WorksheetsLong Test
Total questions: 50
Worksheet time: 25mins
Name
Class
Date
1.
Analog multimeters typically are not as accurate as digital meters when used as a voltmeter. However, analog multimeters are great for detecting fast voltage changes because you can watch the needle moving over the scale. What is wrong with the statement?
a)
You can watch the needle moving over the scale.
b)
Not as accurate as digital meters when used as a voltmeter.
c)
Analog multimeters are great for detecting fast voltage changes.
d)
Analog multimeters typically are not as accurate as digital meters.
2.
Every maintenance job order or work order has a lifecycle with three main phases, EXCEPT for one:
a)
Completion
b)
Creation
c)
Recording
d)
Reworking
3.
Below are the basic functions of Computer Repair Job Order, EXCEPT:
a)
Creates a record of the job for accountability and future reference.
b)
Authorized the job, the scope, who it is assigned to, and what is expected.
c)
Organizes jobs and tasks to ensure work is done in the order it was received.
d)
Provides a detailed description of any issues/problems with the computer, what exactly needs to be done to fix it, and other pertinent information.
4.
The following steps are getting familiar with the multimeter, which is the first step?
a)
Locate the test leads.
b)
Observe the meter indication.
c)
Find the selector switch, or knob.
d)
Locate the dial of your multimeter.
5.
The following steps are getting familiar with the multimeter, which is the fifth step?
a)
Locate the test leads.
b)
Find the zero-adjustment knob.
c)
Find the battery and fuse compartment.
d)
Locate the openings in the case where you’ll insert the test leads.
6.
The following steps are getting familiar with the multimeter, EXCEPT:
a)
Locate the test leads.
b)
Observe the meter indication.
c)
Find the selector switch, or knob.
d)
Find the battery and fuse compartment.
7.
Which part of multimeter indicates the values read from scale?
a)
Pointer or Needle
b)
Range
c)
Scale
d)
Test Probes
8.
Digital multimeters typically are better than analog in the voltmeter function, due to the Lower resistance of digital. But for most users, the primary advantage of digital testers is the easy-to-read and highly accurate digital readout. What is wrong with the statement?
a)
Highly accurate digital readout.
b)
Due to the Lower resistance of digital.
c)
The primary advantage of digital testers is the easy-to-read.
d)
Digital multimeters typically are better than analog in the voltmeter function.
9.
The following are the steps in measuring voltage. Choose the right sequence:
I. Try not to hold both.
II. Locate the voltage scales.
III. Test a common electrical outlet.
IV. Set the meter for the highest range provided for AC Volts.
a)
I, II, III and IV
b)
II, IV, III and I
c)
IV, II, III and I
d)
IV, III, II and I
10.
Venice are required to create a document that provides all the information about a maintenance task and outlines a process for completing that task. Also, her teacher wants to include details on who authorized the job, the scope, who it is assigned to, and what is expected in the said document. What kind of document is this?
a)
Job form
b)
Job Order
c)
Work service
d)
Ticket Service
11.
A computer repair job order typically includes information, which among the following information includes a detailed explanation provided by the customer or observed by the technician?
a)
Repair actions
b)
Equipment details
c)
Diagnostic findings
d)
Description of the computer issue
12.
Jordan is a computer technician and his customer named Shantelle forgot to confirm that she approves the repair work and associated costs in repairing her computer. Which of the following information is this?
a)
Repair actions
b)
Technician's notes
c)
Diagnostic findings
d)
Customer signature
13.
The following are the steps in measuring resistance. Choose the right sequence:
I. Connect the test leads.
II. Observe the meter indication.
III. Set the multimeter to Ohms or Resistance.
IV. Hold the probes at the end of the test leads together.
V. Measure the resistance of something like a light bulb that you know is good.
a)
I, II, III, IV and V
b)
III, II, I, IV and V
c)
III, I, II, IV and V
d)
I, III, II, IV and V
14.
A multimeter can measure the following, EXCEPT:
a)
Amperes
b)
Distance
c)
Resistance
d)
Voltage
15.
Which of the following testers can determine IP addresses, identify polarity, connected port and link connectivity?
a)
AC Tester
b)
Multimeter
c)
Multitester
d)
LAN Tester
16.
A Job Order is also known as the following, EXCEPT:
a)
Job Ticket
b)
Work Order
c)
Work Service
d)
Work Ticket
17.
A multimeter is a handheld tester used to measure electrical voltage, current (amperage), resistance, and other values. It is also known as what?
a)
Cur-ohm-meter
b)
Volt-ohm-meter
c)
Ampe-ohm-meter
d)
Resist-ohm-meter
18.
Which of the following parts of a multimeter points the needle to the 0 at the left side of the scale?
a)
Test Probes
b)
Pointer/Needle
c)
Dial/Infinity Knob
d)
Zero Ohm Adjuster
19.
Which of the following parts of a multimeter are used to connect to the circuit or device under test?
a)
Test Probes
b)
Pointer/Needle
c)
Zero Ohm Adjuster
d)
Range Selector Knob
20.
Which of the following parts of a multimeter shows the value of what is being measured?
a)
Scale
b)
Range
c)
Test Probes
d)
Zero Ohm Adjuster
21.
Which of the following parts of a multimeter allows more accurate measurement for small values?
a)
Scale
b)
Range
c)
Test Probes
d)
Zero Ohm Adjuster
22.
Among the following colors, what color indicates a positive probe?
a)
Black
b)
Orange
c)
Red
d)
White
23.
Felize found a faulty component in her computer, so she decided to check it with the other computers so that she can make sure whether the fault is in the computer or not. What kind of troubleshooting method she has done?
a)
Check Cables
b)
Trial and Error
c)
Notice Changes
d)
Hardware Settings
24.
Amid a busy workday, Franz, a software developer, encounters an unexpected error while testing a new feature he's been working on. So, he decided to determine what was changed before the problem occurred. What troubleshooting method he did?
a)
Check Cables
b)
Trial and Error
c)
Notice Changes
d)
Hardware Settings
25.
Where can you find the error or warning messages associated with any faulty hardware or software?
a)
Cable Viewer
b)
Event Viewer
c)
Notes Viewer
d)
Hardware Viewer
26.
Which of the following troubleshooting plan includes having a record on how a certain problem occurred and how did you solve it?
a)
Make Notes
b)
Event Viewer
c)
Notice Changes
d)
Hardware Viewer
27.
In case of any device failure, what do we need to check in computer to make sure that these are plugged in properly?
a)
Check RAM
b)
Check Cables
c)
Check Motherboard
d)
Check Event Viewer
28.
The following are the common trouble for computer units, EXCEPT:
a)
Double check the power connections.
b)
Unseated card. Loose cards could cause it to malfunction.
c)
Check the power cords and cable connectors in your computer unit.
d)
Check the boot sequence configuration in the advance BIOS (Basic In/Out Union) setup.
29.
Tools and equipment play a vital role in troubleshooting, and it helps the user to determine what in your computer hardware and network?
a)
Ampere
b)
Errors
c)
Resistance
d)
Voltage
30.
Among the following tools for testing computer system, which is used for heat dissipation for your processor?
a)
Soldering iron
b)
Thermal paste
c)
Lens dissipation
d)
Pliers and tweezers
31.
Among the following tools for testing computer system, which is used for picking small parts in your computer unit?
a)
Screwdriver
b)
Soldering iron
c)
Thermal paste
d)
Pliers and tweezers
32.
The following are used to eliminate electrostatic discharge in your work area, EXCEPT:
a)
Anti-static mat
b)
Anti-static spray
c)
Anti-static wrist strap
d)
Anti-static screwdriver
33.
Among the following tools for testing computer system, which is used to install and remove screws in your computer unit?
a)
Pliers and tweezers
b)
Screwdriver
c)
Soldering iron
d)
Thermal paste
34.
Among the following tools for testing computer system, which is used for cleaning optical media, such as DVD-ROMS and CD-writers?
a)
Lens cleaner
b)
Error cleaner
c)
Spray cleaner
d)
Thermal cleaner
35.
Which of the following components is a piece of computer hardware designed to allow computers to communicate over a computer network?
a)
Processor Hard Disk Drive
b)
Motherboard
c)
Hard Disk Drive
d)
Network Interface Card
36.
Which of the following components is used most often to identify fast, temporary forms of storage and commonly called RAM?
a)
Hard Disk Drive
b)
Memory
c)
Processor
d)
Video Cards
37.
Which of the following components is known as CPU or the Central Processing unit?
a)
Hard Disk Drive
b)
Motherboard
c)
Processor
d)
Video Cards
38.
Which of the following components is a nonvolatile data storage device and is usually installed internally in a computer?
a)
Hard Disk Drive
b)
Memory
c)
Motherboard
d)
Processor
39.
Which of the following components is an item of personal computer hardware whose function is to generate and output images to a display?
a)
Hard Disk Drive
b)
Image Cards
c)
Processor
d)
Video Cards
40.
The following are the factors that you need to consider in replacing computer parts and peripherals, EXCEPT:
a)
Computer form factor
b)
Components form factor
c)
Consider the component specification.
d)
Compatibility of the component or part.
41.
The following are rules in diagnosing computer system. EXCEPT:
a)
Know the facts
b)
Use your sense of urgency.
c)
Proper assembly and disassembly
d)
Focus on Field Replaceable Units.
42.
Which of the following components contains circuits that perform various functions?
a)
Hard Disk Drive
b)
Memory
c)
Motherboard
d)
Processor
43.
Which of the following factors causing computer failures and defects explains that untrained personnel would probably damage programs in PC?
a)
Firmware
b)
Freeware
c)
Peopleware
d)
Software
44.
A computer suddenly shutting down during a critical task due to overheating caused by a malfunctioning cooling fan is an example of what factor causing computer failures and defects?
a)
Freeware
b)
Hardware
c)
Peopleware
d)
Software
45.
A sudden power outage during a software update corrupts the operating system, causing data loss and rendering the computer inoperable temporarily. Which of the following factors is this?
a)
Electricity
b)
Firmware
c)
Hardware
d)
Software
46.
Lucas, a graphic designer, noticed that his computer was running slower than usual when launching design software and experienced occasional freezes. Which of the following factors is the caused of this?
a)
Electricity
b)
Freeware
c)
Hardware
d)
Software
47.
Sarah, a software developer, encountered repeated boot failures on her laptop after a recent firmware update. This scenario is an example of which of the following factors causing computer failures and defects?
a)
Electricity
b)
Firmware
c)
Hardware
d)
Software
48.
Figure 1 is an example of what?
a)
Job Order
b)
Logo Order
c)
Ticket Order
d)
Computer Repair Job Order
49.
Figure 2 is an example of what?
a)
Job Order
b)
Logo Order
c)
Ticket Order
d)
Computer Repair Job Order
50.
Three major components of computer system includes the following, EXCEPT:
a)
Firmware
b)
Freeware
c)
Hardware
d)
Software
100 %
