WorksheetsPMI 2024 week 6
Total questions: 20
Worksheet time: 10mins
Most Air Governors are set to limit the air system at:
115 psi
105 psi
125 psi
130 psi
135 psi
The ____ _____ is mounted at the bottom of the air dryer, and receives air from the governor to relieve pressure from the air system.
Sync Valve
Holding Valve
Wet Valve
Heart Valve
Purge Valve
This tool is for adjusting the:
Slack Adjuster
Chamber Lock Bolt
Drum Mount
Chamber Clevise
S-Cam
This is the:
Cajun Bolt
Chamber Lock Bolt
Caging Bolt
Safety Lock
Parking Lockout Bolt
This is the ____ ____ the mechanic is wrenching on:
Slack Adjuster
S-Cam
Locking Clevis
Chamber Carrier
Pedal Linkage Interface
True or False: Brake Chamber Diaphragms can be replaced
True
False
True or False: Front Brake Chambers have parking brake capabilities.
True
False
When "Caging" a brake chamber, you are :
Overriding the Slack Adjuster.
Overriding The Parking Brake Default.
Locking the wheel, Not allowing free movement.
Blocking air from coming into the brake chamber.
Locking the Brake Drums onto the Brake Chamber
Air Dryer Purge Valves can be re-built:
True
False
What is the steering type shown?
Rack & Pinion
Worm & Pin
Gear & Pulley
Fifth wheel steering
The steering system component shown in the figure is a/an
Power-steering pump
Steering fluid reservoir
Flow control valve
Power steering hoses
The steering system component shown in the figure is a/an
Power cylinder
Steering fluid reservoir
Flow control valve
Power-steering pump
What three parts are not used on the rack and pinion system (bottom) that are used on linkage style system (top)?
Idler Arm, Pitman Arm, Center Link
Tie Rod, Rack and Pinion, Steering Knuckle
Steering Knuckle, Tie Rod, Pitman Arm
Idler Arm, Center Link, Tie Rod
