Font size
S
M
L
XL
Worksheetssafety test
Total questions: 50
Worksheet time: 38mins
Name
Class
Date
1.
The two methods of securing material while using hand tools or drilling in the shop are:
a)
Vise
b)
Hands
c)
Glue
d)
Tape
e)
Clamp
2.
When using a power tool you must give it your ________ attention.
a)
Partial
b)
Complete
c)
Some
d)
Limited
3.
__________ is the process of removing a piece of material.
a)
Separating
b)
Forming
c)
Combining
d)
Breaking
4.
When using a scroll saw, the ONLY adjustment that a student is allowed to use is called:
a)
Blade Guard
b)
Blade Tension
c)
Build Plate
d)
Blade Speed
5.
The ______ is used to tighten the drill press before use.
a)
Wrench
b)
Clamp
c)
Chuck Key
d)
Screwdriver
6.
When using the disc sander, sand material only on the side that is moving ______ towards the table.
a)
Upwards
b)
Downwards
c)
Backwards
d)
Forwards
7.
When changing the blade on a scroll saw, you must first ______ machine.
a)
Unplug
b)
Start
c)
Test
d)
Wash
8.
To prevent drilling into the metal table, ______ a scrap piece of wood under your project.
a)
Glue
b)
Nail
c)
Clamp
d)
Tape
9.
When sanding on a disc sander, NEVER insert the material on the ______ side of the disc.
a)
Left
b)
Right
c)
Center
d)
Bottom
10.
What color represents danger or is the color of the emergency shut off button?
a)
Blue
b)
Yellow
c)
Red
d)
Orange
11.
When cutting a piece of wood on any machine you should always _________.
a)
Force the wood into the blade
b)
Push the material until the blade bends
c)
Let the blade determine the speed
d)
Keep your thumbs behind the blade
12.
When working on a disc sander __________
a)
Keep your hands away from the sandpaper
b)
No loose clothing
c)
Use material that is at least an inch thick
d)
All of the above
13.
When drilling a hole make sure to __________ the bit to clear the shavings.
a)
Withdraw
b)
Jam
c)
Force
d)
Ignore
14.
Before turning on any machine, make sure the blade is __________ with the stock.
a)
Touching
b)
Not in contact
c)
Pressing
d)
Turning
15.
When sanding on the disc sander, always sand on the side that is traveling down.
a)
True
b)
False
16.
You should always wait for the blade to stop completely before leaving a machine.
a)
True
b)
False
17.
Your fingers should be at least one inch away from the blade when cutting wood.
a)
True
b)
False
18.
While using a scroll saw, you should hold down the material to avoid chattering.
a)
True
b)
False
19.
When using the scroll saw, push the material through quickly.
a)
True
b)
False
20.
The teeth on the scroll saw blades are pointing down when cutting.
a)
True
b)
False
21.
Wait until the machine attains full speed before lowering it into the material.
a)
True
b)
False
22.
Make sure to remove all chips and shavings with your hands and fingers.
a)
True
b)
False
23.
When using a disc sander, always insert the wood on the down rotation of the disc.
a)
True
b)
False
24.
Always make sure to insert the chuck key before starting the drill press.
a)
True
b)
False
25.
To prevent breaking a drill press when drilling, you should back the bit straight out of the material while it is still powered on.
a)
True
b)
False
26.
If the blade on the scroll saw breaks, you should shut the machine off and notify the instructor.
a)
True
b)
False
27.
Remain at least one arm’s length away from anyone using a running machine.
a)
True
b)
False
28.
Eye protection is required when operating ANY tool in the shop.
a)
True
b)
False
29.
Eye protection is required when you are handling materials in the shop. (wood, plastic, nails, etc.)
a)
True
b)
False
30.
This should be put up or tied back when working. __________
a)
Clothing
b)
Hair
c)
Food
d)
Shoes
e)
Play
31.
These should completely cover your feet. _________
a)
Clothing
b)
Food
c)
Shoes
d)
Hair
e)
Play
32.
Horse _______ is not allowed in the shop area.
a)
Clothing
b)
Food
c)
Shoes
d)
Hair
e)
Play
33.
Hoodies are a form of loose ________ and not permitted in the shop.
a)
Clothing
b)
Food
c)
Shoes
d)
Hair
e)
Play
34.
There is absolutely none of this allowed in the shop. _______
a)
Clothing
b)
Food
c)
Shoes
d)
Hair
e)
Play
35.
When in doubt ask the ________________
a)
Brain
b)
Teacher
c)
Classmates
36.
The drill must be lined up with the _______________ in the table before drilling.
a)
Safety Key
b)
Thumbs
c)
Hole
d)
Scrap
37.
Keep your ____________ behind the piece of wood when cutting on the scroll saw.
a)
Thumbs
b)
Push Stick
c)
Clamp
d)
Material (Wood)
38.
When changing the bit in the drill press, you must first ____________ the power supply.
a)
Clamp
b)
Unplug
c)
Turn On
d)
Ignore
39.
To drill a hole forward, the drill moves in a _________________ direction.
a)
Clockwise
b)
Counter-clockwise
40.
Set the guide on the scroll saw so that it barely _____________ the wood.
a)
Touches
b)
Avoids
c)
Breaks
41.
When using the scroll saw, use a _____________ to remove material away from the blade.
a)
Dandibar
b)
Finger
c)
Push Stick
d)
Hammer
42.
To activate the fire extinguisher, hold it firmly and pull out the _____________.
a)
Chuck Key
b)
Safety Key
c)
Door Key
d)
Safety Goggles
43.
Use your ________ while working in the shop with your classmates.
a)
Chromebook
b)
Common Sense
c)
Smartphone
44.
When using the drill press, the larger the bit, the ____________ the speed.
a)
Slower
b)
Faster
45.
The band saw is primarily used to make _____________ cuts.
a)
Straight
b)
Curved
46.
The scroll saw is used to make _____ cuts.
a)
Straight
b)
Curved
c)
Both
47.
When using any machine, thicker material should be fed through _____________.
a)
Quickly
b)
Slowly
48.
What materials below are prohibited from being left on the tables in the shop? (Click all that apply)
a)
Tools
b)
Smartphones
c)
Chromebooks
d)
Building Materials
49.
The following tools are considered "hand" tools:
a)
Portable Drill
b)
Hammer
c)
Screwdriver
d)
Scroll Saw
e)
Drill Press
50.
What needs to be completed before we leave the shop each day? Choose all that apply.
a)
Tools need to be cleaned and turned off
b)
Stools need to be put on top of the tables
c)
Floor Swept
Reset
