NEW
Font size
WorksheetsPennsylvania Driver's Manual Quiz
Total questions: 50
Worksheet time: 25mins
What should you do before changing lanes or merging with traffic?
Speed up quickly
Signal your intentions
Honk your horn
Flash your headlights
What is the minimum age to apply for a non-commercial learner's permit in Pennsylvania?
14 years
15 years
16 years
17 years
What is the minimum number of hours of behind-the-wheel skill-building required for drivers under 18 in Pennsylvania?
50 hours
65 hours
30 hours
75 hours
What is the minimum age to apply for a Pennsylvania driver's license if you are a resident?
14 years
15 years
16 years
17 years
What are the driving hour restrictions for a junior driver's license in Pennsylvania?
10 p.m. to 6 a.m.
11 p.m. to 5 a.m.
Midnight to 6 a.m.
9 p.m. to 5 a.m.
What is the maximum number of passengers under the age of 18 allowed in a vehicle with a junior driver, who are not immediate family members, after the first six months of driving?
One passenger
Two passengers
Three passengers
Four passengers
What is a possible reason for failing the Road Test?
Not using turn signals
Using headlights
Adjusting mirrors
Wearing a seatbelt
What should you do when you see a STEADY YELLOW LIGHT?
Speed up to pass through the intersection.
Stop immediately, regardless of your position.
Slow down and prepare to stop.
Turn left without stopping.
What does a STEADY GREEN LIGHT indicate?
Stop and wait for a red light.
Drive through the intersection if the road is clear.
Turn left only.
Stop and yield to all traffic.
What does a STEADY RED ARROW mean?
You may turn in the direction of the arrow.
You must stop and not turn in the direction of the arrow.
You can proceed straight.
You should speed up to clear the intersection.
What does a flashing red light mean?
Slow down and proceed with caution.
Stop completely, look both ways, and proceed only when clear.
Yield to oncoming traffic and pedestrians.
Turn in the direction of the arrow with caution.
What should you do at a non-functioning traffic light?
Treat it as a green light.
Treat it as a four-way stop sign.
Proceed with caution.
Yield to oncoming traffic.
What does a steady red "X" over a lane mean?
You may use the lane.
You must change lanes.
You are not allowed to use the lane.
You may only turn left.
What should pedestrians do when a steady WALK signal is displayed?
Start crossing, but be alert for turning vehicles.
Do not start to cross.
Stop and wait for the next signal.
Run across quickly.
What is the speed limit when school zone signals are flashing?
10 mph
15 mph
20 mph
25 mph
What should you do if there are no signals at a railroad crossing?
Speed through quickly.
Stop, look, and listen for any approaching train.
Ignore and proceed as usual.
Wait for a train to appear before stopping.
What shape is a STOP sign?
Octagon (8-sided)
Triangle (3-sided)
Circle
Rectangle
What should you do when you see a YIELD sign?
Slow down and give the right-of-way to pedestrians and approaching cross traffic
Stop completely and wait for a green light
Speed up to clear the intersection quickly
Ignore it if there is no traffic
What is the purpose of a RAILROAD CROSSBUCK SIGN?
To alert drivers to treat it as a YIELD sign at railroad crossings
To indicate a pedestrian crossing
To show a speed limit near railroads
To mark a no-parking zone
What does this sign indicate?
You can enter if the road is clear.
Do not drive onto the street or ramp in the direction you are heading.
You must stop and wait for a signal.
You can enter if you are turning left.
What is the purpose of this sign?
To indicate a pedestrian crossing.
To catch your attention if you accidentally turn onto the street or ramp.
To show a parking area.
To indicate a speed limit.
What does this sign mean?
Traffic is allowed to move in both directions.
Traffic is allowed to move only in the direction the sign is pointing.
You can park on either side of the street.
You must yield to oncoming traffic.
What does this sign indicate?
The road is a single lane.
The highway is a two-way road without a median.
The road you are on intersects with a divided highway.
The road is closed for construction.
What actions are prohibited this sign?
Making a left turn.
Making a right turn.
Making a complete turn to go in the opposite direction.
Parking on the street.
What does this sign indicate?
The lane is for through traffic only.
The lane is reserved for the exclusive use of left-turning vehicles.
The lane is for right turns only.
The lane is for parking only.
What is the purpose of this sign?
To direct drivers to keep to the right of the traffic island or divider.
To indicate a left turn is required.
To signal a stop is ahead.
To allow parking on the right side.
What does this sign indicate?
The signal controls right turn movements.
You must stop immediately.
Left turns are prohibited.
You can only go straight.
What does this sign indicate?
The maximum legal speed under ideal conditions is 65 mph.
You must drive exactly 65 mph.
The minimum speed is 65 mph.
You can drive as fast as you want.
What is this sign used for?
It marks areas reserved for disabled persons or severely disabled veterans.
It indicates a no-parking zone.
It allows parking for everyone.
It is used for emergency vehicles only.
What shape are most warning signs?
Circular with red symbols
Square with blue symbols
Diamond with black symbols
Rectangular with green symbols
What do chevron signs indicate?
A straight road ahead
A sharp change in the direction of the road
A pedestrian crossing
A stop sign ahead
What should a driver do when approaching this sign?
Speed up and stay in the right lane
Slow down and stay in the center of the lane
Maintain speed and change lanes
Stop completely and wait
What does this signs indicate?
A single sharp curve
Two curves in opposite directions
A straight road
Lane shift to the right
What does this sign indicate?
There are three or more curves in a row on the road ahead.
The road is straight for the next mile.
There is a steep hill ahead.
The road ends in 500 feet.
What should a driver do when approaching this sign?
Speed up to make the turn quickly.
Slow down as much as possible to make a turn at an intersection.
Continue at the same speed.
Stop immediately.
What is the purpose of this sign?
To indicate a straight road ahead.
To warn of a side road entering from the right.
To show a pedestrian crossing.
To indicate a dead-end road.
What does this sign identify?
Areas where trucks can park.
Curves where trucks traveling at excessive speeds may roll over.
Roads where trucks are not allowed.
Truck repair stations.
What is the maximum speed indicated by the "Advisory Speed Signs" for a sharp left curve?
15 mph
25 mph
35 mph
45 mph
What does this sign indicate?
Traffic will be exiting the roadway.
Traffic may be merging into your lane from another roadway or ramp.
There is a pedestrian crossing ahead.
The road is closed ahead.
What does this sign mean?
Merging is necessary.
Entering traffic uses a new lane added to the roadway.
The road narrows ahead.
There is a stop sign ahead.
What is the purpose of this sign?
To indicate a pedestrian crossing.
To warn of merging with another roadway as some traffic is exiting and crossing your path.
To show a dead-end road.
To indicate a rest area.
What does this sign indicate?
The highway becomes a divided highway with two one-way roadways.
The highway merges into a single lane.
The highway ends and turns into a dirt road.
The highway has a toll booth ahead.
What should you do when you see this sign?
Merge into the left lane immediately.
Stay in your lane to the right of the centerline.
Speed up to pass other vehicles.
Turn around and find an alternate route.
What is the purpose of this sign?
To indicate a rest area ahead.
To show how roads join each other and warn of possible problems.
To signal a speed limit change.
To indicate a pedestrian crossing.
What does this sign advise drivers to do?
Increase speed to avoid skidding.
Reduce speed and increase following distance.
Turn off headlights.
Drive in the center of the road.
What does this sign indicate?
Areas where deer frequently cross and crashes with deer have occurred.
Areas with low clearance for vehicles.
Locations with a steep hill ahead.
Areas with a traffic signal ahead.
What should you do if you see this sign?
Ensure your vehicle is taller than the height listed.
Avoid entering if your vehicle is taller than the height listed.
Speed up to pass quickly.
Stop immediately and turn around.
What is the purpose of this sign?
To indicate a deer crossing area.
To warn of a lower or soft shoulder on the road.
To signal a traffic light ahead.
To indicate a railroad crossing.
What should you do when you see this sign?
Speed up to climb the hill quickly.
Slow down and be ready to shift to a lower gear.
Stop immediately.
Turn around and find another route.
What does this sign mean?
A stop sign is present at the intersection.
A railroad crossing is ahead.
A traffic signal is present at the intersection ahead.
A bicycle crossing is ahead.
