NEW
Font size
WorksheetsCannock EIC Quiz
Total questions: 17
Worksheet time: 51mins
Under what condition are you permitted to photocopy or electronically manipulate the IET forms according to the document?
For any purpose as long as it is free of charge.
Solely in connection with your electrical contracting business.
For the purpose of resale.
Without any conditions as long as the IET logo is not reproduced.
How long does the permission to use the IET forms last before it needs to be considered for renewal?
After five years from the date hereof.
After seven years from the date hereof.
After ten years from the date hereof.
It does not expire and does not need renewal.
Which of the following is NOT included in the Electrical Installation Certificate ?
Details of client
Schedule of Circuit Details
Schedule of Test Results
Electrical Maintenance Log
What is the purpose of the 'Schedule of Inspections' section in the Electrical Installation Certificate?
To record the maximum demand of the installation
To list the names and addresses of the signatories
To document the inspection outcomes of various parts of the installation
To provide the details of the installation earthing
Which of the following is NOT a type of earthing arrangement listed in the Electrical Installation Certificate?
TN-C
TT
IT
TN-B
What information is required under the 'Main switch / Switch-fuse / Circuit-breaker / RCD' section?
Location, BS (EN) number, and number of poles
Current rating, fuse/device rating or setting, and voltage rating
Type of earthing electrode and electrode resistance to Earth
Maximum demand in kVA/Amps and details of installation Earth Electrode
Which of the following is a characteristic that may be included under 'Nature of Supply Parameters' in the Electrical Installation Certificate?
Prospective fault current, Ipf
Rated residual operating current
Measured operating time
Connection / continuity verified
What is the Electrical Installation Certificate NOT to be used for?
Initial certification of a new installation
Periodic inspection and testing
Replacement of a consumer unit/distribution board
Certifying multiple additions or alterations to the existing installation
Who should retain a duplicate of the original Electrical Installation Certificate?
The person conducting the inspection
The person ordering the work
The designer of the installation
The installer of the electrical work
What must be completed to validate the Electrical Installation Certificate?
Schedule(s) of Circuit Details and Test Results
A single signature from the lead electrician
Payment for the electrical work done
A periodic inspection report
Who is authorized to sign the Electrical Installation Certificate?
Only the person who designed the installation
Only the person who installed the electrical work
Persons authorized by the company executing the work of design, construction, inspection, and testing
Any certified electrician
What should the maximum prospective value of fault current (I) recorded be?
The minimum value of short-circuit current
The average value of short-circuit current
The greater of either the prospective value of short-circuit current or the prospective value of earth fault current
The lesser of either the prospective value of short-circuit current or the prospective value of earth fault current
What should be done if a residual current device (RCD) does not switch off the supply when the test button is pressed?
Continue using the device as normal.
Send HSE a strongly worded email
Replace the device immediately.
Ignore the issue as it is not significant.
How often should an arc fault detection device containing a built in test function (AFDD) be tested?
Weekly
Monthly
Six-monthly
Annually
What should be checked to confirm the operational condition of a surge protective device (SPD)?
The device's color
The status indicator
The device's size
The brand name
What should be present at all points of isolation of all sources of supply when the installation includes alternative or additional sources of supply?
Instruction manuals
Warning notices
Operational guides
Maintenance schedules
According to the document, what is the purpose of the Electrical Installation Certificate?
To confirm the electrical installation work has been designed, constructed, inspected, and tested in accordance with BS 7671.
To provide a detailed guide on how to use electrical appliances.
To serve as a warranty for electrical work done.
To list the names of the electricians who performed the work.
