Font size
WorksheetsLV13 short revision
Total questions: 17
Worksheet time: 16mins
ATF stands for ...
(a)
DSG stands for ...
(a)
CVT stands for (a)
CBW stands for
(a)
DMF stands for ...
(a)
Name three parts that make up a torque converter
The torque converter impeller is connected and driven by the..
Input shaft
Flywheel
The torque converter turbine drives the ....
flywheel
impeller
input shaft
stator
What does the torque converter stall test check?
State the typical resistance of a transmission shift solenoid..
2-20 ohms
5-50 ohms
200-500 ohms
50-100 ohms
An automatic gearbox requires new bearings and clutch bands. The gearbox must be repaired in a dust free environment?
True or false
True
False
Extreme heat is generated by which component within the transmission that is detrimental to ATF life?
Fluid pick up and filter
Fluid pump
Torque converter
Planetary gear-set
When engaging gear there is noticeable clutch judder. ONE possible cause is:
Badly worn engine mountings
Clutch cable worn
Centre plate sticking on input shaft splines
Broken clutch diaphragm spring
A vehicle fitted with manual transmission crashes when engaging 2nd gear. The most likely cause is:
Spigot bearing partially seized on input shaft
Defective gear interlocking device
Worn synchromesh baulk ring
Seized clutch release bearing
The torque converter used in a CVT is totally different to one used in an automatic transmission
True
False
In a typical vehicle CVT, Which component alters the gear ratio ?
Solenoids
Forward/reverse assembly
Belt and pulley assembly
Valve body
In passenger vehicles, a rubber belt transmits the drive in a CVT.
True
False
