WorksheetsQuestions (EASY)
Total questions: 30
Worksheet time: 15mins
What are mechanisms able to control?
Direction of motion
Speed of motion
Both speed and direction of motion
Neither speed nor direction of motion
How many types of levers do we have?
One
Two
Three
Four
What is a reciprocating movement?
It is a repetitive up-and-down or back-and-forth linear movement
It is a continuous linear movement
It is a transformation of rotary into linear movement
It is a repetitive clockwise-counterclockwise rotary movement
Which magnitude is measured in 'revolutions per minute' (rpm)?
Rotation speed
Linear speed
Teeth
Diameter
Movement in a circular motion.
Rotary
Oscillating
Linear
Reciprocating
If the driven gear has more teeth than the drive gear, what happens with the output speed?
It is higher than the input speed
It is lower than the input speed
It remains constant
There is not enough information
The input gear has 6 teeth. The output gear has 48 teeth. The gear ratio is ...
1:8
8:1
1:4
4:1
In a lever system ...
'd' is the distance from fulcrum to the resistance and 'r' is the distance from fulcrum to the force
'd' is the distance from fulcrum to both force and resistance
'r' is the distance from fulcrum to both force and resistance
'd' is the distance from fulcrum to the force and 'r' is the distance from fulcrum to the resistance
Which are the three basic types of pulleys?
Basic, mixed and compound
Simple, double and fixed
Fixed, movable and compound
Complex, simple and movable
The member of a pair of gears to which motion and power are transmitted by the other. The output gear.
Gear Ratio
Driven Gear
Drive Gear
All of these
The gear which transmits power and motion to the rest of the system. The input gear.
Gear Ratio
Driven Gear
Drive Gear
All of these
Which are three types of simple machines?
Gear, pulley and lever
Inclined plane, belt and lever
Wheel, gear and belt
Lever, pulley and inclined plane
What is the name of this mechanism?
Gear train
Chain and cogwheels
Belt and pulleys
Friction wheels
What is the name of this mechanism?
Pulley
Lever
Cam
Gear
The ratio of the speed of the driving member of a gear train to that of the driven member.
Gear Ratio
Driven Gear
Drive Gear
All of these
En un sistema de transmisión de movimiento, la rueda que transmite el movimiento se llama ...
Motriz
Conducida
Primera
Animadora
Si la velocidad de la rueda de salida es mayor que la velocidad de la rueda de entrada, el sistema se llama ... de velocidad.
Reductor
Multiplicador
Seguidor
Divisor
Si la velocidad de la rueda de salida es menor que la velocidad de la rueda de entrada, el sistema se llama ... de velocidad.
Reductor
Multiplicador
Seguidor
Divisor
En un sistema de transmisión de movimiento, la rueda que recibe el movimiento se llama ...
Motriz
Conducida
Secundaria
Animadora
La transmisión por engranajes se basa en el uso de ...
Poleas
Ruedas dentadas
Ruedas
Cremalleras
En un engranaje, "Z = 14" significa que ...
El engranaje puede mover un peso de 14 kg
El engranaje tiene 14 dientes
El engranaje gira a una velocidad de 14 rpm
Todas las respuestas son correctas
En un engranaje, "v = 12" significa que...
El engranaje puede mover un peso de 12 kg
El engranaje gira a una velocidad de 12 rpm
El diámetro del engranaje es de 12 mm
El engranaje tiene 12 dientes
Indica la respuesta INCORRECTA.
Utilizando engranajes se puede modificar la velocidad de rotación de una máquina
El engranaje que empuja se llama engranaje motor o motriz
El engranaje que recibe el movimiento se llama engranaje conducido o de salida
Si el engranaje de salida es más grande que el engranaje motor se aumenta la velocidad
Las levas ...
Siempre son circulares
Siempre son cuadradas
Pueden tener cualquier forma
Siempre son rectangulares
Las excéntricas tienen ...
Forma triangular
Forma irregular
Forma circular
Forma rectangular
¿A qué velocidad girará la rueda conducida si la motriz gira a 30 rpm y la relación de transmisión es 2:1?
60 rpm
30 rpm
15 rpm
Ninguna de las anteriores
Una rampa es un ejemplo de una máquina simple denominada ...
Polea
Palanca
Plano inclinado
Ninguna de las anteriores
El fulcro o punto de apoyo forma parte de la máquina simple llamada ...
Palanca
Polea
Plano inclinado
Rueda
Si el engranaje grande gira hacia la derecha, el pequeño girará ...
Hacia la derecha
Hacia la izquierda
Depende de la velocidad
Depende de los dientes
¿Qué ocurre con la velocidad de salida al emplear dos engranajes de igual tamaño?
Se mantiene constante
Aumenta
Disminuye
Ninguna es correcta
