertia force to viscous force on a fluid particle is

$$\lim_{x\rightarrow0}$$ $$e^x$$ (1+x+ $$x^2$$ /2) / $$x^3$$

The number of linearly independent eigen vectors of $$\lceil2\ 1\rceil\lfloor0\ \ 2\rfloor$$  is _________________

In a counter flow heat exchanger, hot fluid enters at 60°C and cold fluid leaves at 30°C. Mass flow rate of the fluid is 1 kg/s and that of the cold fluid is 2 kg/s. Specific heat of the hot fluid is 10 kJ/kgK and that of the cold fluid is 5 kJ/kgK. The Log Mean Temperature Difference (LMTD) for the heat exchanger in °C is___________________

The stroke and bore of a four-stroke spark ignition engine are 250 mm and 200 mm respectively. The clearance volume is 0.001m³. If the specific heat ratio = 1.4, the air-standard cycle efficiency of the engine is________________

If $$a^2$$ + $$b^2$$ + $$c^2$$ = 1, Then 𝑎𝑏 + 𝑏𝑐 + 𝑎𝑐 lies in the interval

The relative humidity of ambient air at 300 K is 50% with a partial pressure of water vapour

equal to 𝑝𝑣. The saturation pressure of water at 300 K is 𝑝𝑠𝑎𝑡 . The correct relation for the air –

water mixture is

For an ideal gas with constant values of specific heats, for calculation of the specific enthalpy,_____

In actual air-conditioning applications for R-12 and R-22, and operating at a condenser

temperature of 40° C and an evaporator temperature of 5° C, the heat rejection factor is about

________________________

The value of $$\lim_{x\rightarrow0}$$ $$\frac{\left(1-\cos\ x\right)}{x^2}$$ is