One of the best practices of a good draftsman is to NEVER letter without __________.

Central horizontal strokes of some letters placed at mid-height appear to be below center due to optical illusion. Which letters are they?

What is the horizontal guide line used to determine the general height of lower case letters?

What line is projected as a shorter line in a drawing?

If a drawing has an equal measure, what does it refers to?

Geometrical solids are usually drawn in how many views?

What kind of drawing has one surface that is parallel to the picture plane?

This pictorial view is normally seen by the observer’s eyes. Which one is it?

If all the information needed to complete construction of a product is shown, then what do you call this type of mechanical drawing?

Horizontal lines are best drawn using this instrument.

A drawing instrument that serves as guide in drawing vertical and diagonal lines as in triangles. It is generally used in drawing horizontal lines. Which one it?

In drawing, which view shows most clearly the shape of the object?

A type of section used to emphasize the interior construction of an object without destroying the continuity of the exterior view.

Where should you place the name of the top view for labeling?

These are lines to indicate the measurement of objects and are represented by fine dark solid lines.

These are considered as the heaviest or darkest lines that surround a draw

The lightest or finest line that represents the axis or center of objects with symmetrical shapes is known as _________.

If a drawing is generally made without the aid of drawing instruments and straight edges then it is classified as __________.

This view is generally drawn directly above the front view in an orthographic drawing. Which one is it?

Drafting is considered as the universal language of __________.

Which of the following drawing instruments will you use if you are to create distances into equal parts, transfer measurement and spacing points or lines?

These lines are used to indicate the measurement of objects and are represented by fine dark solid lines.

What is that fine line used to show clearly the dimension limits?

When solidity of an object is shown by gradual darkening of its portion or portions, what process is involved?

What is that kind of oblique drawing which is drawn with the side reduced to one half of the corresponding dimension in the orthographic drawing?

Miley is asked to draw an art project without the aid of drawing instruments and straight edges. Which of the following will she apply to perform the task?

To completely describe a cone, sphere, and rectangular pyramid, how many views are needed?

A kind of perspective drawing with one vanishing point is known as _________.

The system for graphically representing an object by line drawing on a flat surface.

Angles of projection generally used for drafting purposes are __________.

Standard projection used by many European countries (ISO Standard).

The common views used in multi-view drawing are ______________.

Letters that are composed of uniform width elements are classified as _________.

Type of dimensioning that requires all dimension figures be lettered between guide lines that are parallel to the bottom edge of the drawing paper.

A line used to show the limits of a dimension.

An oblique drawing in which the depth axis lines are in full size.

This is the type of oblique pictorial view where the dimension of the receding features of the object is drawn half-scale.

The process of describing the object by placing sizes and related information on a drawing.

If you are to present the pictorial drawing that is most pleasing to the eyes of the viewer then one of the following methods should be used.

The place or point where the observer is supposed to stand while viewing the object.

The object is placed on the horizon at the eye level of the observer.

Standard of projection used by Americans, British and Canadians (ANSI Standard).

A drawing showing more than one side of an object tilted in front of the observer.

The point where the horizontal line in the perspective view seems to converge or meet.

When parts that are not seen are represented by series of light dash lines then this line is classified as _________.