WorksheetsSolid Edge Certification pt 1 and pt 2 guide
Total questions: 48
Worksheet time: 5hrs 14mins
what shortcut key enables switching from Normal Select Mode to Add/Remove Mode?
Alt
Tab
Spacebar
Esc
Physical Properties is found on which tab?
View
Home
Tools
Inspect
Which type of reference plane is not created by the user in synchronous mode?
Coincident Plane
Base reference plane
Global reference plane
local reference plane
Which of the following is not a face relationship?
Coplanar
Concentric
Parallel
Angle
In an assembly, which command enables creating assembly relationships between selected parts?
Drag Component
Align
Assemble
Insert
What select tool mode would enable you to select a face, and if the face is picked again would deselect the face?
Add/Remove
Normal
Add
Remove
In the part environment, what is the area that displays model features?
Object toolbar
Ribbon toolbar
Feature PathFinder
Feature Manager
To add threads to a shaft, you use the ______ command
Hole
Extrude
Tap
Thread
Where is the Face relate commands?
Home Tab> face related groups
Sketch Tab> face related groups
Tool tab> face related groups
View tab> face related groups
Part Painter is found on which tab?
View
Home
Display
Surfacing
Which 2D constraint could be used to align two linear elements?
Equal
Tangent
Coplanar
Collinear
Which of the following is not a method to unlock the sketch plane?
Right-click the locked sketch in the Pathfinder and select Lock Sketch
Click escape to unlock the plane
Click the lock icon in the upper right corner of the window
Plane press the F3 Key
To sketch a line, you?
Click to start the line and right click to end the line
Click and drag the mouse from a starting point, releasing the mouse button at the endpoint
Click once from start point and click once for a end point
click once for a start point and enter for the second point
Which of the following is not a method to lock to a sketch plane?
Move the cursor over a face or reference plane and select the "lock" icon
Right-click the existing sketch in the PathFinder and select the Lock Sketch Plane
click on a face or reference plane, then click the lock screen
Move the cursor over a face or reference plane and press F3
Which 2D constraint could be used to align two linear elements?
Coplanar
Tangent
Collinear
Equal
Which relate commands would you use to align the center point of the circle with the midpoints of the lines, putting it directly in the middle of the rectangle
Parallel
Horizontal/Vertical
Perpendicular
Symmetric
( Question 4 on Part 2) To create the solid from the sketch, ________
Select 2 regions and extrude with the arrow
you must trim the corners and use the extrude command to select all of the exterior lines
you must remove the 2 extra lines in the lower left and trim the corners
you must first delete the 2 interior lines in the lower right corner
(Question 6 Part 2) This command is used for which operation or operations?
Move only
Move and Copy
Copy only
Transition
(Question 7 Pt 2) The single operation used to intersect the two lines is _____
Trim
Extend to Next
Trim Corner
Chamfer
(Question 8 PT 2) Using the Trim command, where would you selected to create the sharp corner and remove the overlapping elements?
A and B
A and D
C and D
B and C
What feature is used to remove sharp edges in a 3D part model, typically for safety
Remove
Break Corner
Chamfer
Fillet
How do you add Ordered features to synchronous model?
Right Click on a synchronous feature and move to ordered
Right Click and transition to the ordered environment and add features
Only synchronous features can be added after ordered features
You cannot add Ordered features to synchronous models
What type of file do I need to export if I want to print the model with a 3D printer
IGS
ASM
STL
STP
PT 3 Q3: When dragging Face #1 after selecting the arrow, which design intent relationships will be found and maintained to move faces 2 through 6 as shown in 1 move
Symmetry and Coplanat
Offset and Coplanar
Aligned and Coplanar
Parallel and Symmetry
Which of the following is not a method of face selection
Use the selection manager to assist in selecting and deselecting faces
Hold down the CTRL key to manually select and deselect faces (one face at a time)
Tap the spacebar to use the select modes to select and deselect faces
Hold down the ALT key to manually select and deselect faces
When you copy a group of faces or features, what happens to the original faces
They will move to a new location
They will be turned to construction
The will disappear
Nothing, they will not change
PT3 Q7: What feature is single feature could be used to create this solid
Extrude
Sweep
Revolve
Spline
Which two options are used to define the number of spacing of feature patterns
Fixed and Floating
Exact and Floating
Fit and Floating
Fit and Fixed
How do you prevent a specific dimension from changing when you edit other dimensions in the model
Select the lock icon in the dimension value edit dialog
Deselect the lock icon in the dimension value edit dialog
No action required; this is the default behavior
Freeze the lock icon in the dimension value edit dialog
PT3 Q10: What feature is used to transform a solid cube into an open cube as shown
Shell
Hollow
Thin Wall
Box
What assembly relationship is used to "glue" two faces together (Like a lid on a box)
Center Plane
Angle
Mate
Axial Align
When creating a cutout in the assembly environment, which option does not physically change the part files?
Created synchronous part features if possible
Create part features
Create Assembly-Driven part features
Create Assembly features
After dragging in part from the Parts Library into an assembly, and while in the Assemble command, which key-combination can be used to rotate model being placed?
Select a face, press the SHIFT key and drag with the left mouse button
Press the scroll wheel and drag the mouse
Select a face, press the ALT key and drag with the left mouse buttom
Select a face, press the CTRL key and drag with the left mouse button
what command would you use to manually rotate an under-constrained wheel in a vehicle assembly
ERA
Drag Component
Drive part
Move Component
What command is used to duplicate a part and then modify it
Move with Copy
Duplicate Component
Replace Part with Copy
Replace Part
To add a gap between faces that are currently mated together, ___________________
Right click on the Mate relationship and suppress
You must delete the mate and recreate it
Select the mate relationship and edit the offset value
Select the mate relationship and set the option to float
When placing a bolt in a hole, what assembly relationship combines a face mate in an axial alignment
Insert
Path
Math
Connect
Can the synchronous parts in the assembly be copied using the steering wheel
Only if the part contained both synchronous and ordered features
Only if the synchronous features are converted to construction in the part
No only ordered parts can be copied
Yes
How can you turn off the display of one of the parts in a subassembly
Double click the part to hide
Expand the subassembly in the PathFinder and uncheck the box next to the part to hide
Uncheck the box next to the top-level assembly
Right-click on the top-level subassembly and click hide from the pop-up menu
Which assembly relationship can be used to define the travel of an under-constrained component by relating to a sketch?
Cam
Path
Angle
Limit
What command enables you to place multiple views at initial placement
Auxiliary Views
Multiple Views
Principal Views
View Wizard- Drawing View Layout
Which view type would you use to enlarge small features on a specified area of drawing view?
Auxiliary View
Broken-Out view
Detail View
Section View
A smart dimension cannot be used to annotate which of the following?
Area
Distance between key-points
Radius
Length of a line or edge
Which view type would you use to dimension features not normal to the orthogonal views of the drawing
Auxiliary View
Broken-Out View
Section view
Detail View
PT5 Q5: What does it mean when a gray border surrounds the drawing view?
All links to all parts are broken
A component has been changed outside the assembly and it must be updated
the drawing view must be recreated
the views are not aligned
Modifying which element enables you to change the distance the balloons are placed from the model in an assembly drawing
Alignment Set
Balloon Circle
Alignment Shape
Balloon Offset
Which command allows you to fold off views from a placed drawing view?
Section view
Auxiliary View
Detail View
Principal View
What option is used in the Callout Properties dialog to extract hole information directly from the 3D
Feature Callout
Symbols and Values
Property Text
Reference Text
