Replacement of the oil filter on a tractor engine should be done each time the:

One of the most necessary services required for batteries is:

If a chain saw is to be stored for the summer, the fuel tank should be:

Changing the oil is the main service done on a four-cycle engine’s:

Checking the engine oil level is a service unnecessary for:

A new model small engine will lack:

If an engine has fuel and compression but fails to start, what is the likely problem?

What three things should Ted check as he begins troubleshooting an engine that fails to start?

Oil filters should be changed when the:

The main service performed on a spark plug is to:

A welding shop operator using people, resources, and processes to reach a goal is:

The most effective way for agricultural mechanics students to develop leadership qualities is through:

When planning a speech, the speaker should consider the purpose, the occasion, and the:

The two types of speeches based on preparation are prepared and:

Content and composition of the speech are determined:

Voice, stage presence, power of expression, response to questions, and general effect are factors used in speaking to evaluate the:

The component of the agricultural mechanics program that gives students an opportunity to explore interests and gain work experience is the:

Betty wants to develop her leadership skills. The part of the agricultural mechanics instructional program that will most help her is the:

The purpose of a speech that gives knowledge to the audience is to:

The leadership quality that means reliable support for an individual, group, or cause is:

What part of the agricultural mechanics instructional program has as a major purpose the development of communication skills and confidence through competitive events?

The way a speech is organized and written is the:

The purpose of a speech that convinces people to believe or to do something is to:

Melissa came into the agricultural program at New Era High School with many public speaking skills already developed. She most likely developed these skills through:

The book considered to be the authority on and the basis for parliamentary law is:

Martina is serving as president. She indicates that members should stand by tapping the gavel:

Various numbers of taps of the gavel have different meanings, but chairperson Alma uses the gavel as the symbol of:

Which motion is closed to debate in parliamentary law?

What vote is required when a motion will limit the rights of a member?

To gather more information about a main motion, José should:

The last step in making and disposing of a motion is for the chair to:

Which method is the most subjective form of voting?

If Michelle makes a motion while another motion is already before the group, the motion that she makes must be:

Angelica discovers the motion to appeal is different from all other privileged and incidental motions in that it may be:

If a small-engine shop owner has a $250,000 mortgage and owes Farm Credit Service $30,000 for this year’s payment, what amount should be entered on the non-current liability line of the financial statement?

If Becky has a $500,000 mortgage on her land and buildings, and she owes Farm Credit Service $60,000 for this year’s mortgage payment, what amount should be entered on the current liability line of the financial statement?

A financial statement lists mortgages due after the current year as:

If a welding shop has total assets of $500,000 and total liabilities of $300,000, what amount would be the correct entry on the net worth line of a financial statement?

If a tractor dealer’s inventory shows supplies worth $41,000 and land valued at $200,000, what amount should be entered on the non-depreciable inventory line of the financial statement?

If a business has $10,000 cash on hand, $25,000 in a checking account, and land valued at $300,000, on which line of a financial statement should the $335,000 total be entered?

The part of a net worth statement that shows all debts is:

On a net worth statement, net worth is the same as:

On a financial statement, items that can be quickly converted to cash or that will be sold within 12 months are:

On a financial statement, net worth is:

The fastener that needs a threaded hole in at least one of the pieces of metal being joined together is a:

What is used to keep bolt nuts tight against a metal surface?

A farmer uses a lock washer between a nut and the surface of the metal to:

What device is used with a nut to fasten together two pieces of metal?

What type of fastener is used when the most strength is needed?

How should Joseph remove a hex socket head bolt?

A cotter pin is used with a castle or slotted nut to:

Plow bolts are used to attach plowshares because the bolt heads:

When one makes a cut with a metal chop saw, the blade should always:

Fred is adjusting the arm guide rollers on a metal-cutting band saw to cut a 1/2" piece of metal. How far should he set them from the stock?

For successful cutting in a plasma cutting system, what is imperative to remove from the compressed air?

In using a plasma cutting torch, which should Charles have in place on the torch to protect the electrode?

Which equipment would be unnecessary for someone operating a portable disc grinder on metal?

Before removing scraps from the metal chop saw, the operator should:

Which type of electricity is required for a plasma cutting system?

Which type of Immersion SAE would use a local stakeholder committee's minutes as a form of documentation?

In what type of SAE project does one plan, implement, operate, and assume the financial risk in an agricultural activity?

Some students have jobs outside of regular classroom hours that may be paid or unpaid, such as working at a farm supply store. Which type of Immersion SAE may these students be participating in?

As part of which area of a Foundational SAE may students develop a list of tools commonly used by an electrician and the possible injuries caused by using them?

Karen is building raised beds at an elementary school for a service learning project. A form of documentation she can use as part of this project would include a:

For which part of his Foundational SAE would Daniel develop a list of 10 common occupational accidents and ways to avoid them?

In which part of a Foundational SAE would students learn how to budget using a credit line appropriately?

What type of tractor is designed to offer increased traction and pulling power?

Tractors or other farm equipment with a maximum speed of less than 25 miles per hour should always have a:

To learn safety rules before using a tractor, what should be done?

More than one person riding on a tractor at the same time is:

What type of tractor is made for planting cotton and corn?

A tractor with a front-end loader may tilt forward if a heavy load is attached:

Which is a small tractor that is popular with apple and orange growers?

Red is the color used to show the location of:

What should a person wear to prevent eye burn from arc welding?

How can the climber keep from falling off a ladder?

Adequate ventilation is the best way to avoid problems from:

To help prevent fires, the welding area should be cleared of:

Gasoline and paint should be stored in a:

An Ag Mechanics class plans to pour a concrete slab that is 12' × 10' and will use 2" × 6" lumber for a form. How many 2" × 6" × 12' pieces of lumber will be needed to complete the task?

A horticulture class wants to make concrete stepping stones. It has all the ingredients, which include cement, sand, gravel, and water. When the class mixes these ingredients, which one should be added last?

Shane wants to pour an 8-inch concrete pad for a heavy equipment shop and feels he needs to reinforce the concrete. Which material is best for strengthening the concrete?

Jerry plans to pour a concrete driveway and can only purchase concrete in whole cubic yards. If he calculates the amount needed at 7.3 cubic yards, how many should he purchase?

An agricultural education class is planning to mix some concrete and has four bags of cement and a wheelbarrow load of gravel. What other ingredient will the class need to make concrete?

Larry plans to mix some concrete to pour some stepping stones for his grandmother and uses 16 shovels of sand and 24 shovels of gravel. How many shovels of cement will he need to add to the mixture?

In metal fabrication design, when should sketches be prepared?

If Laura is using a computer to design a metal project, she is using:

If Carol is making a metal trailer, what tool should she use to thread a metal rod?

What abbreviation is used for half-round?

If James is designing a metal project, his plan must:

Which is most important when making a metal project?

When Megan files a round piece of metal, she holds the metal with a:

What weld is indicated by a rectangle?

What does a welder need to complete a metal project?

What should Emily complete first in the construction of her metal trailer?

What step in designing should follow checking specifications and dimensions?

Before Larry constructs a metal fabrication project, he first needs a:

One of the last things done when building a metal trailer is to:

Time and money can be saved in metal project construction by:

If the two diagonal measurements from opposite corners of a metal trailer frame are unequal, the corners are:

If a welding job needs the heat concentrated in a smaller area, which welder should be selected?

Welding from the bottom to the top is done to make a:

Kay should use the #12 or #14 welding helmet shaded lens recommended for TIG and MIG welding because they are:

If Roberto tacks two pieces of sheet metal together on each end and in the center prior to welding, it will help to:

When one welds with an oxyacetylene unit, pipe should always be:

Vertical welding with oxyacetylene is usually done:

Clay can weld in all positions, but he has problems welding pipes. Why is welding pipes more difficult?

If Chris makes a corner fillet joint, the two pieces of metal are welded together:

If a bead welded with an MIG welder is too wide, the width should be corrected by:

What type of welding is difficult because of constantly changing positions?

When one uses the electric drill press to drill holes in flat or rectangular steel, the steel should be held in place by using:

The minimum number of hacksaw teeth that should be cutting the metal at one time is:

When Sue is using a file, she should:

A cold chisel is used to cut:

Which measuring tool is best to determine the space between two parts, such as piston ring gaps or valve gaps?

What is used to determine the size of a portable electric drill?

If a welder wants to mark metal so that there will be a scratch or permanent mark, he/she should use:

What tool is used to make a starting dent before drilling a hole in metal?

To make a square mark on a board, the handle of a square has to be held:

If a board is marked correctly, sawing out the line will make the board:

What type of drill is most accurate for drilling holes in cold metal?

The best micrometer for measuring to the bottom of openings such as holes or slots is the:

What should be used to support machinery or equipment after it has been lifted to the desired height?

Eric uses oil while cutting threads on a metal rod to:

Using a file without a handle may result in:

The thimble and barrel of a micrometer are marked with scales for:

To prevent a drill bit from binding, causing the stock to rotate or break the drill bit, what is done to the drill just before it breaks through the metal?

When sawing with the hacksaw, one should:

What hammer is used to hit a metal punch to drive objects?

Two simple maintenance procedures done before starting a four-cycle engine are:

Checking the water and cleaning the radiator on tractors and other selfpropelled equipment are preventive maintenance for the:

Cleaning the outside parts of a small engine is the most important maintenance for the:

Which hammer should be used to remove wood from a building?

If Josh is at a location without electrical power, what saw should he use to cut a board across the grain of the wood?

Most tools used for measuring wood are divided into:

When unused, a portable belt sander should be laid:

Where should the bottom saw teeth point on a portable circular saw blade used to cut wood?

Lee used one tool as a plumb, depth gauge, inside and outside try square, level, miter square, and marking gauge. What tool did he use?

When using a nail hammer, the user should hold the handle:

What portable power tool is used to smooth wood surfaces?

What method used to fasten wood is quick but is also the weakest method?

What portable power tool is used to make straight cuts in wood?

What saw uses a blade that moves back and forth to cut curves?

What power tool is used to straighten and smooth edges of boards and to cut bevels?

Which end of a rough-cut board should be put in a planer first?

What is the minimum number of hacksaw teeth that must be in contact with the edge or surface of the metal being cut?

Sandy uses a hammer to drive small nails, and Nicole uses a hammer to drive large nails. Compared to Sandy's hammer, Nicole's hammer should be: