Worksheets1(B) Auto II Final Assessment
Total questions: 60
Worksheet time: 30mins
Name
Class
Date
1.
1. Air bags and seat belts are part of the vehicle’s ______________________________ system.
a)
Safety
b)
Steering
2.
2. The radiator of a vehicle is part of its ____ system.
a)
A. lubrication
b)
B. cooling
3.
3. Which of the following is NOT part of an engine?
a)
A. Muffler
b)
B. Oil Pan.
4.
4. The air conditioner is part of the vehicle’s cooling system.
a)
True
b)
False
5.
5. An auto shop normally includes a __________.
a)
A. repair area
b)
B. class room
c)
C. Computer lab
6.
6. Most accidents that occur in the auto shop are the result of broken safety rules.
a)
A. True
b)
B. False
7.
7. What should be worn when working around any airborne impurities?
a)
A. Gloves
b)
B. respirator
c)
C. Safety Glasses
d)
D. All The Above
8.
8. The part of the shop area used to store shop tools, small equipment, and supplies is the ________.
a)
A. repair area
b)
B. tool room
9.
9. If debris or chemicals accidentally get into your eyes, flush your eyes with ________.
a)
A. wet towel
b)
B. eyewash station
10.
10. The types of accidents that can occur in the auto shop are ___________.
a)
A. Chemical burns
b)
B. Physical injuries
c)
C. Explosions
d)
D. Electrical shock
e)
E. All the above
11.
11. Shop ventilation fans should be turned on any time _________.
a)
A. paint fumes
b)
B. exhaust fumes
c)
C. chemical fumes
d)
D. All the above
12.
12. What is often done to identify dangerous areas of an automotive shop so technicians are alerted to the potential hazards?
a)
A. areas maybe identified by brightly colored floor markings
b)
B. signs alerting people to the potential hazards
c)
C. Both A and B are correct
d)
D. Neither A or B is correct
13.
13. If an accident occurs in the shop who should be notified immediately?
a)
A. tool partner
b)
B. teacher
c)
C. custodian
14.
14. The area used for seminars, demonstrations, and other technician training activities is the _______.
a)
A. tool room
b)
B. classroom
c)
C. parking lot
15.
15. Evacuation routes show you how to quickly exit the building in case of __________.
a)
A. Fire
b)
B. Gas leak
c)
C. Both A and B
16.
16. The most dangerous and underestimated flammable in an auto shop is _______.
a)
A. brake Cleaner
b)
B. gasoline
c)
C. antifreeze
17.
17. When pulling a vehicle onto an alignment rack or into the shop _______.
a)
C. Both A and B are correct
b)
A. the car should be pulled onto the rack slowly and carefully
c)
B. always have a spotter to help pull vehicles into the auto shop stalls
d)
D. Neither A or B is correct
e)
Option 5
18.
18. Before a vehicles engine is started in the auto shop what safety step should be followed?
a)
A. the exhaust hose is connected
b)
B. lift the hood
c)
C. wheels turned to the left
19.
19. Safety glasses should be worn.
a)
A. in the classroom area
b)
B. should be worn anytime you are in the shop/lab
c)
C. while using the restroom
20.
20. The type of fire extinguisher used in our shop is _______ fire extinguisher.
a)
A. Type A
b)
B. Type B
21.
21. The dust that is known to be cancer causing is __________.
a)
A. asbestos
b)
B. rubber
22.
22. When lifting heavy items you should lift with your back not your legs.
a)
A. True
b)
B. False
23.
23. If the ground prong is not on an electronic power tool what could happen?
a)
A. Electrical current to pass through your body.
b)
B. Cause you to have a heart attack
24.
24. Periodic shop safety inspections should be performed to make sure the shop is safe.
a)
A. True
b)
B. False
25.
25. Identify the following hand tool
a)
A. Needle nose pliers
b)
B. Diagonaol cutting pliers
26.
26. Identify the following hand tool
a)
A. Combination wrench
b)
B. Adjustable wrench
27.
27. Identify the following hand tool
a)
A. Slip joint pliers
b)
B. Combination Pliers
c)
C. Most common type of pliers
d)
D. All the above
28.
28. Identify the following hand tool
a)
A. Body hammer
b)
B. Ball pean hammer
29.
29. Identify the following hand tool
a)
A. Six point socket
b)
B. Deep socket
30.
30. Identify the following hand tool
a)
A. Box end wrench
b)
B. Combination wrench
31.
31. Identify the following hand tool
a)
A. Extention
b)
B. Ratchet
c)
C. Drain plug puller
32.
32. The type of mallet that could be used to install hub caps is the _________ mallet.
a)
A. rubber
b)
B. sledge
33.
33. General tool safety rules are ______.
a)
A. purchase quality tools
b)
B. keep tools organized
c)
C. keep tools clean
d)
D. all the above
34.
34. Any operation that will keep a vehicle in good running condition is a definition of __________.
a)
A. General maintenance
b)
B. Vehicle maintenance
35.
35. What could be void if incompatible fluids, incorrect service procedures, or improper intervals are not performed?
a)
A. Warranty
b)
B. Driver license
36.
36. What temp should the engine be when checking the oil level?
a)
A. Engine off and cold
b)
B. Engine off engine warm
37.
37. When checking the fluid level on an automatic transmission.
a)
A. The gear selector should be in drive engine off
b)
B. The gear selector in park engine running
38.
38. Power steering fluid level _________.
a)
A. Should be checked with the engine running
b)
B. Can be checked on some vehicles by removing a dipstick from the power steering pump
39.
39. What type of batteries are used in most modern automobiles?
a)
A. Gell batteries
b)
B. Maintenance free batteries
40.
40. Common causes of fluid leaks include __________.
a)
A. Seals
b)
B. Bad gaskets
c)
C. Hoses
d)
D. All the above are correct
41.
41. Lubricating high-friction pivot points on the suspension, steering, and drive-train systems is the definition of?
a)
A. Grease job
b)
B. Service interval
42.
42. The tool used to force grease into small fittings is a ________.
a)
A. Grease gun
b)
B. Grease valve
43.
43. The amount of time (in months) or the number of miles between recommended service checks or maintenance operations is the definition of __________.
a)
A. Grease job
b)
B. Service interval
44.
44. When checking problem areas, some areas to inspect would be the __________.
a)
A. Water hoses
b)
B. Vacuum hoses
c)
C. Windshield
d)
D. all the above
45.
45. The function of wheel weights is?
a)
A. Offset the heavy area of the wheel and tire
b)
B. Offset the heavy area of the hub assembly
46.
46. Wheels can be made of what materials?
a)
A. Magnesium
b)
B. Steel
c)
D. All the above
47.
47. Today’s tires are filled with air meaning they are ____________.
a)
A. systematic
b)
B. run flat
c)
C. pneumatic
48.
48. The three basic parts of a wheel bearing are the ___________, ____________, and the __________.
a)
A. Inner race, inner retainer, and the balls or rollers
b)
B. balls or rollers, inner race, and the outer retainer
c)
C. outer race, balls or rollers, and the inner race
49.
49. The tire that has the plies and belts running at different angles; lie under the tread area only, is what type of tire?
a)
A. Radial ply tire
b)
B. Belted bias ply tire
50.
50. Why is the inner face of the lug nut tapered?
a)
A. To help with tire balancing
b)
B. To center the wheel on the hub.
51.
51. A maximum recommended inflation pressure of what psi. is common for many tires?
a)
A. 25 psi
b)
B. 32 psi
52.
52. A standard wheel consists of the __________ and the _____________.
a)
A. Rim
b)
B. Spider
c)
C. bead
d)
D. Both A and B are correct
53.
53. Tires that have an extremely thick sidewall construction so they are still usable with a loss of are pressure are what type of tires?
a)
A. self-sealing
b)
B. run-flat
54.
54. The marking on the tire sidewall give information about?
a)
A. Tire size
b)
B. Manufacturer
c)
C. All the above
55.
55. High-performance tires designed to rotate in a specific direction to minimize hydroplaning are?
a)
A. Directional
b)
B. Run-flat
56.
56. Today’s vehicles use tubeless tires.
a)
A. True
b)
B. False
57.
57. What does a greater number of plies or higher ply rating generally indicate?
a)
A. A less load carrying ability.
b)
B. A greater load carrying ability.
58.
58. The spring loaded air valve that threads into the valve stem is called the _______.
a)
A. valve air chuck
b)
B. valve stem
c)
C. valve core
59.
59. The item that protects the air valve and stem threads from dirt, moisture, and damage is _______.
a)
A. valve stem
b)
B. valve cap
60.
60. When installing a tire on the wheel, lubricate the _______.
a)
(A) inner and outer beads
b)
(B) tread
100 %
