What kind of PPE mandatory be wearied before using an impact wrench?

In electric cars what is the color of the high voltage cables?

Which type of fire extinguisher must be use at an Electrical equipment fire?

What does this sign mean?

Tools:

Why do this tool use in automotive workshop?

Tools:

What is the type of the device in the picture?

Tools:

What this tool is using for?

Tools:

What this tool is using for?

Tools:

What this special tool is using for?

Measurements:

The set-up shown is used to check:

Measurements:

What measurement is illustrated in the micrometer graphic?

Measurements:

What is the recommended minim tire trade depth?

Engine:

Label the highlighted component called out in the graphic.

Engine:

Technician A says that part X shown is used to rotate the valve spring. Technician B says that part X shown is used to correct installed spring height. Who is right?

Transmission:

Which shift that this schematic of Automatic transmission explains

Transmission:

A vehicle with an automatic transaxle and a properly tuned engine accelerates poorly from a stop. Acceleration is normal above 35 mph. Which of these could be the cause?

Drive Train:

What is the type of the drive joint on the picture?

Drive Train:

Which component of a transverse powertrain 4WD/AWD system sends transmission output torque to the driveshaft?

Brake:

What component is shown in the graphic?

Brake:

.The drag on a vehicle’s drum brakes increases after each application until they lock up bleeding the system restores normal operation for a short time; then drag increases until the brakes lock up again. Which of these could be the cause?

Steering:

While traveling at highway speed, a vibration is felt in the steering wheel and the front end of the vehicle vibrates up and down. Technician A says that a leaking power steering rack could be the cause. Technician B says that static out-of-balance of the front tires could be the cause. Who is right?

Steering:

During a wheel alignment, a technician finds the toe-out-on-turns (turning radius) to be incorrect. The cause could be a bent:

Suspension:

Ball joint wear is being checked in the suspension shown. Technician A says that the jack can be placed at X to perform the test. Technician B says that the jack can be placed at Y to perform the test. Who is right?

Suspension:

A vehicle pulls to the right during braking. Technician A says that a worn strut rod bushing could be the cause. Technician B says that a bent right wheel could be the cause. Who is right?

Wheel alignment:

A vehicle with the alignment readings shown has wear on the inside edge of the right front tire tread and pulls to the left. The cause could be incorrect:

Wheel alignment:

Any of these could cause tire wear if not within manufacturer’s specs EXCEPT:

Tires:

At the tire dimensions 205/55 R16 91 S what does the number 55 mean?

Tires:

At the rim dimensions 14x7 5/156 4+3 what does the number 5 mean?

On-Board electric:

In the charging system shown, with the engine running, the digital multi-meter (DMM) will display:

On-Board electric:

The bulb in the circuit shown does not light. To find the actual voltage at the bulb, the technician should touch the positive probe of the voltmeter to:

Air conditioning:

There is a problem in the A/C Freon circuit after check the circuit pressure it gave this reading in the picture, what does the pressure gauge reading mean?

Air conditioning:

Technician A says that evacuating an A/C system will remove air and moisture from the system. Technician B says that evacuating an A/C system will remove dirt particles from the system. Who is right?

Scan tool:

In OBD2 System what is the global diagnosis socket for all cars todays?

Scan tool:

When you use a scan tool and need to check the response of the electric throttle valve which step do you use?

After-sales:

Who is the responsible for customer reception?

After-sales:

What will you do if you get a problem in a customer car didn’t mention on the job order?