It is a tool used to measure or set distances, and layout arcs and circles.

It is used for chipping flat surfaces, cutting of rivets or metal fasteners, thin sheets, small bars; and for general purposes.

It is a tooth cutting tool usually with a solid and adjustable frame.

This tool is used to tighten and loosen screws by pushing or pulling screws in a rotating manner.

This is a flexible rule, when extended will support itself, but may also be used to measure curved, irregular surfaces.

A _____ is any tool that is powered by hand rather than a motor.

This device is designed to hold work securely while performing skills through grinding, bending, fitting, and cutting of metals.

It is used for measuring long pieces of stock.

This is a 12-inch/one-foot rule and it is used to take/make simple measurements.

It is used for measuring short pieces of stock.

A system of measurement originated in England also known as the U.S. customary system of measurement.

It was developed in France and also known as the S. I. (International Standard).

The inch is divided into segments called _____________.

The inch can be divided into 2, 4, 6, 8 and 12 parts.

Which of the following is not included in English System?

What mandatory rules and standards set and enforced to eliminate or reduce occupational safety and health hazards in the workplace?

What is a situation in the workplace that has the potential to harm the health and safety of people or to damage the plant and equipment?

What hazard is due to the transfer of energy between an object and a worker?

The following are the example of physical hazard except:

The following are the example of biological hazard except:

The following are the example of ergonomic hazard except:

People who work with animals, animal products or animal wastes have a beater risk of infection because of

Why do we use earplug?

What benefits of health and safety guidelines is primarily to guard employers and their staff from injury, and illness?

Defective hand tools are kept and ___________.

One way of checking whether hand tools are defective or non-defective is the ________________.

Which is determined after the operation of a hand tool is tested?

All hand tools with major defects are subjected to ______________.

When there is something wrong with either the tools or equipment, they need immediate repair and maintenance, this refers to __________.

Vibration or extra noise from the operation means problems on parts and accessories started to develop, this refers to __________.

An expert of the field when doing a visual inspection is more concerned on the of the tools and equipment.

Tools that are no longer functional may cause _________ when is used.

Which is not a part of ARC welding symbol?

It is a circle drawn on the welding symbol, indicating that the described weld is to be made all around the part.

It is a line connected to the arrow.

It indicates the position of the weld.

It is added to the symbol when a special note is required.

It is an open box that intersects the reference line.

A symbol added to the basic AWS welding symbol to indicate that a weld is to be made at the job site.