What is "B" called in the basic turning operation?

What is "A" called in the basic turning operation?

What is "G" called in the basic turning operation?

What is "A" called in the basic turning operation?

What is "B" called in the basic turning operation?

What is "C" called in the basic turning operation?

What is "D" called in the basic turning operation?

What is "D" called in the basic turning operation?

What is "F" called in the basic turning operation?

What is "F" called in the basic turning operation?

What is "G" called in the basic turning operation?

"Cutting Velocity" is denoted by:

"Depth of cut" is denoted by:

"Feed rate" is denoted by:

What is "A" called in the basic turning operation?

基本车削操作中的“A”是什么？

What is "B" called in the basic turning operation?

在基本车削操作中，“B”叫什么？

What is "C" called in the basic turning operation?

在基本车削操作中，“C”叫什么？

What is "D" called in the basic turning operation?

基本车削操作中的“D”是什么？

What is "E" called in the basic turning operation?

在基本车削操作中，“E”叫什么？

The formula for cutting velocity in milling operation is given by:

铣削操作中的切削速度公式如下所示：

If the given value of L is in millimeters and nr is in rotation per minute, the formula for cutting velocity in milling operation is given by:

如果给定的L值以毫米为单位，nr以每分钟转数为单位，则铣削操作中的切削速度公式如下所示：

If the given value of L is in meters and nr is in rotation per minute, the formula for cutting velocity in milling operation is given by:

如果给定的L值以米为单位，nr以每分钟转数为单位，则铣削操作中的切削速度公式如下所示：

If the given value of L is in meters and nr is in rotation per second, the formula for cutting velocity in milling operation is given by:

如果给定的L值以米为单位，nr以每秒转数为单位，则铣削操作中的切削速度公式如下所示：

If the given value of L is in millimeters and nr is in rotation per second, the formula for cutting velocity in milling operation is given by:

如果给定的L值以毫米为单位，nr以每秒旋转为单位，则铣削操作中的切削速度公式如下所示：

The formula for cutting velocity in turning operation is given by:

车削操作中的切削速度公式如下所示：

If the given value of "dw" is in millimeters and "n" is in rotation per minute, the formula for cutting velocity in turning operation is given by:

如果给定的“dw”值以毫米为单位，“n”以每分钟转数为单位，则车削操作中的切削速度公式如下所示：

If the given value of "dw" is in meters and "n" is in rotation per second, the formula for cutting velocity in turning operation is given by:

如果给定的“dw”值以米为单位，“n”以每秒旋转为单位，则车削操作中的切削速度公式如下所示：

If the given value of "dw" is in meters and "n" is in rotation per minute, the formula for cutting velocity in turning operation is given by:

如果给定的“dw”值以米为单位，“n”以每分钟转数为单位，则车削操作中的切削速度公式如下所示：

If the given value of "dw" is in millimeters and "n" is in rotation per second, the formula for cutting velocity in turning operation is given by:

如果给定的“dw”值以毫米为单位，“n”以每秒旋转为单位，则车削操作中的切削速度公式如下所示：

If the given value of "dw" is in millimeters and "n" is in rotation per minute, the formula for cutting velocity (meter per minute) in turning operation is given by:

如果给定的“dw”值以毫米为单位，“n”以每分钟旋转为单位，则车削操作中的切削速度（米/分钟）的公式如下所示：

If the given value of "dw" is in meters and "n" is in rotation per minute, the formula for cutting velocity (meter per minute) in turning operation is given by:

如果“dw”的给定值以米为单位，“n”以每分钟旋转为单位，则车削操作中的切削速度（米/分钟）的公式如下所示：

If the given value of "dw" is in millimeters and "n" is in rotation per second, the formula for cutting velocity (meter per minute) in turning operation is given by:

如果给定的“dw”值以毫米为单位，“n”以每秒旋转为单位，则车削操作中切削速度（米/分钟）的公式如下所示：

If the given value of "dw" is in meters and "n" is in rotation per second, the formula for cutting velocity (meter per minute) in turning operation is given by:

如果给定的“dw”值以米为单位，“n”以每秒旋转为单位，则车削操作中切削速度（米/分钟）的公式如下所示：

If the given value of "L" is in millimeters and "nr" is in rotation per minute, the formula for cutting velocity (meter per minute) in milling operation is given by:

如果给定的“L”值以毫米为单位，“nr”以每分钟转数为单位，则铣削操作中的切削速度（米/分钟）公式如下：

If the given value of "L" is in meters and "nr" is in rotation per minute, the formula for cutting velocity (meter per minute) in milling operation is given by:

如果“L”的给定值以米为单位，“nr”以每分钟转数为单位，则铣削操作中切削速度（米/分钟）的公式如下所示：

If the given value of "L" is in millimeters and "nr" is in rotation per second, the formula for cutting velocity (meter per minute) in milling operation is given by:

如果“L”的给定值以毫米为单位，“nr”以每秒旋转为单位，则铣削操作中的切削速度（米/分钟）公式如下所示：

If the given value of "L" is in meters and "nr" is in rotation per second, the formula for cutting velocity (meter per minute) in milling operation is given by:

如果“L”的给定值以米为单位，“nr”以每秒旋转为单位，则铣削操作中切削速度（米/分钟）的公式如下所示：

A steel cylinder with a diameter of 50 mm is being machined on a turning machine. If the spindle speed is set to 500 RPM, calculate the cutting velocity in meters per second (m/s). (Note: you have 3 minutes to calculate and answer the question).

A brass rod with a diameter of 0.030m is being turned on a lathe machine. If the spindle speed is set to 600 RPM, calculate the cutting velocity in meters per second (m/s). (Note: you have 3 minutes to calculate and answer the question).

A circular aluminum disc with a diameter of 0.080 m is being milled on a turning machine. If the workpiece rotates at 5 rotations per second, calculate the cutting speed in meters per second (m/s). (Note: you have 3 minutes to calculate and answer the question).

A steel cylinder with a diameter of 50 mm is being machined on a turning machine. If the spindle speed is set to 6 rotations per second, calculate the cutting velocity in meters per minute (m/min). (Note: you have 3 minutes to calculate and answer the question).

An aluminum cylinder with a diameter of 0.050 m is being machined on a turning machine. If the spindle speed is set to 300 RPM, calculate the cutting velocity in meters per minute (m/min). (Note: you have 3 minutes to calculate and answer the question).

An aluminum cylinder with a diameter of 60 mm is being machined on a turning machine. If the spindle speed is set to 360 RPM, calculate the cutting velocity in meters per minute (m/min). (Note: you have 3 minutes to calculate and answer the question).

An aluminum cylinder with a diameter of 0.065 m is being machined on a turning machine. If the spindle speed is set to 5 rotations per second, calculate the cutting velocity in meters per minute (m/min). (Note: you have 3 minutes to calculate and answer the question).

An aluminum cylinder with a diameter of 65 mm is being machined on a turning machine. If the spindle speed is set to 6 rotations per second, calculate the cutting velocity in meters per minute (m/min). (Note: you have 3 minutes to calculate and answer the question).

An aluminum cylinder with a diameter of 0.075 m is being machined on a turning machine. If the spindle speed is set to 600 rpm, calculate the cutting velocity in meters per minute (m/min). (Note: you have 3 minutes to calculate and answer the question).

一个直径为0.075米的铝圆柱体正在一台车床上加工。如果主轴速度设置为600 rpm，则以米/分钟（m/min）为单位计算切割速度。（注意：您有3分钟的时间计算并回答问题）。