WorksheetsEnd of Course Review
Total questions: 49
Worksheet time: 25mins
The last step in the design process is to _
Make improvements before releasing the product
mass market it
make improvements
produce it
In AutoCAD, this is a _.
tub
dimension
window
door
In AutoCAD, this is a _.
shower
tub
door
window
In AutoCAD, this is a _.
window
door
shower
sink
In AutoCAD, to rotate this chair to the dashed lines, type _ into the rotate command.
-180
180
90
-90
In AutoCAD, to rotate this chair to the dashed lines, type _ into the rotate command.
-90
90
180
-180
In AutoCAD, rotating COUNTERCLOCKWISE is a _ number.
negative
positive
z
undo
In AutoCAD, rotating CLOCKWISE uses a _ number.
positive
negative
prime
imaginary
Which is a live load?
wind
wall
floor
roof
Which is a dead load?
snow
movable equipment
wall
car
A _ load will not change.
stationary
angry
dead
live
A _ load will change over time.
dead
mobile
fixed
live
Examples of dead loads are _.
columns, roofs, walls, trusses
columns, cars, trusses, plywood
furniture, floors, wind, roofs
earthquakes, snowstorms, tornadoes, hurricanes
Examples of live loads are _.
movable appliances, people, walls, wind
roofs, walls, stairs, trusses
cars, furniture, wind, movable appliances
cars, people, walls, ceilings
The third step in the design process is to _.
brainstorm and conceptualize
research the problem
test market the solution
evaluate the solution
The second step in the design process is to _.
research the problem in depth
research the problem a little bit
review the problem
create a prototype
The first step in the design process is to _.
identify the problem
conceptualize the answer
research the problem
review the problem
To know how much flooring you need, you can calculate the floor _ in square feet.
perimeter
area
depth
materials
Square feet is the same as _.
density
weight
area
perimeter
3/4" to decimals is _.
0.75"
0.5"
0.25"
0.35"
Kitchen base (lower) cabinets are drawn at _ deep.
18"
12"
36"
24"
Doors must be _ wide to accommodate a wheelchair.
3'-0"
2'-4"
3'-6"
2'-9"
A square can be drawn in AutoCAD using which tools? [select MORE THAN ONE]
rectangle tool
line tool
polyline tool
dimension tool
You can find the total square feet of a room by _.
adding the length of all walls
multiplying the total width and the total length
multiplying every dimension together
multiplying some of the length and some of the widths
You can _ the square feet of each floor to get the total square feet of the house.
multiply
add
subtract
divide
If the first floor is 100 sqft, and the second floor is 200 sqft, the total square feet is _.
100+200
100x200
100-200
100/200
Architectural style is visible in a building's _.
location, date of construction, materials
building techniques, appearance, materials
floorplan, site plan, elevation
date of construction, building techniques, and center of gravity
A _ shows the relationship between two numbers.
addition
relativity
ratio
division
Windows, doors, walls, toilets, sinks, and cabinets are shown on a _.
floor plan
site plan
plot plan
section
Existing roads, sidewalks, landscaping, and surrounding buildings are shown on a _.
site plan
floor plan
plot plan
section
Square feet =
length x width
length + width
length + length + width + width
length / width
A T-square is used to _.
draw perfect squares
cut materials
measure distances
draw straight lines
Convert 30.5" to a fraction.
30 1/2"
30 1/5"
31
30 5/1
Convert 1/2" to decimal.
0.2"
0.75"
0.5"
0.25"
Convert 1/4" to a decimal.
0.5"
0.4"
0.25"
1.4"
Convert 0.75" to a fraction.
1/4"
2/4"
3/4"
4/4"
Convert 0.5" to a fraction.
1/4"
1/3"
1/2"
3/4"
To find the total width, _ all of the dimensions on that side.
add
subtract
multiply
divide
The total width is _.
2+2+2+2+4
2x2x2x2
2+2+2+2
2+4
The total width is _.
4+2
4+4+4+2
4+3+2+1
4x2
Julien is making a divider for his drawer. The compartments are 2", 2", 3", and 4". How wide is the diveder?
2+3+4
2+2+3+4
2+2-3-4
2+4
Compare live loads with dead loads.
snow, wind, cars vs. people, movable equipment, appliances
movable equipment, cars, appliances vs. walls, floors, roofs
walls, floors, roofs vs. movable equipment, cars, appliances
floors, walls, roofs vs. trusses, stairs, cars
This is a _.
scale
T-square
square
X-acto knife
The total length is _.
12+6
12
6
12-6
The total width is _.
4
414
4+14
14-4
A bathroom is 10'x 12'. How many square feet is it?
1020 sqft
22 sqft
120 sqft
150 sqft
A bathroom is 6'x8'. How many square feet is it?
68 sqft
14 sqft
48 sqft
86 sqft
A _ line shows there is something above or below on a floor plan.
indented
solid
dashed
bold
A ratio _ numbers.
divides
highlights
compares
adds
