NEW
Font size
WorksheetsBSI H Graphic Communication
Total questions: 42
Worksheet time: 21mins
What are preliminary drawings used for in the design process?
To provide precise information about the manufacture of products
To highlight features, materials, or clarify ideas through quick sketches and annotations
To bring people's attention to specific features of a product
To provide dimensioned orthographics and exploded views
Which type of graphics generally includes dimensioned orthographics, exploded views, and assembly instructions?
Preliminary Graphics
Production Graphics
Promotional Graphics
Planning Charts
What is the purpose of promotional graphics?
To provide quick sketches for concept development
To provide detailed instructions for product assembly
To attract attention or highlight specific aspects of a product for promotion
To provide precise manufacturing details
What should be done at all stages of the PPP design process?
Ideas should be kept unchanged
Decisions and ideas should be evaluated and improved if possible
Only promotional graphics should be considered
Preliminary drawings should be discarded
What type of drawings might include camera-ready proofs and cutting patterns?
Preliminary Graphics
Production Graphics
Promotional Graphics
Planning Charts
In which field might you find planning charts, site plans, and survey drawings as part of the graphics used?
Consumer
Engineering
Construction
Promotional
What are the two main groups of drawings mentioned in the text?
Isometric and Oblique
Orthographic and Pictorial
Axonometric and Perspective
Schematic and Diagrammatic
Orthographic drawings are commonly used for what purpose?
Artistic illustrations
Production drawings
Conceptual sketches
Landscape design
What symbol is used to easily recognize orthographic drawings?
A square symbol
A circle symbol
The third angle symbol
The first angle symbol
What does an auxiliary view show?
The object from a non-standard angle showing only the true dimensions
The object from a standard angle showing the true dimensions
The object from a non-standard angle showing the whole object but not just the true dimensions
The object from a standard angle showing the whole object and the true dimensions
What is the purpose of surface developments (nets) in orthographic drawings?
To show the object in a 3D perspective
To show how the development folds when an object is to be folded up to create a hollow form
To provide a detailed view of the object's surface texture
To illustrate the object's color scheme
What is the Ellipse method also known as?
Concentric square method
Concentric triangle method
Concentric circle method
Concentric rectangle method
What does tangency in drawing techniques use to find centers and points?
Circumference calculation
Area approximation
Triangulation
Perpendicular bisectors
Which of the following is NOT a type of technical detail view listed in the document?
Dimensioned Orthographic & pictorials
Exploded (isometric, oblique)
Enlarged views
Symmetrical sections
What is the purpose of technical detail views according to the document?
To provide information for marketing purposes
To give information and additional viewpoints for construction and assembly
To offer a historical perspective on engineering design
To display artistic interpretations of mechanical components
Which of the following is mentioned as a feature that can be shown in technical detail views?
Color coding of components
Degree of motion/range of movement
Price listings of parts
Manufacturer's logo
What is the main advantage of an oblique view in pictorial drawings?
It provides a realistic view of an object.
It allows for easy drawing of circles before extending the shape to give depth.
It shows the inside arrangement of rooms.
It gives a very clear view of how a component will look.
What type of pictorial view is often used in engineering to give a very clear view of how a component or object will look?
Perspective
Oblique
Planometric
Isometric
What is the internal angle of planometric drawings?
30°
45°
60°
90°
What type of drawings are used to show how a building will look from the front, either side, or the back?
Pictorial Views
Promotional Drawings
Elevations
Planometric Views
What is the purpose of promotional drawings in the context of location/building drawings?
To show the inside arrangement of rooms.
To provide a clear view of a component's assembly.
To advertise and promote a property.
To give a realistic view of an object at a 45° angle.
What does a sectional view of a building show?
The exterior design of the building
The materials used to build the building
The cost estimates for the building construction
The landscaping around the building
What are the preferred scales for floor plans?
1:200 or 1:500
1:50 or 1:100
1:1250 or 1:2500
1:1000 or 1:2000
What is the normal scale used for a block plan?
1:50 or 1:100
1:200 or 1:500
1:1250 or 1:2500
1:1000 or 1:2000
What does a site location drawing or block plan typically show?
The interior design of a building
The electrical wiring of a building
The roads, outlines of buildings, site/plot boundaries, and land contour lines
The furniture layout of a building
What is the purpose of having several sectional views in building plans (blueprints)?
To provide a 3D visualization of the building
To show the color scheme of the building
To aid the architect or civil engineer in construction
To display the building's energy efficiency
What is the purpose of a site plan?
To show the layout of rooms inside a building
To indicate the position of doors and windows
To show one or more buildings within their own site boundary
To display advanced BSI layout and engineering symbols
What elements are usually indicated on a site plan?
Plumbing and electrical wiring
Rooms layout and furniture arrangement
Waste pipe runs, manholes, and trees
Position of doors, windows, and fittings
What does a floor plan typically show?
The boundaries and outlines of buildings
The layout of rooms inside the building and the position of doors, windows, and important fittings
The scale and north point of a plot
Advanced BSI layout and engineering symbols
What do architects' drawings usually have to show different types of fixtures and fittings?
Scale indicators
Site numbers
Several layers
BSI symbols
What additional information is provided in the National 4/5 notes according to the text?
Site plan examples
Floor plan examples
Advanced BSI layout and engineering symbols
Basic room layouts
What symbol represents a switch with a pilot light in construction drawings according to the Scottish Qualifications Authority document?
A circle with a horizontal line through it
A circle with a small circle inside it on the lower right
A circle with a diagonal line through it
A circle with a vertical line through it
Which symbol is used to denote plywood sheet in construction drawings?
A rectangle filled with a grid of dots
A rectangle with diagonal lines through it
A rectangle with horizontal lines
A rectangle with a zigzag pattern
How is a water heater with wiring depicted in construction drawings?
A rectangle with an 'X' through it
A circle with two lines underneath
A rectangle with a wavy line on top
A circle with wavy lines on either side
What does the symbol of a circle with a horizontal axis represent in the landscape section of construction drawings?
An existing tree
A tree to be removed
A proposed tree
A hinged door on plans
In the section for building components, what does the symbol that looks like a rectangle with a triangle on top represent?
A window in horizontal/vertical section/cut
A fixed window
A hinged window at side
A hinged window at top
What is the conventional representation for a flat feature on a shaft as shown in Figure 36?
A circle with a line through it
Two concentric circles
A hexagon with a line through it
A circle with two lines crossing at the center
According to Figure 37, which pattern represents a diamond knurling?
Straight lines at 45 degrees
Diagonal lines drawn at about 30° to center line
A series of small circles
A grid pattern
What does Figure 42 illustrate as a general convention in technical drawings?
Convention for a fixed pulley
Convention for a rolling bearing
Convention for a gear
Convention for a rivet
How is a linear dimension toleranced by specifying limits of size directly as per Figure 86?
By providing a single measurement
By providing an upper and lower limit
By providing a percentage tolerance
By providing a radius measurement
What does Figure 87 demonstrate about tolerancing angular dimensions?
A fixed angle with no tolerance
An angle with a tolerance of ±1°
An angle with a tolerance of ±2°
An angle with a tolerance of ±0.1°
What is indicated by the general note "ALL OVER" as shown in Figure 90?
Machining is required on one surface only
Machining is required on all surfaces
No machining is required
Machining is required on alternating surfaces
