NEW
Font size
WorksheetsDesign and Technology QUIZ
Total questions: 30
Worksheet time: 23mins
Which of the following is/are a function of structures?
X: Protect something
Y: Support a load
Z: Span between points
X
X and Z only
Y and Z only
X, Y and Z
Which of the following is NOT an electrical output component?
Diode
Light bulb
Light emitting diode
Motor
Which of the following describes a shear force?
Carrying a stack of books with two hands.
Cutting a piece of paper with a scissor
Kicking a soccer ball with one leg.
Stretching a rubber band.
Which of these statements is a correct and safe practice when working in the
workshop?
Use blunt tools to prevent injuries.
Wear an apron only when you are using the machines.
Bags should not be brought into a workshop as people can trip over them.
Wear gloves when using all machines.
Which of these is an electrical insulator?
Plastic spoon
Copper tape
Metal chopstick
Sea water
Which of the following is an advantage of using LED over light bulb?
Easy to remove and replace
Level of brightness
Shorter life span
Energy efficiency
When making the acrylic photo frame, the strip heater is used to
bend the edges.
cut the edges.
clean the edges.
shape the edges.
The figure below shows a technical drawing commonly used in working drawing.
Isometric Drawing
Oblique Drawing
Oblique Drawing
Orthographic Drawing
Which of these statements is true when using the scroll saw in the workshop?
Always use your hands to clear any waste material stuck in the scroll saw.
Internal slots cannot be cut by a scroll saw.
The scroll saw only can cut straight edges and not curved edges.
When cutting, your fingers should stay clear of the moving blade.
The figure below shows a machine used to polish the edges of acrylic. Name the machine.
Buffing machine
Drilling machine
Scroll saw
Strip heater
The figure shows a workshop tool used to bend aluminum sheet. Name the tool.
Metal bender
U-shape bar
Folding bar
Metal bar
Which of the following is best used to join two pieces of acrylic together?
Chloroform
Super glue
PVA glue
Special solvent
Name the switch.
Slide switch
Tilt switch
Toggle switch
Rocker switch
Which of the following reason(s) can be the intention of making a mock up?
To check if parts fit well together.
To provide a visual impression of an idea.
To evaluate the proportions of the design.
All of the above.
Which of the following is correct when using the bench drilling machine?
Support the work piece with two hands.
Stand on the yellow line.
Wear safety googles to protect our eyes.
Wear gloves so that our hands will not get entangled in the machine.
Which of the following is an example of a natural frame structure?
Bridge
Branches of tree
Ladder
Bicycle
Which of these statements is correct when using the soldering iron in the workshop?
The soldering iron should be left on the table when not in use.
Use your finger to test that the soldering iron is working.
The metal parts to be joined should be heated up first, not the solder.
The tip of the soldering iron is cleaned with a cloth when needed.
Which of the following statement is correct?
A structure must collapse when in use.
Compression force is an example of an external force acting on an object.
An egg shell is an example of a man-made shell structure.
A structure can be natural or man-made.
A resistor ………………. the current flowing in an electric circuit.
multiples
stops
limits
monitors
A design brief should include the following information except
the environment where the product will be used.
the target user.
the design problem.
the main function of the product.
Which of the following statement(s) describe(s) the purpose of a Gantt chart?
X: helps you plan the activities that need to be completed
Y: helps you to monitor whether your project is on schedule
Z: helps you to plan the allocation of resources needed for the project
X
X and Z only
Y and Z only
X, Y and Z
Which of the following is an example of a man-made frame structure?
branches of tree
bicycle
spider web
skeleton
Electric current is measured in
Amperes
Watts
Volts
Ohms
Which of the following tool was likely used to design the product shown.
Shape borrowing
Random lines
SCAMPER
Lines and Shapes
Name the name of the tool that is used to cut big holes in wood.
Twist drill bit
Hole saw
Forstner bit
Circle cutter
Which of the following best describes Acrylic (plastic) as a material for making
products?
A - It is available in many colours.
B - It can be shaped using heat.
C - It is waterproof.
D - It will not break when drop to the ground.
A, B, D
A, B, C
A, C, D
B, C, D
What is the type of force applied?
Compression force
Torsion force
Tension force
Shear force
Name the abrasive paper used to finish metal.
Emery cloth
Glass paper
Wet and dry abrasive paper
tracing paper
Name the electrical component.
Resistor
Light emitting diode
Dry cell
Switch
LEDs are sometimes connected parallel in a circuit. Explain why?
Parallel circuit uses less wires.
Parallel circuit looks neater.
If one LED fuses, the rest will not light up.
If one LED fuses, the rest will still light up.
