Font size
WorksheetsSafetyfirst May'23 Quiz
Total questions: 20
Worksheet time: 5mins
Which Standard is covering Working at Height?
04
11
23
13
What is FIRST LSR fundamental to protect yourself against fall when working at height?
Tie off 100% to approved anchor points while outside of protected area
Inspect fall protection equipment before use
Secure tools and work materials to prevent dropped objects
Ask your co-worker to watch at you all the time from ground level
How many Life Saving Rules exists?
21
12
8
9
What is SECOND LSR fundamental to protect yourself against fall when working at height?
Tie off 100% to approved anchor points while outside of protected area
Inspect fall protection equipment before use
Secure tools and work materials to prevent dropped objects
Take as much equipment with you as possible, not to go down for it again
What % injuries SLB had from 2014-2018 related to working at height?
10%
11%
12%
13%
What is THIRD LSR fundamental to protect yourself against fall when working at height?
Inspect fall protection equipment before use
Secure tools and work materials to prevent dropped objects
Tie off 100% to approved anchor points while outside of protected area
Put headphones on, not to be distracted by others
If work at height cannot be eliminated, it's ok to proceed without risk assessment provided line manager gives a green light.
True
False
For Working at height, which are valid statements?
(Pick multiple options as applicable):
Appropriately supervised
Properly planned and risk assessed
Not carried out in dangerous weather conditions
Push forward to next day
Which of the below options falls under Work at Height definition?
(Pick single or multiple choices as applicable)
Work above ground/floor level
Where you could fall from an edge, through an opening or fragile surface
Where you could fall from ground level into an opening floor or hole in the ground
Where you could fall while walking
What is service life of body harness and lanyards?
1 year
2 years
5 years
10 years
What is inspection period of body harness?
12 months
3 months
4 months
6 months
Fall protection systems shall be used when working outside an enclosed area where there is the risk of a fall over from height of (Drag the correct answer to the box): (a)
Which action should be immediately taken if fall protection is not 100% safe?
Report HSE RIR with appropriate action item after the job
Make a photo and share during next safety meeting
Stop the job
Ask your colleague to supervise your operation in case anything goes wrong
Who should be DROPS level-1 certified?
Banksman, Signalman, Slinger only
Wellsite supervisor only
All perssonel
Forklift operators only
What is not considered to be work at height?
A stairway in a permanent workplace, although a form of access
Activity at 1.8 m above ground level with no protection equipment/ system
Potential fall from ground level into an opening in the floor or hole in the ground
When working above ground level or person can fall from an edge
Which Life Saving Rule was presented last month (Apr) for RP ACE Safetyfirst Call?
Line of fire
Energy Isolation
Mechanical Lifting
Bypassing safety controls
Which of the below are not considered as "Working at height"?
(Pick multiple choices as applicable)
Where you could fall from ground level into an opening floor or hole in the ground
A slip or a trip on the level
Walking up or down staircase in a building or permanent workplace
Where you could fall from an edge, through an opening or fragile surface
Fill in the Hierarchy of controls needed for working at height:
(Drag the option to the correct box)
What "MEWP" stand for in terms of Work at Height?
Mobile Electrical Welding Pad
Memory Electrical Weak Point
Main Equipment Work Pad
Mobile Elevated Work Platform
What is maximum recommended suspension time for individual in full body harness?
20 mins
10 mins
15 mins
30 mins
