Wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Level 2 Health & Safety - Hazardous Situations [Long]

Total questions: 66

Worksheet time: 33mins

Name
Class
Date
1.

Which of the following is considered a common site hazard?

a)

Trailing leads

b)

Bright lighting

c)

Comfortable seating

d)

Fresh air

2.

Which of the following is NOT listed as a common site hazard?

a)

Presence of dust and fumes

b)

Contaminants and irritants

c)

Proper use of tools

d)

Potential presence of asbestos

3.

Who enforces the laws governing the disposal of hazardous waste?

a)

Construction companies

b)

Local communities

c)

Environment Agency and Local Authorities

d)

Private waste management firms

4.

Which regulations cover plumbing activities that use mechanical lifting equipment?

a)

Health and Safety at Work Act 1974

b)

Lifting Operations and Lifting Equipment Regulations 1998

c)

Control of Substances Hazardous to Health Regulations 2002

d)

Manual Handling Operations Regulations 1992

5.

What should you do if an item is too heavy or unstable to lift?

a)

Use a mechanical lifting aid

b)

Lift it with a partner

c)

Leave it where it is

d)

Try to lift it alone

6.

When lifting an object as a team, what is important about the team members?

a)

They should be of different heights and strengths

b)

They should be similar in height and strength

c)

They should be the same age

d)

They should have the same experience level

7.

What does the term MSD stand for in the context of manual handling injuries?

a)

Musculoskeletal Disorders

b)

Mechanical Safety Devices

c)

Manual Safety Directives

d)

Material Safety Data

8.

What should you do before lifting or handling a load?

a)

Start lifting immediately

b)

Plan the lift

c)

Ask someone else to lift it

d)

Ignore the load

9.

What is the recommended way to hold a load?

a)

At arm's length

b)

As close to the body as possible

c)

On your shoulder

d)

Above your head

10.

Where should the load be kept while lifting?

a)

Above the head

b)

Close to the waist

c)

At arm's length

d)

On the floor

11.

What should you avoid doing with your back while lifting?

a)

Twisting or leaning sideways

b)

Keeping it straight

c)

Bending slightly

d)

Arching backwards

12.

Where should you look when handling a load?

a)

At the load

b)

At the ground

c)

Ahead

d)

At your feet

13.

Which of the following is a contaminant or irritant that plumbers should take care with?

a)

Water

b)

Lead

c)

Sand

d)

Wood

14.

What is a potential hazard associated with burning gas in plumbing?

a)

Oxygen

b)

Carbon dioxide

c)

Carbon monoxide

d)

Nitrogen

15.

Which of these substances is used in welding and can be an irritant?

a)

Oxy-acetylene

b)

Water

c)

Sand

d)

Wood

16.

What are the components needed for combustion to create fire?

a)

Fuel, Oxygen, Heat

b)

Fuel, Water, Heat

c)

Oxygen, Water, Spark

d)

Propane, Water, Heat

17.

What additional element is needed with propane and oxygen to create a flame?

a)

Water

b)

Heat

c)

Spark

d)

Fuel

18.

What is one of the biggest causes of workplace fatalities and major injuries?

a)

Electrical shocks

b)

Falls from height

c)

Chemical exposure

d)

Fire hazards

19.

According to the Work at Height Regulations 2005, what is the main purpose of these regulations?

a)

To improve productivity

b)

To prevent death and injury from a fall from height

c)

To reduce noise pollution

d)

To enhance communication

20.

Which of the following is considered work at height?

a)

Working on a flat roof

b)

Sitting at a desk

c)

Driving a vehicle

d)

Walking on a sidewalk

21.

What should be considered when taking precautions for work at height?

a)

The color of the equipment

b)

The weather conditions

c)

A sensible approach and common sense

d)

The time of day

22.

What is one of the most common causes of workplace death and serious injury related to roof work?

a)

Electrical shocks

b)

Falls from roofs

c)

Chemical exposure

d)

Heavy machinery accidents

23.

Which of the following materials is likely to be fragile when working at heights?

a)

Reinforced concrete

b)

Steel beams

c)

Roof lights

d)

Solid wood planks

24.

Where can accidents from fragile roofs occur besides construction sites?

a)

Underground tunnels

b)

Roofs of factories

c)

Open fields

d)

Underwater facilities

25.

Which of the following is NOT listed as a fragile material in the document?

a)

Rotted chipboard

b)

Non-reinforced fibre cement sheets

c)

Solid brick walls

d)

Corroded metal sheets

26.

What is the maximum weight capacity for a Class 1 Industrial ladder?

a)

175kgs

b)

150kgs

c)

125kgs

d)

200kgs

27.

Which type of ladder is suitable for up to 150kgs?

a)

Industrial

b)

Commercial

c)

Domestic

d)

Residential

28.

What is the recommended maximum duration for using ladders?

a)

30 minutes

b)

60 minutes

c)

45 minutes

d)

90 minutes

29.

What material are ladders commonly manufactured from?

a)

Wood, aluminium, fibre glass

b)

Steel, plastic, rubber

c)

Copper, iron, bamboo

d)

Glass, stone, carbon fiber

30.

What should be done to minimize the distance and consequences of a fall when working at height?

a)

Use the right type of equipment

b)

Work faster

c)

Use heavier equipment

d)

Avoid using any equipment

31.

What should you do before using tools, especially if they are not yours?

a)

Inspect the tools

b)

Ignore the tools

c)

Use them immediately

d)

Lend them to others

32.

Why is it important to check tools during the working day?

a)

To ensure they are shiny

b)

To make sure no damage or faults have occurred

c)

To see if they are expensive

d)

To count how many you have

33.

What should you ensure when using tools such as a hammer?

a)

The handle is colorful

b)

The head is securely fixed to the handle

c)

The tool is lightweight

d)

The tool is brand new

34.

What is a potential danger of using a chisel with a mushroom head?

a)

It might be too sharp

b)

A splinter of metal could fly off

c)

It could be too heavy

d)

It might not cut properly

35.

What should you always inspect for damage to avoid electric shock when using power tools?

a)

The tool body

b)

The handle

c)

The battery

d)

The switch

36.

Why is it important to ensure the guard is in place on power tools?

a)

To prevent overheating

b)

To avoid severe cuts or eye damage

c)

To increase speed

d)

To reduce noise

37.

What risk does damage to the plug of a power tool pose?

a)

Overheating

b)

Electric shock

c)

Reduced efficiency

d)

Increased noise

38.

What can a bare wire in a power tool lead to?

a)

Increased power

b)

Electric shock or fire

c)

Faster operation

d)

Reduced vibration

39.

What should you do if a power tool does not have an in-date PAT sticker?

a)

Use it with caution

b)

Do not use it

c)

Use it only for short periods

d)

Use it with protective gear

40.

What does the law require regarding the condition of a construction site?

a)

It must be in 'good order' and clean.

b)

It must be painted regularly.

c)

It must have a security guard.

d)

It must be inspected weekly.

41.

What is essential for safe and efficient materials storage on a construction site?

a)

Good cooperation and coordination.

b)

High-tech storage facilities.

c)

Daily inspections by the client.

d)

Automated storage systems.

42.

Who should discuss and agree on the arrangements for materials storage in a project?

a)

Contractors and the project client.

b)

The local government.

c)

The construction workers.

d)

The suppliers only.

43.

What should larger notifiable projects include in their construction phase plan?

a)

Arrangements for materials storage.

b)

A list of all workers.

c)

A detailed weather report.

d)

A map of the local area.

44.

What is asbestos?

a)

A synthetic polymer used in textiles

b)

A naturally occurring mineral used in building materials

c)

A type of metal alloy used in construction

d)

A chemical compound used in cleaning products

45.

During which period was asbestos extensively used as a building material in Great Britain?

a)

1920s to 1940s

b)

1950s to mid-1980s

c)

1980s to 2000s

d)

2000s to 2020s

46.

Which of the following is NOT a place where asbestos can be found?

a)

Eaves, gutters, and rainwater fall pipes

b)

Central heating flues

c)

Computer chips

d)

Ceiling finishes

47.

Which of the following is a method to reduce the risk of injury from hazards?

a)

Method statements

b)

Hazardous materials

c)

Emergency exits

d)

First aid kits

48.

What is one of the methods listed to reduce the risk of injury?

a)

Safety drills

b)

Risk assessments

c)

Fire extinguishers

d)

Protective clothing

49.

What is a "permit to work"?

a)

A document that authorizes specific work within a nominated time frame

b)

A tool used to measure work efficiency

c)

A certificate of completion for a project

d)

A checklist for daily tasks

50.

Permits to work are used to:

a)

Increase productivity

b)

Reduce risk of injury

c)

Train new employees

d)

Monitor employee attendance

51.

Which of the following is NOT mentioned as a method to reduce injury risk?

a)

Safety signs

b)

Method statements

c)

Risk assessments

d)

Safety drills

52.

What is the first step in a risk assessment as recommended by the HSE?

a)

Decide who might be harmed, and how.

b)

Identify the hazards.

c)

Evaluate the risks and decide on precautions.

d)

Record your findings and implement them.

53.

Which step involves deciding on precautions in a risk assessment?

a)

Identify the hazards.

b)

Record your findings and implement them.

c)

Evaluate the risks and decide on precautions.

d)

Review your assessment and update if necessary.

54.

What should be done after recording your findings in a risk assessment?

a)

Identify the hazards.

b)

Decide who might be harmed, and how.

c)

Review your assessment and update if necessary.

d)

Evaluate the risks and decide on precautions.

55.

What does a "permit to work" describe?

a)

The work and how it will be carried out

b)

The budget for the project

c)

The number of workers required

d)

The location of the work site

56.

What is required when work is identified as "high risk"?

a)

Strict health and safety controls

b)

Additional funding

c)

More workers

d)

Extended deadlines

57.

What is the purpose of a written risk assessment in a "permit to work"?

a)

To list precautions required to complete the work safely

b)

To estimate the cost of the project

c)

To determine the project's timeline

d)

To allocate resources

58.

What is a work method statement primarily used for?

a)

To provide a general overview of a project

b)

To give specific instructions on safely performing work-related tasks

c)

To outline financial plans for a construction project

d)

To list all the materials needed for a project

59.

What might a work method statement include besides instructions?

a)

A list of employees

b)

A hot work permit or other permits to work

c)

A budget breakdown

d)

A timeline of the project

60.

What are employers required to provide to ensure employees are aware of health and safety issues?

a)

Safety signs

b)

Training manuals

c)

First aid kits

d)

Uniforms

61.

How many types of safety signs are generally used?

a)

Four

b)

Two

c)

Six

d)

Eight

62.

What do safety signs use to convey messages quickly?

a)

Symbols and pictures

b)

Long paragraphs

c)

Detailed instructions

d)

Audio messages

63.

What colour background does a mandatory safety sign have?

a)

Yellow

b)

Red

c)

Blue

d)

Green

64.

Which type of safety sign indicates a risk of danger or hazard ahead?

a)

Mandatory

b)

Warning

c)

Prohibition

d)

Safe conditions

65.

What is the colour of a prohibition safety sign?

a)

Blue

b)

Yellow

c)

Red

d)

White

66.

Which type of safety sign provides information and has a green background?

a)

Mandatory

b)

Warning

c)

Prohibition

d)

Safe conditions/Information