Wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Homework Quiz

Total questions: 10

Worksheet time: 5mins

Name
Class
Date
1.

The ECM ________________the engine from damage during extreme operating conditions or from further damage when an essential engine component fails.

a)
The ECM controls the radio system in the vehicle.
b)
The ECM is responsible for adjusting the air conditioning settings.
c)
The ECM regulates the tire pressure in the vehicle.
d)
The ECM monitors engine parameters and adjusts settings to protect the engine.
2.

There are what two levels of engine protection?

a)
Primary protection and tertiary protection
b)
Main protection and backup protection
c)
First protection and second protection
d)
Primary protection and secondary protection
3.

Specifically, the ECM records::

a)
Engine operation, performance, and efficiency data
b)
Transmission fluid levels
c)
Windshield wiper usage
d)
Tire pressure readings
4.

Two levels of warning lamps indicate faults. _________lamps indicate a warning. _______ lamps indicate that the vehicle must stop.

a)
Blue
b)
Red, Amber
c)

Yellow, Red

d)
Green
5.

Engine torque can be limited by the ECM. This function is referred to as ___________ ______________________.

a)
power restriction
b)
torque control
c)
speed governing
d)

engine derating

6.

Forced shutoff protects the vehicle from _____________ ______________.

a)

potential speed

b)

impending doom

c)

likely internment

d)

serious errors

7.

If the engine has been forced to shut down due to an active engine protection function, the driver can power down the ECM for ______seconds to reset the _____-second delay.

a)
5, 35
b)
15, 25
c)
20, 40
d)
10, 30
8.

The Idle cool down feature protects the engine when the ______________temperature is high

a)
radiator
b)
oil
c)
transmission
d)

exhaust

9.

DL1 (J1939-1) is electrically terminated at each end with a _____________. Each DL1 (J1939-1) network has two _________________.

a)

resistor, resistors

b)
fuse, switches
c)
inductor, relays
d)
capacitor, connectors
10.

The correct number of resistors can be checked by measuring the resistance across the DL1 (J1939-1) circuit at the 16-pin diagnostic connector. The correct resistance is ____-_____ ohms. When tested individually, each resistor must have a resistance of ______-______ ohms. Data link 2 ISO (International Organization for Standardizatio

a)

50-70 ohms

110-130 ohms

b)

40-80 ohms

80-160 ohms

c)

100-200 ohms

40-80 ohms

d)

60-120 ohms

80-160 ohms