Is the manipulation of metal materials to create art, tools, jewelry, and other objects.

Is the process of removing precise amounts of material from a greater piece. A milling machine rotates a cutting tool and brings the cutting tool into contact with a work piece.

involves applying the sharp point of a cutting tool to a metal surface as it’s rapidly spun.

requires a drill bit applied directly to metal, then the typical combination of force and rotation that you’d see when a screw was being drilled into a wall.

Has an abrasive wheel that turns while making contact with the metal, wearing the surface down and helping separate it.

Is a fabrication process that joins materials through pressure and heat.

Joining metals by melting a filler metal on top of the metals being joined to make a reliable electrical bridge.

They are ideal for joining pieces that are lightweight and require high strength.

Is one of the oldest metalworking processes used to form and shape metal. The metal is heated in the forge, then hammered and bent into the desired shape.

Is a process that involves the continuous bending of a long strip of sheet metal through a roll forming mill at room temperature

is a metal forming process in which metal stock is passed through a rolling mill to reduce the thickness or to make the thickness uniform.

Is a process in which a molten metal is poured into a mold that has been created from a wax model.

Is an automated and fast process that forces molten metal into a mold under high pressure.

The mold is created by combining sand with a bonding agent, such as clay, and is gated. Molten metal is flowed into the mold to create a solid object. Sand casting is the most common metal casting method, and is relatively inexpensive.

It is used for measuring straight rule lines, because of its straight edge. It can also be used as a guideline when laying out lines and also for cutting.

It is a device for testing or laying out right angles, usually consisting of a metal blade fixed at right angles to a handle.

It is a tool commonly used in metalworking to measure and calculate 45-and 90-degree angles. Has a head which can be moved along the beam.

It is a type of protractor that is circular and has a pivoted arm used to measure the angle of objects.

It is an instrument used for measurements of dimensions such as diameters, thicknesses, and lengths of solid bodies.

It is a precision measuring instrument used to measure the inside, outside diameter, as well as depth of hole and slot.

It is used for dividing distances into a number of equal parts.

It is used for measuring the diameter of wire or the thickness of the sheet metal

It is a tape or strip of flexible metal, marked in inches, feet, meters, and others, that is used in measuring short and long distances.

A type of hand tool designed specifically for cutting through materials such as plastic, steel, and other metals

These are steel instruments with a hardened and tapered surface of cutting ridges or teeth for various tasks such as cleaning the welded joints, cleaning the steel surfaces, and sharpening blades.

For finishing, shaping and deburring a wide range of materials.

Its half-round shape allows deburring inside curved spaces, round holes, and corners.

It is used for rubbing or finishing keyhole of small diameter.

Is a tool used for carving materials, striking them with the aid of a hammer or mallet.

Are hand tools designed for cutting thin sheets of metal, particularly sheet metal or thin metal plates.

This is used to make an indent or a hole in a hard surface. These are used for permanent markings on the surface of metals

It is used to drive nails into an object. Different hammers are used for work with wood, metal and

Is a tool primarily used for driving nails into, or extracting nails from, some other object.

This is used to drive chisels or to tap wood joints together, where a metal-faced hammer would cause damage or bruising.

The peening face is useful for rounding off edges of metal pins and fasteners, such as rivets.

Is a hand tool specifically designed for turning screws. It has a handle and a shaft, usually made of metal, with a tip that fits into the head of a screw.

It is used for gripping, turning, tightening, and loosening things like pipes, pipe fittings, nuts and bolts.

Have ends designed to turn hex and square bolts.

Tightens/loosens nuts and bolts.

Used for tightening and loosening hexagonal bolts and other compatible fasteners.

Use on different sizes of nuts and bolts.

To grip and rotate plumbing pipes