NEW
Font size
Worksheets212 PPT5 Water Regulations Quiz
Total questions: 14
Worksheet time: 7mins
Priya is learning how to use a bending machine. What is the first step she should take?
Bend the tube to 90 degrees.
Measure the distance required and mark it on the tube.
Place the 4d mark on the bending machine.
Measure back four diameters of the tube size.
Oscar is working on a plumbing project and needs to join copper pipes. Which method involves pushing to join copper pipes?
Push-fit fittings
Twist fittings
Snap fittings
Lock fittings
Leo is learning plumbing and wants to know which fitting type requires extra solder to be added?
End feed
Integral solder ring
Compression fitting
Push-fit fitting
Arthur is learning plumbing and needs to know the second step in solder ring fittings. What should he do next?
Pipe is cleaned on outside.
Flux is added.
Joint is heated.
Joint is wiped clean.
Sophie is learning plumbing and wants to know: What is the first step in end feed fitting?
Flux is added.
The pipe is cut then the joint is cleaned inside.
Solder is added.
Joint is wiped clean with cloth.
Benjamin is learning plumbing and wants to know: What is the purpose of adding flux in the end feed fitting process?
To cool the joint
To clean the pipe
To help solder flow
To heat the fitting
Priya is learning how to install plumbing pipes. What is the second step in the end feed fitting process?
Add flux
Clean the pipe on the outside
Heat the fitting
Wipe the joint with cloth
George and Sophia are discussing plumbing. What are the two styles of compression fittings mentioned?
Type A and Type B
Type X and Type Y
Type 1 and Type 2
Type C and Type D
Oscar is working on a plumbing project. What materials should he use for Type A compression fittings?
Half-hard copper and plastic pressure pipe
Steel and iron
Wood and glass
Rubber and fabric
Freya is learning plumbing and needs to use a Type A fitting. What is the first step she should take?
Cut the pipe square
Paint the pipe
Bend the pipe
Heat the pipe
Scarlett is working on a plumbing project. What is used to assemble a Type A fitting?
An olive
A nail
A screw
A bolt
During a science experiment, Aarav is asked to identify which part of the apparatus is labeled as "Tube" in the diagram?
The last part
The first part
The middle part
The smallest part
Arjun is working on a construction project. What is the main use of Type B fittings?
Low pressure work
High pressure and below ground pipe work
Decorative purposes
Electrical wiring
Emily is working on a home plumbing project. What is the typical size range for push-fit plumbing fittings she should consider?
5–15mm
15–50mm
25–75mm
30–60mm
